"The War With The Dead Has Reached Its Third Night."

"Don't they know how many corpses there are in the world?"

This 28mm single-piece metal model of a Zombie Mistress is made by "Mongoose Publishing" and could be bought, until very recently, as Code JD20051 from the "Judge Dredd Miniatures Games" range sold by "Warlord Games". Calling upon her dark psychic powers, the Zombie Mistress can both "raise the dead and command them to fulfil her every whim", thereby keeping "the Justice Department off balance for weeks."

Despite predominantly being clothed with a raggedly skirt and flowing cloak, I initially underocated the undead sorceress with “Vallejo” Iraqi Sand and “Citadel” Thrakka Green. This 'undercoating' technique allowed me to see all of the sculpt's detail and identify which areas needed to be painted what colour. As I wanted to try and give the 'zed hag' a grungy dirty look I selected "Vallejo" Heavy Sienna for her skirt and gloves, Heavy Skintone for her decaying skin leotard and Heavy Red for her tattered cape. All these areas, along with her White skull knee-pads were then treated to a generous wash of "The Army Painter" Strong Tone Quickshade.

"A... A walking corpse! How do you stop - "

With the zombie's clothing finished, I then applied a combination of "Citadel" Ironbreaker to the razor-blades disconcertingly attached to the fingers of her handwear, and to her ankle armour. Finally I dirtied up her face with some more Strong Tone Quickshade and 'pikced out' her lifeless eyes with "Vallejo" White.

In many ways the Zombie Mistress is my least favourite of the Mega-City Undead range which 'Mongoose Matt' had produced. This dissatisfaction is largely due to the fact that the character didn't actually appear within the pages of "2000 A.D." and therefore isn't official "Judge Dredd" canon in my books. But it's also based upon the fact that the miniature 'headlined' the Zombie Horde $6,000 stretch goal which finally convinced me to pledge big in the company's October 2012 "Judge Dredd Miniatures Game: Block War" kickstarter; a fund-raising project which has astonishingly managed to actually outlive the "Judge Dredd" licence for "Mongoose Publishing"...

"Pick your target and shoot for their heads!"

My final contribution to Zombtober 2016 is another 28mm walking cadaver which has been assembled using plastic pieces taken from the "Mantic Games" "Kings Of War" Zombie Swarm and the metal 'bitz' found as part of "Warlord Games" Mega-City Zombie Horde pack. Painted 'in the main' using my combination of “Vallejo” Iraqi Sand and “Citadel” Thrakka Green, the zed's colourful clothing was created using "Vallejo" Turquoise for his tattered trousers and Verdigris for his tiny shoulder-pad. These areas were then washed with "The Army Painter" Strong Tone Quickshade and "Citadel" Reikland Fleshshade respectively.

I had recently been hoping to significantly expand my Mega-City One Undead Horde by picking up a few of "Warlord Games"  Zombie Horde Conversion Packs, but as their license for "Judge Dredd" has reached its end and the company "are currently planning the future for its range and game and re-negotiating our agreements with the brand owners", I thought I'd pick-up four Zombie Judge models from "Mongoose Publishing" to disassemble instead. Sadly, I've only so far been sent one of the models I paid for, with Matt Sprange stating that he is "very low on stock across the whole Dredd range at the moment" and only having "two Zombie Judges left" as a result...

Mega-City One Undead WIPs - These models have been primed in readiness for the next zombie breakout...

Unperturbed, I have subsequently taken a modelling knife to the Zombie Judge I have so far received from 'Mongoose Matt', and used pieces of it in order to convert a few more "Mantic Games" zeds into undead Mega-City One citizens. Initially I had simply planned to do a head-swap with one of the plastic "Kings Of War" sculpts. However whilst cleaning the Zombie Judge's gloved hand of flash the entire part broke clean off. Having examined the poorly-cast miniature, its metal is rather crumbly and gritty, so I have drilled the offending metallic fragments out of the broken piece and simply super-glued it onto the arm of a third brain-eating cadaver.

"What'ss The Matter, Ssskippp?"

"Heavy 4 is out of control! Robot units neutralise!"

