"One Ship Against An Entire Fleet?"

"That's a helluva plan B!"

This multi-part 32mm scale resin model of a Female Human was bought as part of the Star Trek Adventures: Next Generation Away Team Set by "Modiphius Entertainment" and is sadly no longer available as a physical figure. However, the sculpt can still be purchased from the company as either an individual STL (Standard Triangle Language) file, or as part of their Star Trek Adventures - Print At Home - TNG Away Team Set.

The 'commonplace little creature' was initially undercoated in "Citadel" Abaddon Black, and roughly dry-brushed with "Vallejo"Heavy Charcoal, before I 'picked out' her phaser and tricorder using a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil. I then applied a little "Vallejo" Turquoise to the miniature's uppermost uniform to mark her out as belonging to Starfleet's science/medical division. This area was later shaded with a little "Citadel" Drakenhof Nightshade, before being dry-brushed with a smidgeon more "Vallejo" Turquoise.

"Modiphius Entertainment" WIPs - Three more members of the Away Team readying themselves for teleportation

The Ensign's Federation insignia was carefully traced out using a dollop of "Vallejo" Gold and later washed with a little "Citadel" Agrax Earthshade. Finally, I eventually went with some "Citadel" Doombull Brown for the figure's hair, darkened it down with plenty of Agrax Earthshade, and tried to highlight it back up with a delicate dry-brush of (more) Doombull Brown.

I did strongly consider giving the rest of the model's uniform a thorough drowning in "Citadel" Nuln Oil - which is something I do for a lot of my predominantly black-costumed miniatures. However, these days I find that the "Vallejo" Matt Varnish I regularly use to protect my paint-jobs dries a little sticky, and this inevitably attracts oils from my fingers as a result. This handling tends to therefore act as a 'natural way' to highlight the figure - so I simply left it alone with its original "Citadel" Abaddon Black prime and "Vallejo" Heavy Charcoal dry-brush.

"Beast In The Broch" WIPs - A trio of FedSec Commanders

In addition to this first member of my "Star Trek: The Next Generation" landing party, I have also been dutifully progressing three more 'crewmen' for that era. Once completed this consignment should bring last month's randomly-selected drawer challenge to a conclusion and allow me to focus on the four remaining 28mm metal models I have to get tabletop ready from blister JD 15 Don Uggie Apelino & The Ape Gang by "Citadel Miniatures".  

Lastly, I've managed to make a little more headway on the three officers from the FedSec Command 2 set I recently bought from "Beast In The Broch". I do like the extra chunky feel to these particular sculpts, as it makes 'picking out' all the detail on them a lot easier than the arguably less-well cast "Star Trek" figures - which despite being 32mm in scale, appear far more realistically proportioned, and are resultantly far more difficult to work on...

(Lead) Mountain Musings - "Beast In The Broch" August 2026

"Crooked Dice Game Design Studio" once again dominated my (meagre) output for July 2026

After last month's rather dismissal effort to paint up another quartet of my 32mm scale resin cast figures by "Modiphius Entertainment" for their Star Trek Adventures Tabletop RPG, as well as zero contributions to Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog, I thought I'd take a break from challenges for the next four weeks and simply pigment whatever takes my fancy. As a result, I have ordered (and duly received) a number of "Blake's Seven" inspired sculpts from "Beast In The Broch" and plan to slap as much paint on them as I can muster.

First up will be the three officers from the company's FedSec Command 2 set. "Digitally sculpted by Carl Stoelzel and cast in lead free pewter", I actually feel that these particular figures are probably a little too 'chunky' for some of the range's other models. But that hasn't dampened my enthusiasm for getting the likes of Terran Federation officers Major Thania, Colonel Quute and Major Provine onto my tabletop.

"Beast In The Broch" WIPs - The three figures found inside FedSec Command 2 set.

Likewise it would be great if I could manage to get some of the miniatures finished from the manufacturer's Systemic Units set too. Clearly based upon "The System" which was responsible for building the Liberator, these figures arguably appear a little more slender to the eye than their Federation counter-parts - despite also being "digitally sculpted by Carl Stoelzel".

Furthermore, I'd really like to play 'catch-up' with the aforementioned "Star Trek" models I failed to get finished in July. I only managed to get one crew-woman from the science fiction franchise's Original Series done, so would like to make some headway with my plan to get a landing party based on the crew of the U.S.S. Enterprise-D too. Most of these miniatures' uniforms are predominantly black, so fingers crossed I can a few of them ready for varnishing over the coming weeks.

July 2026 - Crooked Dice Game Design Studio finally takes the lead in my Top Five Manufacturers

With this 'backlog' in mind, I haven't forgotten about the remaining figures I've yet to complete from blister JD 15 Don Uggie Apelino & The Ape Gang by "Citadel Miniatures". To be fair, I have been trying to 'pick away' at these classic sculpts for some time. However, I always seem to get distracted by my latest new arrivals (or interest), and subsequently end up pushing them back down the queue.

To make matters worse, my enthusiasm for "Star Wars" appears to have attained fresh heights as a result of my playing the card game "Star Wars: Unlimited" by Fantasy Flight Games. This addiction has rather curiously caused me to purchase a couple of "Star Wars: Shatterpoint" boxes - to add as non-canon adversaries of my previously painted Count Dooku. So I'd very much like to get them assembled, primed and pigmented before the coming month is concluded too...

"The Vulcan Science Directorate..."

"...Was the head scientific authority of the Vulcan High Command."

This 32mm scale resin model of a Vulcan Female was bought as part of the Star Trek Adventures: The Original Series Landing Party Miniatures Set by "Modiphius Entertainment" and is sadly no longer available as a physical figure. However, the sculpt can still be purchased from the company as either an individual STL (Standard Triangle Language) file, or as part of their Star Trek Adventures - Print At Home - TOS Landing Party Set.

