My attempt to paint a large quantity of 15mm Fantasy Models by “Copplestone Castings” over the past week or so has finally come to an end, with somewhat fewer models having been completed than I'd hoped for. These models are part of a "Conan The Barbarian" project I plan to 'pick away at' having been inspired by the Matakishi Tea Party website Crom Rules found here http://www.matakishi.com/cromcampaign1.htm.
All three bear models from the bag ‘FM8 Shapechangers and Cave Bears’ have been fully based, as have three wolves from ‘FM10 Wolf Pack”. However, I had hoped to finish all fifteen of the Canis Lupus models as well as the three shapechangers (in Human guise carrying large axes).
Unfortunately, my experiment to try and get the wolves to appear more realistic by using a blend of washes and drybrushing has not been as successful as I hoped, and as a result my enthusiasm for these models has rather died. All of the wolves were orginally undercoated either Skull White or Astronomican Grey, and then washed with Devlan Mud. All the models were then drybrushed with more Grey. Disappointly the models then required a wash of Badab Black before having a drybrush of Adeptus Battlegrey in order for their details to beome visible (e.g. fur and facial features). This darker grey drybrush makes the figures look patchy, and in places has blotched out some of the fur’s detail.
In addition to my frustrations painting the wolves, my attempt to use an old pot of Terracotta paint for a red-brown look to the fur of one of the Cave Bears has meant that the model has required repainting, after areas of the paint rubbed off (revealing the metal underneath) whilst the model was being based and varnished. Only my experiment using Skull White and Gryphonne Sea in order to generate the impression of the fur of a Polar Bear seems to have been successful.
Fortunately, I've also finished painting the entire Command Section for my 6mm “GHQ Micro-Armour” Modern British Army. The Force’s Command Asset consists of three infantry bases (totalling twelve soldiers) and two vehicle bases (consisting of four Land Rover Defender 90’s).
COMING SOON - Realising that my enthusiasm for my Napoleonic French Command Stand was started to ebb, I turned to watching the DVD "Waterloo" in order to recharge my batteries... and have nearly finished painting the third of the four "Victrix" models I plan to use for the Command base.
Saturday, 28 January 2012
Friday, 13 January 2012
British Sixth Airborne Division - Part Three
I've finished the painting on both my “Victrix” Napoleonic French Lieutenant and Standard Bearer, but have put the remaining two models required for the Command stand’s completion temporarily to one side in order to allow me time for a mini-push on some 15mm models by “Copplestone Castings” and some 6mm Modern British by “GHQ Micro-Armour”.
I've also finished the first of the officer bases for my 20mm British Airborne Paratroopers by “Friend And Foe”. I plan to use the ‘Officer with map pointing’ as Major John Howard DSO, the officer who led the glider-borne assault on the German-held bridges across the Caen Canal and River Orne.
COMING SOON - As a complete aside I've started repainting a number of 28mm “Warhammer Fantasy” models from “Games Workshop”. The Empire miniatures were originally completed a couple of years ago, but now require rebasing and their white/flesh areas repainted in order to fit in better with the current block and wash painting style I employ. This will hopefully mean the little guys will finally see some tabletop action, after a couple of years tucked away in a box in the loft.
I've also finished the first of the officer bases for my 20mm British Airborne Paratroopers by “Friend And Foe”. I plan to use the ‘Officer with map pointing’ as Major John Howard DSO, the officer who led the glider-borne assault on the German-held bridges across the Caen Canal and River Orne.
COMING SOON - As a complete aside I've started repainting a number of 28mm “Warhammer Fantasy” models from “Games Workshop”. The Empire miniatures were originally completed a couple of years ago, but now require rebasing and their white/flesh areas repainted in order to fit in better with the current block and wash painting style I employ. This will hopefully mean the little guys will finally see some tabletop action, after a couple of years tucked away in a box in the loft.