This 28mm multi-part walking cadaver is predominantly made up of plastic pieces taken from the "Mantic Games" "Kings Of War" Zombie Swarm. But has been converted, using some of the metal 'bitz' from "Warlord Games" Mega-City Zombie Horde pack, into the living corpse of Judge Garson; the deceased skipper of Justice Department tank Heavy Four who fell under the deadly control of the Sisters of Death during "Necropolis" and murdered his entire vehicle's crew.

Like all my zeds for Zomtober 2016, the former Judge was undercoated with “Vallejo” Iraqi Sand and heavily washed with “Citadel” Thrakka Green. His exposed innards were then 'picked out' with "Vallejo" White, Heavy Red and Heavy Warmgrey before being treated to a veritable 'bath' of "Citadel" Carroburg Crimson.

"At the massive breach in Mega-City's West Wall, the legions of the dead have come calling - "

With the majority of the lawman's decaying corpse painted, I began applying some colour to the remnants of his Justice Department uniform, and decided to simply replicate the scheme I used on a far 'healthier' Street Judge a couple of years ago. As a result his remaining belt pouches, knee-pad and elbow-pad, as well as his tank helmet, were painted using "Vallejo" Heavy Grey and "Citadel" Thrakka Green. Whilst his shoulder-pad was treated to a combination of "Vallejo" Gold and "The Army Painter" Strong Tone Quickshade.

Having finished Judge Garson, or rather the remains that would later be re-animated by Sabbat the Necromagus during "Judgement Day", I thought I'd also apply the finishing touches to another unlucky inhabitant of Mega-City One. This somewhat hungry-looking citizen's undead flesh was painted identically to that of his fellow futuristic walking cadavers. However, as I wanted him to appear rather more colourful than some of his brain-chomping brethren, I painted his clothing with a mixture of "Vallejo" Squid Pink, Heavy Violet and Heavy Green.

Zombie Mistress WIPs - This model still requires some additional brown and green washes

As I only have time for one more posting before Zomtober 2016 finishes, I have been busily progressing the final couple of "Mongoose Publishing" Mega-City Undead miniatures in my collection. It's not clear just where 'Mongoose Matt' got his inspiration for having the Zombie Mistress sculpted, as I don't recall such a creature existing within the pages of the British comic book "2000 A.D.". But as this model came as part of my pledge for the overly long (and still running) October 2012 "Judge Dredd Miniatures Game: Block War" kickstarter, it seemed rude not to give her a lick of my paintbrush and finish her along with the rest of my zombies.

“The Class Served With Distinction In The Dominion War…”

A Federation fleet with the U.S.S. Brattain in the centre of the formation, and U.S.S. Lantree at the rear 

These two 6mm metal miniatures of an Oberon Class Destroyer can be found within “Irregular Miniatures” Imperial Fleet Spaceship range as code DYE3, and are the final two models that I painted as part of “Star Trek” September. Measuring 30mm in width and 35mm in length, these pleasingly detailed vessels make good proxies for the Miranda-class Federation starships featured throughout the American science fiction television series "Star Trek” and as a result will represent the U.S.S. Brattain and U.S.S Lantree.

Originally seen in the “Star Trek II: The Wrath Of Khan” motion picture, the Miranda-class would actually go on to be “present in several major Federation engagements against the Borg, including the Battle of Wolf 359 and the Battle of Sector 001.” In addition they also participated “in numerous Dominion War battles” such as the First and Second Battles of Chin’toka and the Battle of Cardassia.

Mega-City One Undead WIPs - This zombie predominantly just needs his face and shoulder-pad to be washed

Having painted one of these "Irregular Miniatures" sculpts before, both of the “escorts” were initially primed with two layers of “Vallejo” Heavy Bluegrey and washed with “Citadel” Nuln Oil. The vessels were then dry-brushed with more “Vallejo” Heavy Bluegrey, before having their impulse engines painted with “Vallejo” Heavy Red and their warp nacelles ‘picked out’ with Heavy Blue. These areas were then appropriately washed with either “Citadel” Carroburg Crimson or Asurmen Blue.

In the past I have had a nasty habit of drilling straight through the miniatures’ saucer sections whilst fitting them upon the old OOP “Games Workshop” ‘ball and socket’ flying stands I use for all of my “Irregular Miniatures” space ships. But on this occasion I somehow managed to enlarge the required holes without causing any damage to the models, and therefore didn’t need to find any ‘bitz’ with which to cover over a mistake. As a result both of these ‘untarnished’ vessels look slightly different to my U.S.S. Reliant; which required a piece from an old "Brigade Games" "Aeronef" mast in order to mask a ‘basing mishap’.