The "warp-capable humanoid species from the planet Vulcan" was initially undercoated in "Vallejo" Heavy Skintone, and had her boots 'picked out' with a little pure "Citadel" Abaddon Black. I then attempted to give the impression of the Ensign wearing dark-coloured tights by applying a wash of "Citadel" Nuln Oil to her legs.

"Modiphius Entertainment" WIPs - This "Star Trek: Deep Space Nine" Ensign is almost finished

Unfortunately, this technique didn't seem to work as well on the Vulcan's much paler limbs as it had done on Lieutenant Uhura's far darker legs, so I soon decided to give the areas a second layer of "Citadel" Nuln Oil. In addition, I gave the figure's hands and face a lick of Reikland Fleshshade, before carefully tracing out the model's fingers and face with some extra "Vallejo" Heavy Skintone.

To show the miniature came from Starfleet's science division I gave her uniform a good coat or two of "Vallejo" Deep Sky Blue, shaded it with "Citadel" Drakenhof Nightshade and later dry-brushed the dress with (more) "Vallejo" Deep Sky Blue. To be honest I wasn't all that impressed with the final result of this colour combination. But didn't really want to repaint the Vulcan with a red miniskirt as I felt the highly logical alien race probably wouldn't be part of the U.S.S. Enterprise's security division.

"Crooked Dice Game Design Studio" WIPs - Two Beastmen and a Deep Sea Diver Ghost

Sticking with "Star Trek" and "Modiphius Entertainment" I have also been working on a female scientist from the company's Away Team boxed set. This resin cast model will be the first of my Twenty-Fourth Century Federation figures, and will hopefully lead to me fielding enough miniatures for Captain Jean-Luc Picard to lead against both the already painted Borg and Romulans.

Lastly, I've not forgotten the number of "Crooked Dice Game Design Studio" sculpts I have populating my hobby desk. As a result I have managed to 'pick away' at both the two remaining Beastmen I need to get finished, alongside their (not) "Scooby-Doo" Deep Sea Diver Ghost...

"Zoinks!" A Ghost!"

 "Hold your breath, and don't move a muscle!"

This 28mm scale white metal model is produced by “Crooked Dice Game Design Studio” and can be bought either separately as MINI 1336 Undead Astronaut, or as part of their DEAL 375 Spooks four-figure set. The miniature is sculpted by Andrew May and is clearly influenced by the villain from the 1969 "Scooby-Doo, Where Are You!" animated episode "Spooky Space Kook".

Able to leave "glowing footprints and fingerprints that dissipate after an undetermined time", the model was primed using "Vallejo" Steel Grey and heavily shaded with plenty of "Citadel" Nuln Oil. It was then enthusiastically dry-brushed using some (more) "Vallejo" Steel Grey, before having its elbow/knee joints, as well as its belt carefully 'picked out' with a little "Citadel" Abaddon Black.

"Modiphius Entertainment" WIPs - This Vulcan scientist is almost tabletop ready

The miniature was actually a bit more complicated than its cartoon counterpart, so I decided to apply a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil to its belt buckle and the tubing on its back-mounted breathing apparatus. I next tackled the ghostly apparition's infamous glowing skeletal face by dabbing a load of White Star by "Two Thin Coats" into its open space helmet and later giving the area a good dousing in some watered-down "Citadel" Flesh Tearers Red.

This approach certainly gave Henry Bascomb's disguise a nice, gory head, especially when I subsequently highlighted it with a little additional "Two Thin Coats" White Star rather than use the colour of the foiled criminal's space-suit as seen in the television show. Perhaps unsurprisingly, I thought this 'change' made the head look a bit too stark in comparison to the rest of the body, so I blended it in a bit with a touch of "Citadel" Carroburg Crimson.

"Modiphius Entertainment" WIPs - A trio of "The Next Generation" ensigns partially painted

Alongside my latest (not) Scooby-Doo villain I have been progressing a number of Federation crewmen by "Modiphius Entertainment". In particular a Vulcan scientist for my "Star Trek: The Original Series" Landing Team. I'm not sure whether the "Citadel" Nuln Oil over the female ensign's legs has particularly worked as black tights, as the technique did for Lieutenant Uhura's much browner legs, so I've actually applied a second shade on them to see if that sits better.

In addition, I've turned my eyes to working on an Away Team for the U.S.S. Enterprise-D's timeline, even discovering a Tellarite crewman amongst my previously assembled backlog. Hopefully, due to the lack of colour on their Starfleet uniforms, these miniatures will prove a lot faster to get tabletop ready, and help me successfully achieve my random drawer challenge for this month with a few days to spare...

"These Brutal Beasts May Be A Lost Underground Dwellers..."

"...Or come from a land before time." 

This 28mm scale white metal model is produced by “Crooked Dice Game Design Studio” and can be bought either separately as Beastman 3A, or as part of their DEAL 397 Beastman 3 four-figure set. Despite being by sculpted Ernst Veingart, I must admit to not being a big fan of this particular miniature as I dislike the patches of furry hair covering the savage's chest and forearms - something which arguably appears all the more bizarre-looking when looking at the 'official' light-skinned paint-job.

As a result I decided to undercoat mine with a couple of layers of "Vallejo" Heavy Sienna and splosh him with "Citadel" Agrax Earthshade. I then went back with some highlights of (more) "Vallejo" Heavy Sienna on the brute's facial features and fingers. This colour scheme definitely helped mask the aforementioned details I disliked without me having to resort to filing them off - which is something I did actually consider.

