"I Didn't Know You Were The Sundance Kid When I Said You Were Cheating."

 "If I draw on you you'll kill me."

This 28mm scale metal model is produced by “Great Escape Games", and can be purchased as part of their DMH306 Butch & Sundance two-figure set for Dead Man's Hand. The sculpt is clearly strongly influenced by actor Robert Redford's portrayal of the Sundance Kid in the 1969 Western "Butch Cassidy and the Sundance Kid", and depicts the outlaw's famous pose during his fatal shoot-out with the Bolivian Army.

Being rather ignorant of casting issues and concerns, I must admit to being rather surprised that this miniature came in two pieces. But a quick dab of super-glue soon seemingly fixed one of the gunslinger's arms in place, so the entire ensemble could be primed using a couple of coats of "Citadel" Abaddon Black. At this stage I also noticed that one of the bank robber's pistols was mis-cast and missing its barrel. However, I figured there was still enough of the hand-weapon for such a flaw to be overlooked on the gaming table.

"Exterminate. Exterminate!"

The Sundance Kid was dry-brushed with "Vallejo" Heavy Charcoal and drenched in "Citadel" Nuln Oil. I then began the process of 'picking out' all of his details, using a combination of "Vallejo" Heavy Brown and "Citadel" Agrax Earthshade on his vest, and "Vallejo" Heavy Warmgrey with "Citadel" Carroburg Crimson" for his shirt. I also carefully traced out the outlaw's holster string (tied around his leg) with a thin line of White Star by "Two Thin Coats", and later weathered the string with a little "Citadel" Agrax Earthshade.

The train thief's guns and buttons were subsequently coated in "Vallejo" Gunmetal and shaded in "Citadel" Nuln Oil, before I tackled his hair and moustache primarily with Skulker Yellow by "Two Thin Coats". These areas were darkened down with a careful application of "Citadel" Agrax Earthshade, and then highlighted with a patient dry-brush of (more) "Two Thin Coats" Skulker Yellow. As a final touch I decided to make the gunslinger's shoes and holster stand out a bit more from his all-black suit, by simply giving them a lick of pure "Citadel" Abaddon Black.

"Games Workshop" WIPs - This Sons of Horus Space Marine just needs a final touch-up

In addition to the Sundance Kid, I have also finished working on another 28mm metal, multi-part Dalek by "Black Tree Design". Available as either DW303 - Dalek, or as part of their DW1001 - Dalek Patrol Plus Heavy Weapons Dalek set, the "Doctor Who" monster was predominantly painted using Citadel Abaddon Black, "Vallejo" Sombre Grey, "Citadel" Nuln Oil, and Celestial Blue by "Two Thin Coats".

I've also managed to find a little more hobby time to plod on with the last of my Sons of Horus Space Marines by "Games Workshop". All of the main colours have now been 'blocked in' and in some places, even highlighted. However, I now need to carefully tidy my way up the 28mm plastic figure, ensuring that all its MK IV armour is finished, and any stray brushstrokes of "Vallejo" Gold or "Citadel" Abaddon Black are covered over...

"Our Father, Who Art In Heaven..."

"Hallowed be thy name."

This 28mm scale resin model of a Praying Mouse is produced by “Oathsworn Miniatures" and was part of the company's "Burrows & Badgers: Furs & Feathers" Kickstarter way back in July 2017. Known as 'Pious' Tom, the Mouse Monk, the figure was originally given away for free during the crowdfunding campaign to any "Pick'n'Mix" or "All In" backers. However, it has since become available to buy as part of the North East English company's "Burrows & Badgers" range on their website.

Due to the sculpt being knelt in prayer, I recall initially being somewhat tempted to plonk the small rodent onto one of the thin-lipped 40mm plastic circular bases I regularly use for my objective markers. However, in the end I superglued the tiny animal onto a lipped 30mm round base instead, and set about priming them with a couple of coats of "Vallejo" Heavy Sienna. The monk's robe was then shaded using a far amount of "Citadel" Agrax Earthshade, before being roughly dry-brushed in (more) "Vallejo" Heavy Sienna.

"There's nowhere to run!"