Mega-City One Undead WIPs - This Justice Department zombie from "Necropolis" is almost finished

With last month’s project now finally concluded, I have committed my meagre hobby-time to finishing off the few 28mm scale multi-part zombies I still want to complete as part of Zomtober 2016. These brain-eating plastic cadavers, based largely upon “Mantic Games” sculpts, have proved enormous fun to paint on account of their futuristic knee-pads and shoulder-pads, and the fact that they represent some of the unfortunate Mega-City One citizens from the “Judge Dredd” comic book event “Judgement Day”.

In addition I have managed to assemble one of the figures, using some “Mongoose Publishing” metal components, as a hapless Justice Department tank commander. This particular individual was driven insane by the Sisters of Death during the twenty-six part 1990 story “Necropolis” and had to be gunned down by robots after he killed his crew believing them to be living skeletons. The man’s corpse was then presumably reanimated, along with sixty million other citizens, during Sabbat the Necromagus’ subsequent attack upon Mega-City One.

"Gonna Squeeze The Life Outta You, Joe!"

"You're Going Nowhere, Joe!"

This 28mm single-piece metal model of a Zombie Judge is made by "Mongoose Publishing" and can be bought as Code JD20052 from "Warlord Games". The undead lawman is actually one of the more impressive-looking miniatures created by 'Mongoose Matt' as part of his infamously disorganised October 2012 "Judge Dredd Miniatures Game: Block War" kickstarter, and was unlocked early on in the campaign as part of a Zombie Horde $6,000 stretch goal.

The partially-dressed member of the Justice Department was undercoated with “Vallejo” Iraqi Sand and washed with “Citadel” Thrakka Green. As I wanted the figure to look suitably dank and rancid I painted his boots, knee-pads, belt, elbow-pad and glove with "Vallejo" Heavy Green as opposed to the colour Heavy Grey which I ordinarily use for my custodians of Mega-City One. These areas were then treated to a coat of more "Citadel" Thrakka Green, before I tidied up the Judge's ripped uniform with Abaddon Black.

"Shoulda stayed in your graves, Wormfodder!"

The model's belt buckle, shoulder-pad, and badges were 'picked out' using a combination of "Vallejo" Gold and "The Army Painter" Strong Tone Quickshade. Whilst in an effort to maintain the illusion that this Judge was dead and starting to rot, I washed his "Vallejo" Heavy Red helmet trim with the much darker "Citadel" Carroburg Crimson, as opposed to my normal "Citadel" glaze of Bloodletter.

I would imagine the inspiration for the Zombie Horde's stretch goal, as it included "a number of zombies in ragged Mega-City One garb", was probably Garth Ennis' "2000 A.D." comic book story event "Judgement Day". However, as I currently only own just the one Zombie Judge miniature I plan to use him as the undead Judge Joseph Dredd depicted within the 1984 serial "City Of The Damned". Killed by a mutated future clone of Owen Krysler, the Judge Child, in 2120, this "mindless undead zombie" unceasingly stalked his time-travelling younger self and Judge Anderson until the "unstoppable" zed was transported back to 2107 and "deactivated"...

Mega-City One Undead WIPs - This zombie predominantly just needs his exposed brain to be painted

Alongside my brain-eating Judge Dredd I have also finished painting one of the remaining 28mm multi-part zombies I own which has been assembled from parts made by both "Mongoose Publishing" and "Mantic Games". Like Joe, this particular shambling ghoul was initially primed with “Vallejo” Iraqi Sand and then washed with “Citadel” Thrakka Green. But once dry actually had his shredded clothes painted using "Vallejo" Squid Pink and his belt pouch with Verdigris. Both of these areas were subsequently washed with "Citadel" Reikland Fleshshade. As a final touch, and in order to make the walking dead look especially futuristic, I gave the zed a "Vallejo" Heavy Blue Mohawk and generously washed it with "Citadel" Asurmen Blue.

With just one more week of Zomtober 2016 left, I still have a handful more of my Mega-City One Undead Horde left to paint. Having 'set down my tools' on my other (side) projects in order to get them finished in time I have made some sterling progress on a third "Mongoose Publishing" cadaver, and hope to have it, along with yet another zed completed within the next few days.