"Modiphius Entertainment" WIPs - A trio of Federation officers at various stages of completion

The Beastman's loincloth was pigmented with a combination of "Vallejo" Heavy Brown and "Citadel" Agrax Earthshade, before I 'picked out' the seemingly chain-linked belt threaded around the fellow's waist with a little "Vallejo" Gunmetal and "Citadel" Nuln Oil. As with the previous Beastman I've completed I did consider dry-brushing the animal fur with a bit more "Vallejo" Heavy Brown. However, as I wanted to use this model as cave-dwelling savage for "The Silver Bayonet" by "Osprey Games" (using the Cultist or maybe Ghoul rules), I felt he'd probably be extremely dirty, so left the piece of 'clothing' alone.

Finally, I used some "Citadel" Rakarth Flesh and Agrax Earthshade on the brute's brain-battering animal bone, dry-brushed the hand-weapon with a tad more Rakarth Flesh, and lastly added a smidgeon of "Vallejo" Dead White to it as a highlight. I also dropped a little "Vallejo" Gunmetal along the metal ring sticking out from the implement's bottom, and darkened it down with a splash of "Citadel" Nuln Oil.

"Death X Tiles" WIPs - These Starship Mini Set pieces have been shaded in "Citadel" Nuln Oil

With the second of my Beastmen finished I have moved on to the four "Star Trek" miniatures by "Modiphius Entertainment" I am aiming to get tabletop ready before the month is out. Admittedly, most of these crewmen have simply been 'dusted down' rather than been assembled from cast resin sprues. But I do aim to have a nice mixture of officers from both The Original Series (TOS), and "Star Trek: Deep Space Nine" ready for action over the next few weeks.

Furthermore, I'm still very keen to contribute to Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog by polishing off some of the many terrain pieces I have produced in "Bambu Lab" PLA (Polylactic Acid) on my A1 Mini 3D Printer. To be honest, this is probably going to be something of a slow approach as I'm not a fan of painting terrain at the best of times. However, I have managed to get some basic "Citadel" Nuln Oil washes on a trio of Starship Mini Set pieces by "Death X Tiles"...

"Wubba Lubba Dub-Dub!"

"Nobody exists on purpose, nobody belongs anywhere, everybody's gonna die."

This 28mm scale white metal model of Rick Sanchez is sort of produced by “Crooked Dice Game Design Studio” as it's actually composed of bitz from a couple of their miniatures and an alternate weapon sprue. The torso and legs are from the company's MINI 341 Investigative Academic, with its head sawn off and replaced with that of their Crackpot Inventor. I did actually consider just using the entire Crackpot Inventor for a while, but felt that all the scientific gubbins detailed on the sculpt wasn't really in line with Rick C-137's look in the cartoon series "Rick And Morty".

In addition, I snipped off the Investigative Academic's left hand and swapped it for one of the manufacturer's Robo-Minion weapon accessories. This particular piece did have a mechanical hand, rather than one made of flesh and blood. However, I figured I could simply paint it using my usual combination of "Vallejo" Heavy Skintone and "Citadel" Reikland Fleshshade, and everything would be fine to the naked eye. I did momentarily plan on adding a little portal fluid 'cup' to top of the device. However, the area upon which I'd need to super-glue/pin such a tiny detail was a little to small for my liking, so I simply settled on pigmenting part of the hand-weapon using "Two Thin Coats" White Star and the "Citadel" Contrast Colour Warp Lightning.

"Crooked Dice Game Design Studio" WIPs - These three Beastmen are having all their details 'picked out'

Once assembled the entire kit-bash was primed with "Vallejo" Dead White, shaded using some heavily-watered down "Vallejo" Heavy Bluegrey, and dry-brushed with a little White Star by "Two Thin Coats". Sadly, I wasn't at all impressed with how this turned out - probably due to the heat drying my paints the moment they touched the figure, so I ended up washing the model with (more) incredibly-watered down "Vallejo" Heavy Bluegrey, and the giving Rick a very patient dry-brush of (more) "Two Thin Coats" White Star.

The mega-genius' shirt was simply 'picked out with a little "Vallejo" Deep Sky Blue and a splash of "Citadel" Drakenhof Nightshade. This turned out far darker than I had envisaged. But meant that the Investigative Academic's neck scarf was somewhat obscured by the shadows. Lastly, I carefully gave the alcoholic scientist's eyebrows a line of "Vallejo" Heavy Bluegrey and daubed his hair with the same colour. Both of these areas were subsequently darkened down with some "Citadel" Nuln Oil.

"Modiphius Entertainment" WIPs - Two 'TNG' Starship crewmen and a 'TOS' member of the Landing Party

With my entry for Jez's "Forgotten Heroes" event over on his "Carrion Crow's Buffet" blog finally finished, I have been busy continuing to work on the three remaining Beastmen I started progressing in earnest a few months ago. I plan to use these "Crooked Dice Game Design Studio" figures as Cultists or Ghouls for my games of "The Silver Bayonet" by "Osprey Publishing", so want to get them tabletop ready 'toot sweet' now the weather has warmed up to the point where I can set up some scenarios in the garage.

Furthermore, it looks like next month's random drawer challenge will comprise of more "Star Trek" miniatures by "Modiphius Entertainment", so I have dutifully dusted down and (already) got going on three crewmen. The eagle-eyed Trekkies will quickly spot that two of my current batch are wearing 24th Century uniforms rather than those of The Original Series (TOS), and that's so I can hopefully field a "Next Generation" or "Deep Space Nine" flavoured landing party at some point in the future...

"And You Saw A Shadowy, Chain-Rattling Phantom?"

"If he's a phantom shadow, how come he leaves footprints?"