Having studied the mouse's 'official paint-job', I next applied a combination of "Vallejo" Heavy Brown and "Citadel" Agrax Earthshade to the critter's hood. This area was later highlighted with a careful dry-brush of (more) "Vallejo" Heavy Brown. The monk's hands, feet and tail were simply layered in "Vallejo" Heavy Skintone, washed with "Citadel" Agrax Earthshade, and subsequently treated to some additional lines of "Vallejo" Heavy Skintone along its fingers and toes.

For the figure's face, I decided to try something a little different (and definitely much quicker), by simply giving the area a rough dry-brush of "Vallejo" Heavy Skintone over a Heavy Sienna base-coat. The entire head was then shaded with "Citadel" Agrax Earthshade, and lightened with a much softer dry-brush of (more) "Vallejo" Heavy Skintone. Finally, the closed eye slits were just darkened with a streak of "Citadel" Abaddon Black, whereas the creature's fingernails and claws were given a lick of "Two Thin Coats" White Star, and darkened down with (even more) "Citadel" Agrax Earthshade.

"The Volgs are coming down everywhere!"

In addition to my impulse paint-job - having only discovered the partially-painted model in a drawer the day before I finished pigmenting it - I have also completed the last two 28mm metal single-cast British NBC soldiers produced by "Athena Miniatures" I bought at "Warfare" 2024. Largely finished using lots of "Vallejo" Heavy Grey and "Citadel" Agrax Earthshade, the troopers' semi-automatic L98 A2 rifles and lenses were treated to a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil.

I also splattered their ammunition pouches with some round(ish) dollops of “Vallejo” Heavy Brown, Luftwaffe Camouflage Green and Heavy Sienna, before drenching their equipment bags with a splash of "Citadel" Agrax Earthshade. This basic camouflage pattern - which I've previously used whilst painting my 15mm German Panzergrenadiers for "Flames Of War" - was subsequently highlighted back up with some extra splodges of (more) “Vallejo” Heavy Brown, Luftwaffe Camouflage Green and Heavy Sienna.

"Pity? I Have No Understanding Of The Word."

"It is not registered in my vocabulary bank. Exterminate!"

This 28mm metal, multi-part model of a Kaled Mark Three travel machine is manufactured by "Black Tree Design", and can be bought either individually as DW303 - Dalek, or as part of their DW1001 - Dalek Patrol Plus Heavy Weapons Dalek set, from their "Doctor Who" miniatures range. Created by Terry Nation, and brilliantly designed by Raymond Cusick, this sculpt is clearly based upon the Time Lord's most feared enemies - who first appeared in the 1963 six-part storyline now known as "The Daleks".

Probably assembled using a little super-glue some twenty plus years ago, this particular figure has always proved a remarkably off-putting figure to tackle on account of all the fiddly sensor globes I'd need to pick out with my brush-tip. This 'intimidation factor' was largely due to my plan to pigment the Dalek in its original colour scheme of silver with light blue bumps, and it wasn't until I recently decided to swap that palette out for the much more painter-friendly one seen in "Genesis Of The Daleks", that I finally decided to get the classic monster tabletop ready.

"Titan Forge" WIPs - This Death Knight's armour has been base-layered and shaded

I therefore treated the model to a couple of coats of "Vallejo" Sombre Grey, and began the odious task of encircling all its sensor globes with some thinned-down "Citadel" Abaddon Black. Once this process was completed, I then drenched the entire miniature in "Citadel" Nuln Oil, and gave its upper half a careful drybrush with (more) "Vallejo" Sombre Grey.

With the 'basics' finished I moved on to 'picking out' some of the Dalek's much smaller details, using a photograph of the Masterpiece Collection Maxi Bust Genesis Dalek by "Forbidden Planet" as a guide. I therefore applied some "Vallejo" Gunmetal and "Citadel" Nuln Oil to the machine's manipulator arm, dry-brushed it with (more) "Vallejo" Gunmetal, and plonked the infamous sink-plunger with some "Citadel" Abaddon Black.