"A Carved Or Formed Grotesque..."

"Gargoyles are usually an elongated fantastic animal..."

These four wonderfully characterful 28mm scale resin Gargoyles are made by "Wargames Terrain Workshop" and can be purchased from their Graveyard Scenery range. The statues range in height from 27mm to 30mm and have all been based on the thin-lipped 40mm circular bases I use as stands for my scenery/objective markers.

Each model was initially undercoated with an old OOP pot of "Citadel" Adeptus Battlegrey and washed with Nuln Oil. They were then all dry-brushed with more Adeptus Battlegrey and given a final highlight of "Vallejo" Heavy Bluegrey.

Grim Reaper Statue WIPs - The intimidatingly tall resin model just needs its scythe to be washed and dry-brushed

In addition to the weather-worn Gargoyles I have also purchased one Dave Stone's chillingly impressive Grim Reaper statues. This 98mm tall resin piece has also been super-glued to a 40mm circular base and been undercoated with "Citadel" Adeptus  Battlegrey, and I am now slowly building up his impressive bronze scythe in order to prepare it for a generous wash of Nihilakh Oxide.

With Zomtober 2016 now two-thirds of the way through I have been busy painting the remaining few walking cadavers I want to submit before the challenge concludes. To that end I have spent the vast majority of my recent hobby time working on some of the Mega-City One undead I received from "Mongoose Games" as part of their 'controversial' 2012 “Judge Dredd Miniatures Game: Block War" Kickstarter.

Mega-City One Undead WIPs - Both of these living dead still require some considerable work

The first of these is a Judge Zombie which fortunately is proving a far more enjoyable experience than the one I had whilst painting his 'healthier' colleagues a few years ago. Back then I felt the company's Judge sculpts were inconsistently sculpted with missing buckles, different styled helmets and shoddy casting. I'm pleased to say that certainly hasn't been the case with this particular miniature and his somewhat darker palette to the one I ordinarily use for my Mega-City One lawmen has really helped give the brain-eating Judge a darkly dank look.

I have also been pottering away on those zeds which I have super-glued together using components from both "Mantic Games" and "Mongoose Publishing". As I often try and work on a pair of models simultaneously, swapping between the two as the paint dries on the other, I have chosen a more sombre green/purple colour scheme for my next ghoul; albeit I am contemplating a bright "Vallejo" Squid Pink shoulder-pad simply to make the figure stand out on the tabletop...

“Born From Sickness And Despair…”

"As the Nurgling matures it feeds upon the filth of the Great Unclean One and pops out."

These two 28mm multi-part plastic swarms of Nurglings are made by “Games Workshop” and are two of the three such “stacks” that can be created using the “variety of characterful” components found within the “Gleeful Castoffs” "Age Of Sigmar" set. Indeed the company boasts that “you can actually make twenty-seven combinations of Nurgling towers” using their sprues should you purchase enough boxes of the “wriggling little horned beasts”, and that number doesn’t include the additional “individual Nurglings” the kit comes with “for using on bases for the rest of your army.”

"Sometimes Nurglings are gifted to Heralds or other powerful Chaos Champions to act as a living litter for him."

As a result of the complexity of these 'builds' I decided to paint the front, middle and back rows of each 40mm circular base separately and then later superglue the towers together after they had been varnished. This meant that, having placed each line of Khan’gurani’I on an individual stand, they were all initially undercoated with “Vallejo” Heavy Khaki and washed with “Citadel” Thrakka Green. The tiny toothed daemons were then dry-brushed with more “Vallejo” Heavy Khaki before having details such as their horns, “sores, cuts, lumps and opened orifices” coated with “Citadel” Abaddon Black.

With all the miniatures’ groundwork completed, I started painting the Nurglings’ internal organs with either “Vallejo” Heavy Red or Heavy Warmgrey, and washed the grisly sculpts with a combination of “Citadel” Thrakka Green, Agrax Earthshade and Carroburg Crimson. As a final touch their numerous zits were ‘picked out’ with a dollop of “Vallejo” Heavy Ochre and given a heavy covering of “Citadel” Reikland Fleshshade.

"A unit of Nurglings has three or more models."