This 28mm scale white metal model is produced by “Crooked Dice Game Design Studio” and can be bought either separately as MINI 1338 Sheet Ghost, or as part of their DEAL 376 Ghosts two-figure set. The miniature is sculpted by Andrew May and clearly inspired by the Phantom Shadow as seen in the January 1970 animated "Scooby-Doo, Where Are You!" episode, "A Night of Fright is No Delight".

Used as a disguise the "two no-good greedy lawyers named Cosgood Creeps and Cuthbert Crawls", I actually attempted to pigment my spectre using the colours seen in the cartoon series rather than the 'official' paint-job, so ended up applying a double dose of "Vallejo" Turquoise to the entire model. It was then dowsed in "Citadel" Nuln Oil before being dry-brushed with more "Vallejo" Turquoise so as to highlight all the folds in its sheets.

"Modiphius Entertainment" WIPs - This Vulcan scientist is having her base layers applied

The miniature's chain was simply 'picked out' using a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil over an Abaddon Black basecoat. Whilst its eyes and maw were carefully traced using some Rust Orange by "Two Thin Coats". I actually felt that this colour lacked the life I wanted for such a terrifying face, so ended up shading these areas with a smidgeon of "Citadel" Reikland Fleshshade. I also took this opportunity to slightly deviate away from the broadcast version of the Phantom Shadow by giving its hands a lick op "Citadel" Abaddon Black - rather than leave them to 'merge in' with the rest of its body.

I'm actually now tempted to purchase a second one of these sculpts as there were actually two of the ghouls running around Colonel Beauregard Sanders' mansion, so I've added one to my Wish List for the next time I see "Crooked Dice Game Design Studio" at a wargaming show. However, I am a bit loathe to buy a second identical pose. I did consider getting the figure as an STL (Standard Triangle Language) file from the company's collection on "My Mini Factory" and mirroring it - so it'd appear a little different. But sadly the Sheet Ghost doesn't seem to have been uploaded to the 3D printable object-sharing platform yet.

"Crooked Dice Game Design Studio" WIPs - Various models at various stages of completion

In addition to my latest Scooby Doo villain, I have been busy assembling another member of the Away Team I put together a couple of months ago. I was planning to use the models for some games of "Lost Patrol" by "Games Workshop" and realised that I'd need five Federation crewmen to "locate a crashed dropship in a hostile, sentient jungle" rather than the four I currently own. To shake things up a bit though I thought I'd assemble one of the 32mm scale resin Vulcan females I bought as part of the Star Trek Adventures: The Original Series Landing Party Miniatures Set by "Modiphius Entertainment", and may well make her a 'Red Shirt' rather than the usual Science Officer.

Finally, I've been busy trying to sate my current appetite for more models produced by "Crooked Dice Game Design Studio". This includes the remaining Beastmen I have yet to complete, as well as the rest of their "Scooby-Doo" inspired ghosts, ghouls and villains. Furthermore, with just a few days left until the end of Jez's "Forgotten Heroes" event over on his "Carrion Crow's Buffet" blog, I am going full-pelt on my kit-bashed Rick Sanchez figure...

"Andorians, Yes."

"I've been reading about them in the Vulcan database."

This 32mm scale resin model of an Andorian Male was bought as part of the Star Trek Adventures: The Original Series Landing Party Miniatures Set by "Modiphius Entertainment" and is sadly no longer available as a physical figure. However, the sculpt can still be purchased from the company as either an individual STL (Standard Triangle Language) file, or as part of their Star Trek Adventures - Print At Home - TOS Landing Party Set.

The lower half of the "militaristic, blue-skinned" Ensign was originally primed using some "Citadel" Abaddon Black. However, the Base Colour simply wouldn't stick to the miniature for some bizarre reason - even after a few coats, so in the end the model was treated to a layer of "Vallejo" Heavy Red, which proved much more 'adhesive'. Only then did I pick out the alien's boots and trousers in (more) "Citadel" Abaddon Black.

"Citadel Miniatures" WIPs - Joe Bananas, Don Uggie Apelino and Fast Eeek

The Federation's famous chest insignia was carefully pigmented using some "Vallejo" Gold and a smidgeon of "Citadel" Agrax Earthshade. Whilst the Andorian's Type-2 hand phaser was given a lick of "Vallejo" Gunmetal and subsequently shaded with a splash of "Citadel" Nuln Oil. As a final touch I gave the model's flesh a coat of "Vallejo" Deep Sky Blue and shaded it down with "Citadel" Drakenhof Nightshade.

To be honest this turned out a little darker than I had envisaged so I highlighted the facial details and fingers with (more) "Vallejo" Deep Sky Blue. I also applied some "Two Thin Coats" White Star to the figure's hair, and subsequently darkened it down with some "Citadel" Nuln Oil. I did consider dry-brushing this area with a tad more White Star by "Two Thin Coats". But in the end thought it looked good as it was.

"Wizkids" WIPs - This Banderhobb has essentially been repainted from scratch after six years

Having completed an extra model from last month's randomly rolled challenge, I thought I'd better get cracking on the motley crew I've based for May. I've actually got five of these classic "Citadel Miniatures" from 1985 on my painting table, and decided to undercoat Don Uggie & The Ape Gang all at the same time. I did look at some of their colour schemes from within the pages of the science fiction anthology comic book "2000 A.D." too. However, as the apes' suits seemed to change depending on the colourist, I decided to simply go with some schemes which I thought would help make them stand out on my "Judge Dredd" tabletop.