"Titan Forge" WIPs - These two Death Dogs have been 3D printed, based and primed

I also gave its deadly gun-stick a layer of "Vallejo" Bronze, shaded it with "Citadel" Agrax Earthshade and dry-brushed the "standard personal Dalek weapon" using a little (more) "Vallejo" Bronze." Finally, I coated the creature's five-disc eyestalk in "Two Thin Coats" Celestial Blue and a splodge of "Citadel" Drakenhof Nightshade. Whilst its two low profile comm lights (on the dome) were simply spotted with "Vallejo" White, darkened in heavily watered down Carcharodon Grey by "Two Thin Coats", and re-dotted with a tad more "Vallejo" White.

Alongside my first "Black Tree Design" Dalek in more than two decades, I have also been working on a Death Knight and his three Death Dogs by "Titan Forge Miniatures". These four models for "Dungeons & Dragons" were created using "Elegoo" Water Washable Resin on a Mars 5 3D Printer, and are the start of a fantasy skirmish project I have planned to potter away at for the rest of 2025. For now though, I simply wanted to get the mighty undead warrior and his hounds undercoated, ready for some base layering...

"I Have Found The Doctor."

"And you have your orders. Kill him."

This pair of identical 28mm metal models are produced by "Black Tree Design" and can be bought individually as DW510 - Armoured Sea Devil from their "Doctor Who" miniatures range. "Awoken in 2084 A.D. by a group of Silurians who believed peace with humanity was impossible", the sculpts are clearly based upon the "amphibious Earth reptiles" seen in Johnny Byrne's 1984 television story "Warriors Of The Deep".

'Identified by historians as an example of a Silurian subspecies', the two figures were primed using a couple of layers of "Citadel" Abaddon Black, dry-brushed with "Vallejo" Heavy Charcoal, and subsequently sploshed in "Citadel" Nuln Oil. Some of the details on the shock troopers' uniforms, along with each creature's hand-weapon, were then 'picked out' using a little "Vallejo" Gunmetal and a dash (more) of "Citadel" Nuln Oil.

"Black Tree Design" WIPs - All of this Dalek's sensor globes have been patiently picked out

The Sea Devils' faces and paws were simply given a lick of "Vallejo" Heavy Sienna, before being shaded with some "Citadel" Agrax Earthshade. Finally, despite the models' costumes not quite matching the samurai-looking helmets shown on the small screen, I decided to treat their ornate headwear to a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil.

Due to currently still being rather obsessed with classic "Doctor Who", I thought it was about time I corrected a major omission in my collection, by finally putting a brush-tip to some old multi-part Daleks. Perhaps unsurprisingly to many, I actually own a considerable number of these "Black Tree Design" miniatures from the planet Skaro. But up until now, I've always been put off painting them due to the numerous sensor globes surrounding their Mark III Travelling Machines.

"Games Workshop" WIPs - This Sons of Horus Space Marine's gold areas have been completed

To get over this 'hump' I've therefore decided to paint a pilot piece up using the fairly straightforward blue-grey/black colour scheme seen in such broadcast storylines as "Genesis of the Daleks" and "Resurrection of the Daleks". Hopefully this'll encourage me to then produce another handful using the same palette, before moving on to the silver/blue livery depicted in some of the science fiction series' earlier adventures.

In addition, I have made more progress on the last of my MK IV wearing Sons of Horus from the long out of production (OOP) Betrayal At Calth boxed set. This particular "Games Workshop" Space Marine has proved a bit intimidating on account of being equipped with a Legion Vexilla (Legion Standard). However, now I've finished all the gold areas on the traitor's Maximus armour, I'm pretty sure I'll soon have him ready for a 31st Millennium battlefield...

"Doctor, Be Careful. It's Obviously A Dalek."

"You were lucky to find the Tardis in all that jungle."

This 28mm metal model is manufactured by "Black Tree Design" and can be bought as DW155 - Vicki from their "Doctor Who" miniatures range. "A student of a 25th century school system", the sculpt is clearly based upon one of the first Doctor's travelling companions as seen in David Whitaker's 1965 television story "The Rescue", and has languished in my collection for at least a decade. Indeed, I may even have purchased the figure as far back as twenty five years ago, when it was cast by "Harlequin Miniatures".