Wonderfully timed to coincide with Zomtober 2016, I have taken possession of my pledge from “Studio Miniatures” and their “Hollywood Havoc” Kickstarter. These “highly detailed” 28mm models are part of their zombie horror range “Z-Clipz” and supposedly depict “the unlucky staff dressed as Hollywood’s greatest stars” who were devoured whilst working at the Funland Theme Park during the zed apocalypse.

The first three brain-eating cadavers I plan to work on are Zombie Lee, Zombie Charlie and Zombie Norma Jean; undeniably characterful undead versions of Bruce Lee, Charlie Chaplin and Marilyn Monroe. My collection also contains the survivor versions of these silver screen personalities, alongside the company’s four “Monster Madness Haunted House” figures. However as I’m currently painting a number of other walking dead miniatures as part of my "Mongoose Publishing" Mega-City One Zombie Horde I thought I’d start with the infected versions first.

"Hollwood Havoc" WIPs - Bruce Lee, Charlie Chaplin and Marilyn Monroe

What is somewhat disappointing about these models though is their seemingly slender size when compared to other zombie models I own. The Kickstarter was keen to emphasise that “all of these new miniatures are fully compatible with our existing modern zombies and survivors” and highlighted you could “mix them together for some movie madness” if you wanted. I don’t actually own any other “Studio Miniatures” sculpts to compare them against, but have found these latest acquisitions to be slightly diminutive when placed alongside even my slender “Zombicide” plastic zeds…

"We're Outnumbered A Hundred To One!"

"Get back-up here now!"

This 28mm multi-part zombie is made from component parts manufactured by both "Mongoose Publishing", as part of their October 2012 "Judge Dredd Miniatures Game: Block War" kickstarter, and "Mantic Games", and represents one of the many unfortunate citizens of Mega-City One who died during "Necropolis" and later rose from their graves so as to taste Justice Department flesh in "Judgement Day". The brain-eating cadaver is really nicely sculpted, apart from an overly large amphibian-like left hand, and undoubtedly wears it's recognisably futuristic knee-pad with pride.

Having assembled the model using some of the metal Zombie Horde Conversion Pack 'bitz' now sold by "Warlord Games", the walking cadaver was undercoated with “Vallejo” Iraqi Sand and haphazardly washed with “Citadel” Thrakka Green. As I wanted the walking corpse to be as colourful as possible I then painted his clothes using "Vallejo" Heavy Ochre, Heavy Blue and Heavy Orange. These areas were washed with "The Army Painter" Strong Tone Quickshade, "Citadel" Asurmen Blue and Reikland Fleshshade respectively. Finally the zed's rancid body was made to look even more repulsively bloody courtesy of some “Vallejo” Heavy Red and “Citadel” Carroburg Crimson.

Mega-City One Undead WIPs - This unlucky blue mohawk adorned citizen will forever wear pink

With the third of my Zomtober 2016 submissions completed, I have made some steady progress on the next of my “Judge Dredd” zeds. One of the aspects of this mini-project I'm especially enjoying is trying to use as many brightly coloured paints as I own in order to try and replicate the garish nature of Mega-City raiment. As a result I have found myself opening some long-sealed "Vallejo" pots of Squid Pink and Verdigris, as well as feverishly dipping my paintbrush tip into such oft-forgotten pigmented hues like Heavy Orange and Turquoise.

A somewhat new company to recently capture my imagination is "Wargames Terrain Workshop". A predominantly scenery-focused company which offers "a range of highly durable, finely detailed modular terrain gaming boards and resin cast scatter scenery", they caught my eye with their current new line of stone gargoyles. Designed to "keep the spirits at bay", I have already super-glued all four the the sculpts from their Graveyard Scenery range on to my usual thin-lipped 40mm circular 'objective' bases and busied myself undercoating, washing and dry-brushing them with a combination of "Citadel" Adeptus Battlegrey and Nuln Oil.

Gargoyle WIPs - The four different statues just require some final highlights before being finished

The somewhat rough-hewn pieces of masonry still require an extra lighter highlight and proper basing, but have already encouraged me to purchase a few more items from the Gloucestershire-based manufacturer's webstore. These 'very necessary' additions to my collection includes one of their wonderfully foreboding statues of the Grim Reaper, as well as a number of cemetery walls and posts which should help complete all the items I require in order to finally game last year's Zomtober project "Doctor Who And The Seeds Of Doom"...