Furthermore, as I'm taking part in the "Monster May(hem)" monthly challenge over on "Dead Dick's Tavern and Temporary Lodging" blog, I thought I'd better get cracking on an old Banderhobb I've had sat partially-painted in my hobby area for the past six years. As memory serves I gave up on this particular "large, Neutral Evil monstrosity" by "Wizkids" because I was struggling with doing his belly right, so this time round I have simplified what I what to do with the miniature and plan to focus on giving him lots of boils...

(Lead) Mountain Musings - Monster May(hem) 2026

"Modiphius Entertainment" surprisingly made a big return throughout April 2026

Despite managing to complete my personal randomly drawn drawer challenge last month, my overall output was still a bit lower than what I had both expected or hoped. As a result I thought I'd accept Angry Piper's invitation to join his annual "Monster May(hem)" monthly challenge over on the "Dead Dick's Tavern and Temporary Lodging" blog, and finally finish a few of the larger models I have had just sat on one side away from my painting area for the past few years.

In addition, I thought I'd do a second drawer challenge, and this time initially appeared to be knee deep in old "Judge Dredd Miniatures Game: Block War" models from the rather controversial 2012 "Mongoose Publishing" Kickstarter - fourteen years has still not calmed my fury over this campaign. However, I also spied a plastic bag containing the classic 28mm metal figures Don Uggie Apelino and his Ape Gang by "Citadel Miniatures".

"Step into a cataclysmic struggle that will decide the fate of humanity’s soul…"

Admittedly these particular "rare, vintage" sculpts date back even further in time than my aforementioned collection of Matthew Sprange miniatures, all the way back to 1985 when Bryan Ansell's company released them in a blister as part of their "2000 A.D." Judge Dredd range . However not only should the set still fit in size-wise with my current painted Judge Dredd collection, but I seem to somehow own three copies of Fast Eeek. So 'he' will provide Don Uggie with some much needed multiple minions, along with the larger 'muscle' of Joe Bananas.

Furthermore, I have completed a third 32mm scale Bomb Coffin by "Trench Stench". As with the first couple of Sarcophagus Mines I recently completed, this model was downloaded for free as part of their three-figure set of STL (Standard Triangle Language) files from the company's "Patreon" subscription service; albeit having read the "Warbands of Trench Crusade" rulebook a force of Heretic Troopers is limited to only two such 'upgrades'.

April 2026 - No change at the top after a rather lack-lustre month's productivity

Forming part of their Ghosts of the Nomansland range for the "tabletop skirmish wargame that pits the forces of Mankind against the fiends of Hell", and produced using "Elegoo" Water Washable Resin on my Mars 5 3D Printer, the miniature was predominantly pigmented using "Vallejo" Bronze and "Citadel" Agrax Earthshade over a "Vallejo" Heavy Sienna undercoat. Although I did I use White Star by "Two Thin Coats" and "Citadel" Biel-Tan Green for the sculpt's spooky spectral flames.

Whilst the last four weeks wasn't the worst April I've recorded, it wasn't anywhere near as productive as I thought I was going to be, so I'm hoping that a plethora of big, scary monsters will help shake off this 'hobby funk' and see me rattle off a fair few miniatures. In particular I want to get at least another tiny unit of Napoleonic French by "Wargames Foundry" completed, as well as successfully make a start on the American Civil War models by "Perry Miniatures" I managed to assemble and prime last month. Plus, there's a big collection of unpainted scenery pieces currently loitering my hobby desk which need polishing off before they can be used for some actual games...

"Captain, I See Something."

"Kelowitz, Lang, flank out. Lay down fire on co-ordinates Mister Spock gave you."

This 32mm scale resin model of a Human Male was bought as part of the Star Trek Adventures: The Original Series Landing Party Miniatures Set by "Modiphius Entertainment" and is sadly no longer available as a physical figure. However, the sculpt can still be purchased from the company as either an individual STL (Standard Triangle Language) file, or as part of their Star Trek Adventures - Print At Home - TOS Landing Party Set.

The Ensign was actually primed using a combination of "Citadel" Abaddon Black and "Vallejo" Heavy Red. This was because I thought it would be easier to just base-layer the two distinct halves of the figure in its predominant colours. However, the "Citadel" Abaddon Black simply wouldn't stick to the miniature for some bizarre reason - even after a few coats, so in the end the model was given a complete lick of "Vallejo" Heavy Red, and then had his boots/trousers pigmented in (more) "Citadel" Abaddon Black.

"Modiphius Entertainment" WIPs - This Andorian Ensign is almost finished

The human's famous chest insignia was carefully 'picked out' using some "Vallejo" Gold and a smidgeon of "Citadel" Agrax Earthshade. Whilst his Type-2 hand phaser was given a lick of "Vallejo" Gunmetal and subsequently shaded with a splosh or two of "Citadel" Nuln Oil. Finally, as I wanted the model to represent O'Herlihy from the January 1967 televised episode "Arena", I applied some (additional) "Citadel" Abaddon Black to the miniature's hair.

Despite having completed my randomly rolled four-figure challenge for this month, I thought I might as well finish working on another of the "Star Trek" resin sprues found inside the drawer, so have been patiently working my way up an Andorian ensign too. Admittedly, there weren't any of the "warp-capable humanoid species from the moon Andoria" shown as being part of the U.S.S. Enterprise's crew in the Original Television Series. But I like to think that there some work aboard her in the background.

"Diehard Miniatures" WIPs - These three Krupps Corp troopers have been primed in "Vallejo" German Grey

Lastly, I have managed to base and prime three of the models found inside the Krupps Corp unit blister I was lucky enough to buy at Salute 2026. This "explorer faction that have a long standing rivalry with the E-Corp agents" immediately captured my imagination as they are clearly inspired by the Norts from the "Rogue Trooper" comic book series in "2000 A.D.", and resultantly caused me to start planning a future battlefield based upon Nu Earth.