Sunday, 8 January 2012
The Battle of Marengo Project - Part Six
I've finally based a third stand of Napoleonic French Line Infantry by “Victrix", having had them standing around for a few days. I hope their completition will now let me more tightly focus my painting on two of the four 28mm models I plan to use for the French Command base (i.e. officer and standard bearer).
The pair of miniatures have previously been fighting for my attention alongside a couple of 20mm metal World War Two models by “Friend And Foe”, as well as some other plastic “Victrix” French Infantry models that required their white areas to be boxed in. However, both of the “Friend And Foe” British Paratroopers (‘Officer with map pointing’ and ‘Radio operator’ from their Command bag) have now been fully painted and glossed, whilst three of the four “Victrix” Fusiliers have had their initial white areas finished (in preparation for each soldier to be fully painted next month).
COMING SOON - I've undercoated a further four “Friend And Foe” 20mm British Airborne Division models (predominatly from their Rifle Firing bag) with Calthan Brown in order to continue the slow-time progress of my Memoir 44 Project, but probably more importantly have started to prepare a number of “GHQ Micro-Armour” Modern British infantry, vehicles and armour so I can give my “Battlefield Evolution" project a big push (hopefully) later this month.
The pair of miniatures have previously been fighting for my attention alongside a couple of 20mm metal World War Two models by “Friend And Foe”, as well as some other plastic “Victrix” French Infantry models that required their white areas to be boxed in. However, both of the “Friend And Foe” British Paratroopers (‘Officer with map pointing’ and ‘Radio operator’ from their Command bag) have now been fully painted and glossed, whilst three of the four “Victrix” Fusiliers have had their initial white areas finished (in preparation for each soldier to be fully painted next month).
COMING SOON - I've undercoated a further four “Friend And Foe” 20mm British Airborne Division models (predominatly from their Rifle Firing bag) with Calthan Brown in order to continue the slow-time progress of my Memoir 44 Project, but probably more importantly have started to prepare a number of “GHQ Micro-Armour” Modern British infantry, vehicles and armour so I can give my “Battlefield Evolution" project a big push (hopefully) later this month.
Tuesday, 3 January 2012
The Battle of Marengo Project - Part Five
Painting has started in earnest upon three of the four “Victrix” plastic 28mm models I plan to use for the Command base of my first battalion of Napoleonic French Line Infantry. The paint schemes will be based upon the uniform plates found for the Standard-Bearer and Grenadier Drummer within “Austerlitz – The Empire at its Zenith” by “Histoire & Collections”, and that of a Lieutenant in winter quarters dress, 1810 in “The French Imperial Guard – The Foot Soldiers 1804-1815 also by “Histoire & Collections”. I hope to have both the Officer and Standard-Bearer finished within the next few days, in order to focus my attention on the stand’s Drummer and Porte-Aigle.
I'm currently basing up my third stand of four Fusiliers, so once the Command base has been completed I'll have already attained my monthly commitment of painting eight Napoleonic models per month for January. That will leave me a good three weeks clear for my painting to concentrate on some of the other projects I ended up putting to one side in 2011; projects such as doing Robert E. Howard's "Hyborian Age" using 15mm “Copplestone Castings", or "Battlefield Evolution: Modern Combat" using 6mm “GHQ Micro-Armour”, or even "Force on Force" using the 28mm models of “Empress Miniatures". Decisions decisions.
I'm currently basing up my third stand of four Fusiliers, so once the Command base has been completed I'll have already attained my monthly commitment of painting eight Napoleonic models per month for January. That will leave me a good three weeks clear for my painting to concentrate on some of the other projects I ended up putting to one side in 2011; projects such as doing Robert E. Howard's "Hyborian Age" using 15mm “Copplestone Castings", or "Battlefield Evolution: Modern Combat" using 6mm “GHQ Micro-Armour”, or even "Force on Force" using the 28mm models of “Empress Miniatures". Decisions decisions.