Probably primed with a double-helping of "Vallejo" White in late 2023, when I had planned to pigment the 'fourteen year-old space traveller' as part of a large "Doctor Who" project, the orphan then had her boots and dress base-layered in "Citadel" Abaddon Black. At the time I recall thinking that her legs were bare. However, having recently spotted some artwork capturing the young girl's early adventure on the planet Dido, it appeared that Vicki was actually wearing a pair of stockings.

"The outcome is certain. The ape primitives are no match for my warriors. They will be crushed."

Resultantly, the model's legs were treated to a combination of "Vallejo" Sombre Grey and "Citadel" Nuln Oil, before being carefully dry-brushed with a little more "Vallejo" Sombre Grey. This aforementioned illustration also convinced me that the time traveller's dress wasn't plain black either, so it was subsequently picked out in "Vallejo" Storm Blue, and later darkened down a bit with a splash or two of "Citadel Nuln Oil."

To be honest the actual casting on this piece was pretty poor, especially on the child's bare arms. So in the end I simply settled for giving all of Vicki's skin a coat of "Vallejo" Heavy Skintone and dash of "Citadel" Reikland Fleshtone. I then went back with an incredibly fine brush-tip to highlight some of the more flat areas back up. The companion's hair was painted with a base layer of "Two Thin Coats" Skulker Yellow, a dousing of "Citadel" Agrax Earthshade, and a dry-brush of (more) "Two Thin Coats" Skulker Yellow. In the photographs of actress Maureen O'Brien's on-screen character it seemed that her collar was decorated with a silver pattern of some kind. However, there was no such detail sculpted onto the dress which I could see, so considering how very small the figure was, I decided to leave the area bare.

"Great Escape Games" WIPs - Both Butch & Sundance have been primed and base-layered

Sticking with both "Black Tree Design" and "Doctor Who", I have also managed to finish another 28mm metal Sea Devil too - A classic monster from Peter Davison's tenure as the time travelling Doctor. Available as DW510 - Armoured Sea Devil, this miniature was predominantly painted using "Citadel" Abaddon Black, "Vallejo" Heavy Charcoal, "Citadel" Nuln Oil, "Vallejo" Heavy Sienna, and "Citadel" Agrax Earthshade.

Lastly, I simply haven't been able to resist starting work on the Butch & Sundance figures by "Great Escape Games", which I recently bought at "Beachhead" 2025. I must confess to being a bit surprised that the 28mm metal sculpts were multi-piece miniatures - albeit, they are dynamically posed. But once they were assembled, I've managed to get the beginnings of a base layer or two on the gun-slinging pair of outlaws for Dead Man's Hand.

"They Outnumber Us Ten To One!"

"We can't stop them!"

These two 28mm metal single-cast figures are produced by "Athena Miniatures" as part of their Apocalypse Survivors range, and are part of the eight-man squad found inside the Swindon-based company's AS11 British NBC set. Purchased as part of a much larger impulse buy whilst I was wandering around the stalls at "Warfare" 2024, these miniatures are based upon the disconcerting notion of Russia suddenly invading the United Kingdom following some great calamity - whether that be a nuclear strike, zombie incursion or some deadly extra-terrestrial attack.

Both models were undercoated with "Vallejo" Heavy Grey, and drenched in "Citadel" Agrax Earthshade. I then layered the soldiers' boots, gloves, gas masks and firearms with "Citadel" Abaddon Black. Lastly, the troopers' L98 A2 rifles and lenses were treated to a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil. I did consider adding a little "Vallejo" Heavy Grey to parts of their semi-automatic weapons, as seen in the official photographs I was using for a colour guide. However, I felt this would just make them 'disappear' amidst the NBC suit, so decided to leave well enough alone. 

"Games Workshop" WIPs - This Primaris Space Marine has been primed, shaded and dry-brushed

I did however want to mark them out from their Soviet opponents, so took some inspiration from the pictures of the figures' ammunition pouches, and splodged these equipment bags with some round(ish) dollops of “Vallejo” Heavy Brown, Luftwaffe Camouflage Green and Heavy Sienna. This basic camouflage pattern - which I unashamedly borrowed from my days painting 15mm German Panzergrenadiers for "Flames Of War" - was later splashed with “Citadel” Agrax Earthshade, before each area was highlighted back up with (more) “Vallejo” Heavy Brown, Luftwaffe Camouflage Green and Heavy Sienna.