For now though I just want to get a small squad of these "Diehard Miniatures" sculpts painted, and then take it from there. I do believe I have some Genetic Infantrymen by "Mongoose Publishing" somewhere, and possibly some of the E-Corp agents mentioned in the Krupps Corp troopers' blurb. But with my long-term Napoleonic and American Civil War projects still on the go, I don't really want to leap into another genre with both feet...

"The Trial Never Ends."

"I'm extraordinarily selfish. But it has served me so well in the past."

This 32mm scale resin model of Q was bought as part of the Star Trek Adventures Iconic Villains Miniatures Set by "Modiphius Entertainment" and is sadly no longer available as a physical figure. However, the sculpt, featuring an excellent likeness of actor John de Lancie, can still be purchased from the company as an STL (Standard Triangle Language) file from their Print At Home range.

The "extra-dimensional being of unknown origin" was originally undercoated in "Vallejo" Heavy Red, drenched with "Citadel" Carroburg Crimson and then heavily dry-brushed with (more) "Vallejo" Heavy Red. His shirt and robe's sleeves were then carefully 'picked out' with "Citadel" Abaddon Black, before I used a combination of "Vallejo" Gold and "Citadel" Agrax Earthshade on his ornate neck-chain.

"Modiphius Entertainment" - These two Red Shirts have been assembled, primed and base-layered

I next pigmented the so-called judge's gloves with some additional "Vallejo" Heavy Red too. But later felt this made them blend in with the rest of Q's attire. As a result I went in and applied some "Vallejo" Heavy Red and "Citadel" Carroburg Crimson to just the inside of the super-being's sleeves, and subsequently used a little trusty "Vallejo" Dark Vermillion on his gloves. This area was shaded with "Citadel" Carroburg Crimson, before I carefully lined the upper fingers with a tad more "Vallejo" Dark Vermillion.

With the enigmatic Q completed I was planning on finishing off the range's Sulu figure. However, I quickly realised that I had either misplaced or run out of "Vallejo" Heavy Ochre - which I had previously used on the figure's shirt. As a result I simply grabbed a couple of sprues from the Star Trek Adventures Iconic Landing Party Set by "Modiphius Entertainment" I own, and assembled a pair of ultimately doomed Red Shirts.

"Wargames Foundry" WIPs - It's early days yet on these four Napoleonic French Carabiniers

This actually proved a little bit more difficult than I planned as the resin cast miniatures were multi-part and didn't seem to take to super-glue very well at all. In the end I had to use a little ball of green-stuff to hold the limbs in place whilst the adhesive dried, and so by the time my Human and Andorian were ready to be painted, my order of "Vallejo" Heavy Ochre off of "eBay" had also arrived.

In addition to feeding my current "Star Trek" fix, I have based, primed and begun putting a rough base layer on a quartet of Napoleonic Frenchmen from blister FN062 - Light Infantry Carabiniers In Campaign Dress And Colpacks Marching by "Wargames Foundry". Like a fool I actually thought from just looking at them from the front that these would be quite simple (and therefore quick) to get tabletop ready. However, the sheer amount of detail sculpted onto their rears is flabberghasting, and will doubtless cause me a few headache-filled hobby sessions trying to work out what colour each piece of kit is...

"Enterprise Is Cleared For Launch."

"Hailing frequencies open, sir."

This 32mm scale resin model of Lieutenant Uhura was bought as part of the Star Trek Adventures Original Series Miniatures Set by "Modiphius Entertainment" and is sadly no longer available as a physical figure. However, the sculpt, featuring an excellent likeness of actress Nichelle Nichols, can still be purchased from the company as an STL (Standard Triangle Language) file from their Print At Home range.

The Bridge Officer was initially primed using a layer or two of "Vallejo" Heavy Red before having her uniform shaded in "Citadel" Carroburg Crimson. This clothing was then dry-brushed with (more) "Vallejo" Heavy Red, before it's iconic insignia and Nyota's rank wrist stripes were carefully 'picked out' using a little "Vallejo" Gold and "Citadel" Agrax Earthshade.

"This is not merely a fight for survival."

I next painted Uhura's boots and hair with pure "Citadel" Abaddon Black, and applied some "Vallejo" Heavy Sienna to her legs, hands and face. As I wanted to suggest that the linguistics specialist was wearing tights, I gave her legs a wash of "Citadel" Nuln Oil, whilst the rest of the woman's flesh was treated to some Agrax Earthshade. Finally, I dotted Nyota's earpiece and Type-2 hand phaser with "Vallejo" Gunmetal and darkened the devices down with a splash of "Citadel" Nuln Oil.

In addition to Lieutenant Uhura I have also completed a second 32mm scale Bomb Coffin by "Trench Stench". As with the first Sarcophagus Mine I recently completed, this model was downloaded for free as part of their three-figure set of STL (Standard Triangle Language) files from the company's "Patreon" subscription service.

"Perry Miniatures" WIPs - These four confederate soldiers have had all their different areas 'boxed'

Forming part of their Ghosts of the Nomansland range for "Trench Crusade", and produced using "Elegoo" Water Washable Resin on my Mars 5 3D Printer, the miniature was predominantly pigmented using "Vallejo" Bronze and "Citadel" Agrax Earthshade over a "Vallejo" Heavy Sienna undercoat. In addition I used White Star by "Two Thin Coats" and "Citadel" Biel-Tan Green for the sculpt's spooky spectral flames.

Despite all these 'distractions', I haven't forgotten about the first four Confederate soldiers from my recently acquired the American Civil War - Battle in a Box starter set either, and have managed to spend a little time on the "Perry Miniatures" 'boxing off' all their different coloured areas. This process has certainly made me rethink my technique for future American Civil War combatants - as they're all going to be primed in "Citadel" Abaddon Black from now on...