In addition to my latest "Invasion! 1999" reinforcements, I have also started working on a 28mm plastic Primaris Space Marine I was very kindly sent for free by the "eBay" shop "ibstock_tackle". Now, to be brutally honest I have little interest in Warhammer 40K these days. But did fancy testing out a colour scheme for the Dark Angels Chapter which I could then later possibly apply to some of Lion El'Jonson's warriors from the Horus Heresy.

"Wargames Foundry" WIPs - Two members of the Moscow Militia

Admittedly, according to "Games Workshop" lore the Loyalists of that era were all dressed in black armour. However, I've had enough of painting miniatures "Citadel" Abaddon Black recently, and can't shake the mental image of the First Legion always being adorned in their (modern day) green hue. Resultantly, I wanted to see if I could come up with a palette I could use for both timelines, and felt this particular miniature would make the perfect pilot piece.

Finally, I've somehow found my enthusiasm for my Napoleonic project also gaining ground once again, so have dived into a couple more figures from the RN043 Moscow Militia with Muskets blister by "Wargames Foundry". I'm currently hoping to get a quartet of these marvellous Alan Perry sculpts finished before the end of the month, and perhaps then move on to some (more) French opponents, or perhaps the start of an Austrian Jäger unit..?

"The Narodnoe Opolcheniye..."

"...Was a Russian militia that fought in the French invasion of Moscow in 1812."

This 28mm scale metal model is produced by “Wargames Foundry", and can be purchased as part of their RN043 Moscow Militia with Muskets set. The figure is one of eight Napoleonic Russian soldiers sculpted by Alan Perry found in the blister, and has somewhat helped to re-enthuse me for my long-running Black Powder Age project on account of the infantryman's reasonably straightforward attire.

Being rather keen to follow this miniature's official paint-job as shown on the Newark-based manufacturer's website, I primed him using my usual mixture of "Citadel" Abaddon Black and Vallejo Surface Primer Black, and had his trousers base layered with "Vallejo" Neutral Grey. I then pigmented his winter jacket with plenty of "Vallejo" Sombre Grey, and thoroughly shaded both colours with "Citadel" Nuln Oil. As a final touch for this particular process, I went back with some (more) "Vallejo" Sombre Grey and dry-brushed the Russian's sleeves and the bottom of his greatcoat.

"The ape primitives are no match for my warriors."

All of the militia member's numerous straps, his belt, ammunition box, baggage and headwear were given a simple lick or two of "Citadel" Abaddon Black, before tiny little details such as the man's buckle and hat decoration were carefully picked out with "Vallejo" Gunmetal. These tiny areas were later washed with a spot of "Citadel" Nuln Oil. I also used this combination for all the metal areas of the infantryman's musket. Finally, I applied some "Vallejo" Heavy Sienna to the Russian's bushy beard, boots and any wooden elements of his firearm, and subsequently sploshed them all with "Citadel" Agrax Earthshade.

I'm rather pleased with myself for (finally) finishing this particular model, as I intend to also use him as the human manifestation for my Russian Werebear in "The Silver Bayonet" by "Osprey Games". Despite the figure carrying a musket rather a heavy weapon (as described in the rule-book), I figured the firearm could simply be unloaded, so he could just swing it like a club until such time as the fellow successfully transforms into his far furrier (and much stronger) form.

"They will be crushed."

Alongside my second Napoleonic miniature of the year, I have completed two more 28mm metal models by "Black Tree Design". Available as DW510 - Armoured Sea Devil from their "Doctor Who" range, this pair of identical sculpts were initially undercoated with a couple of layers of "Citadel" Abaddon Black, dry-brushed using some "Vallejo" Heavy Charcoal, and drowned in "Citadel" Nuln Oil. 

I next tackled some of the details on the aquatic race's uniforms, and ornate 'samurai-like' helmets, along with the creatures' hand-weapons, using a little "Vallejo" Gunmetal and a dash (more) of "Citadel" Nuln Oil. Lastly, the monsters' flesh was simply given a lick of "Vallejo" Heavy Sienna, before being shaded using some "Citadel" Agrax Earthshade...