"I Will Not Be President Of A Ruined Empire!"

"There are no women like me. I am unique."

This 28mm scale piece of scenery is comprised of the Desert Shrine Scatter Terrain by "CobraMode" and the 1:21 scale resin miniature of The Leader by "Totters Yard Customs". The sanctum was created using some "Bambu Lab" PLA (Polylactic Acid) on my A1 Mini 3D Printer, whilst the 'statue' was very kindly gifted to me by its manufacturer to use on this project due to it failing their rigorous quality control standards - Not that I could see anything wrong with it myself.

Having been super-glued on a 120mm x 90mm oval MDF base by "Warbases", the altar was primed using plenty of "Vallejo" Heavy Bluegrey, shaded with "Citadel" Nuln Oil, and dry-brushed with (more) "Vallejo" Heavy Bluegrey to help bring out all the sculpt's marvellous details. I then set to work aging the piece by 'picking out' all of the dirt which had accumulated around it with a combination of "Citadel" Doombull Brown, Rakarth Flesh and Agrax Earthshade. I also added a bit more colour to the piece by applying some "Vallejo" Gold and "Citadel" Agrax Earthshade to the two bowls located near the central plinth.

"Modiphius Entertainment" WIPs - Q, Sulu and Uhura

In order to make the statue appear a bit battered by the ages, I decided to initially give it a couple of licks of "Vallejo" Bronze, shade it with "Agrax Earthshade", and highlight it back up with a patient dry-brush of (more) "Vallejo" Bronze. I next carefully applied some streaks of the "Citadel" Technical Paint Nihilakh Oxide to its numerous folds, and later blended these areas in with (even more) "Vallejo" Bronze.

Finally the model and its stand were drilled, and pinned together using a little (too much) super-glue, green-stuff and an old drill bit. Obviously the more eagle-eyed will doubtless guess that this piece of scenery is destined for my "Blake's 7" tabletop as part of the President's Garden on Earth - where doubtless in the near future the likes of Roj Blake, Avon, Jenna and Vila will encounter Servalan, Space Commander Travis and a whole host of Federation troopers.

"Perry Miniatures" WIPs - Four Confederate soldiers assembled and primed

Sticking with Science Fiction I have also managed to get a little work done on three "Star Trek" miniatures by "Modiphius Entertainment" as part of my monthly random drawer challenge. I'd actually already started pigmenting this trio a few years ago, so I am hoping the likes of Uhura, Sulu and the ever enigmatic Q won't actually take all that long to complete.

Furthermore, I've taken a bit of a plunge by picking up the American Civil War - Battle in a Box starter set by "Perry Miniatures", and assembled four of its Confederate soldiers. This purchase was almost solely influenced by a recent rewatching of the 2020 American television miniseries "Grant", and will almost certainly be something of a slow-burn project over the coming months...

"Personal Guard Fully Activated."

"We will take the bridge at once. Continue the reactivation."

These three 28mm scale Cybermen were sculpted by "Big Mr Tong" and can be downloaded for free as part of a ten-figure set of STL (Standard Triangle Language) files from his "Patreon" subscription service. Based upon Eric Saward's incarnation of the Mondasians as first seen in his March 1982 "Doctor Who" story "Earthshock", the miniatures were produced using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer.

Having been washed, cured and then removed from their supports (applied through "Chitubox" Basic), the trio were primed in "Citadel" Abaddon Black and given a couple of coats of "Vallejo" Gunmetal. The models were then shaded using "Citadel" Nuln Oil, and dry-brushed with (more) "Vallejo" Gunmetal, before I applied a combination of "Scalecolor" Speed Metal and "Citadel" Flesh Tearers Red to the visible power cylinders on each of their hand-weapons.

"At Isstvan V, Horus dealt a vicious blow and three loyal Legions were all but destroyed."

Alongside the cyborg invaders of Captain Briggs' space freighter, I have also finished painting another 28mm plastic Space Marine by "Games Workshop" for my five-hundred-point Sons of Horus traitor force. This multi-part figure comes from the recently released Warhammer: The Horus Heresy – Age of Darkness boxed set and is wearing MK VI armour.

The miniature was undercoated using "Citadel" Sons Of Horus Green, washed with Nuln Oil, and dry-brushed with (more) Sons Of Horus Green. I also applied some "Citadel" Abaddon Black to one of his shoulder-pads (by mistake), as well as his grenades, Bolter, backpack, wiring, and some of the areas in between his "iconic armour".

"Lost Heresy Miniatures" WIPs - An Away Team Red crewmember, First Officer Lenoy and Captain Tiberius

The model's power tubes, wiring and firearm were later treated to a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil. I then applied a coat of "Vallejo" Heavy Sienna to the space marine's stud-covered shoulder-pad, before applying some "Vallejo" Gold and a splash of "Citadel" Agrax Earthshade to it. The rivets (or bobbles) and its edges were later highlighted with some additional touches of "Vallejo" Gold.

Finally, I have settled down to working my way through a handful of "Star Trek" flavoured resin prints by "Lost Heresy Miniatures". As part of my Patreon's subscription Sci-Fi Welcome pack I was lucky enough to be sent a sample of Bill Thornhill's Away Team Red figures and scoop up Captain Tiberius' alternative command uniform off of "MyMiniFactory"...

"Schmitter. Like The Rest Of Them. Burned To A Crisp."

"I only got a glimpse of it, but it's big and shaggy."

This 28mm scale Lava Creature is sold by "Lost Heresy Miniatures" and can be downloaded as an STL (Standard Triangle Language) file from "MyMiniFactory" along with some round-shaped eggs. Sculpted by Bill Thornhill, the figure is strongly influenced by the Horta from Gene L. Coon's 1967 "Star Trek" television story "The Devil In The Dark" and was produced using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer.

"A sentient non-humanoid silicon cycle life form native to the planet Janus VI", the model was primed using a double helping of "Vallejo" Heavy Sienna and then sporadically splodged with "Citadel" Doombull Brown whilst its undercoat was still wet. The alien was then thoroughly drenched in "Citadel" Agrax Earthshade and had its lava-like ridges carefully 'picked out' in "Vallejo" White.

"Battlefront Miniatures" WIPs - Three 15mm plastic 'D-Day' German Panzergrenadiers

These areas were subsequently treated to a layer of "Vallejo" Sun Yellow and later, Heavy Orange, before being shaded in both "Citadel" Carroburg Crimson and Agrax Earthshade. Finally, the mother Horta's ridges were daubed in (more) "Vallejo" Heavy Orange with a badly battered brush-tip and darkened down thanks to some additional "Citadel" Carroburg Crimson.

To be honest this model was a bit of a monster to print, as despite its STL file coming pre-supported, I didn't think the weak-looking struts would allow the miniature to survive the process and would 'tear away' from the build plate onto the FEP (i.e. the bottom of the resin tank). As a result, I initially placed an unsupported version of the creature directly onto the build plate and then watched the solid(ish) sculpt then shatter into a handful of pieces post-print when I tried to remove it with a metal scrapper. The second time round I used Bill's pre-supports, and despite my reservations (as I've had more "Lost Heresy Miniatures" fail than any other manufacturer) the figure printed out perfectly.

"Big Mr. Tong" WIPs - A Sardaukar trooper, Shaggy Rogers and Scooby Doo

With the first of what will probably be a long line of "Star Trek" inspired 3D prints painted, I have made some more inroads into my 50-point German Beach Defence Company for "Flames Of War" and am now just four 15mm plastic infantrymen away from completing my second German Panzergrenadier Platoon. Once these are finished, I can eagerly move on to the 7.5cm Tank-Hunter Platoon and Panzer IV Tanks I need to successfully fill out my sizeable force.

Lastly, I've been busy printing a seemingly endless number of 28mm scale figures taken from the formidably extensive range of models produced by "Big Mr. Tong" for his Patreon subscribers. Foremost of these are Shaggy Rogers and Scooby Doo from Mystery Inc. However, I have also started in earnest my plans for some bizarre battles between numerous science fiction film/television franchises by preparing a test Sardaukar trooper, which has clearly been inspired by the emperor's elite warriors depicted in David Lynch's 1984 movie "Dune"...

"A Yeti!"

"Oh, Doctor, Doctor, the Yeti. Have they gone?"

This metal Yeti is manufactured by “Warlord Games” and can be found inside the Nottingham-based company's "special limited-time offer" Doctor Who: Web Of Fear set. In total, the blister contains three models of the Great Intelligence's furry robots, alongside a kneeling figure of Colonel Lethbridge-Stewart and defiant-looking Professor Travers. Provided for free with any orders of £75 or more, the five-figure collection is based upon Mervyn Haisman and Henry Lincoln's February 1968 televised story "The Web Of Fear".  

The miniature was initially undercoated with "Vallejo" Heavy Sienna and 'drowned' using a combination of "Citadel" Agrax Earthshade and "The Army Painter" Strong Tone Quickshade. It was then dry-brushed with (more) "Vallejo" Heavy Sienna, and later treated to a light dusting of "Vallejo" Heavy Brown. Lastly, the furry monster's eyes were picked out with "Vallejo" White, Sun Yellow, "Citadel" Reikland Fleshshade and an additional highlight of "Vallejo" Sun Yellow.

"Germany’s armed forces had carved out a home for themselves in France."

Alongside my third Movember inspired model, I have completed another stand of four 15mm plastic infantrymen to bolster my German Beach Defence Company for "Flames Of War". These models can be found inside the “Hit The Beach” starter set by “Battlefront Miniatures” and were all initially super-glued onto wooden strips, before being primed in “Vallejo” German Fieldgrey WWII.

Each soldier was subsequently shaded using “Citadel” Nuln Oil, and dry-brushed with (more) “Vallejo” German Fieldgrey WWII. Their details were then ‘picked out’ predominantly using “Vallejo” Heavy Sienna, Gunmetal, Buff, German Camouflage Dark Green, Heavy Brown and a series of “Citadel” Shades. Furthermore, the Panzergrenadiers' rifle tops, the general-purpose machine gun, and water flask stoppers were given a combination of “Vallejo” Gunmetal and “Citadel” Nuln Oil.

"Lost Heresy Miniatures" WIPs - Captain Tiberius, First Officer Lenoy and a Lava Creature

Lastly, I have been slowly working on some of the first models I received from "Lost Heresy Miniatures" after I subscribed to the creator's Patreon service. These 3D printed figures are clearly heavily influenced by the original Sixties science fiction television series "Star Trek", in particular the March 1967 episode - "The Devil In The Dark", and initially promised to be a much cheaper alternative to the rather expensive 'official' range of 32mm scale Starfleet crewmembers sold by "Modiphius Entertainment".

Unfortunately, I have found the sculpts to be a bit variable in size alongside one another (something that will become much clearer as I continue to paint my way through the numerous releases), and also relatively difficult to successfully print out on my Mars 3 Pro. Indeed, Captain Tiberius is sporting a plastic hand, taken from a "Warlord Games" 8th Army (Desert Rats) frame, following my machine's failure to produce all his fingers intact...