(Lead) Mountain Musings - "Modiphius Entertainment" July 2026

"Crooked Dice Game Design Studio" dominated my miniatures for June 2026

With both a successful "Forgotten Heroes" event and random drawer challenge under my belt from last month, I thought I'd roll a D12 to see which plastic drawer I'd select a handful of miniatures from for July, and rather surprisingly discovered I'd be painting more of my 32mm scale resin cast Star Trek Adventures Tabletop RPG figures produced by "Modiphius Entertainment". This selection actually comes at a rather opportune time as I was planning to use the miniatures I'd previously pigmented for some games of "Lost Patrol" by "Games Workshop", and only recently realised I was the odd sculpt short of what I needed to field a legitimate landing party.

In addition, having got the enigmatic 'Q' tabletop ready in the past, I thought I should also focus on getting some of the next generation of Federation officers completed as well - quite possibly with the notion of pitting Captain Kirk's crew against that of Jean-Luc Picard's at some future point. Such a move might also make it far easier (and quicker) to get the figures finished as most appear to be wearing the predominantly black colour scheme seen during the Star Trek: The Next Generation movies.

"Death X Tiles" WIPs - Three of nine tiles earmarked for a science fiction boarding zone

Furthermore, for the next three months I thought I'd contribute to Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog by polishing off some of the backlog of terrain pieces I have been religiously producing in "Bambu Lab" PLA (Polylactic Acid) on my A1 Mini 3D Printer. For this opening month I felt I should try to see how much of the Starship Mini Set by "Death X Tiles" I could get done, seeing as I've finally settled upon a simple "Vallejo" Heavy Bluegrey palette for most of the pieces.

To begin with my aim is simply to get a boarding zone completed, which will consist of a 3x3 tile room with a single, open doorway. However, if I can manage to get this quite sizeable area completed within the space of four weeks or less, then I may well start to focus on one of the five much larger rooms I intend my science fiction figures to battle over in future fights. I also have a ton of "Trench Crusade" flavoured scenery by "Saucermen Studios" to crack on with, so may well take a break from the tiles with the odd barricade or bunker.

June 2026 - My Top Five Table has in reality become a rather surprising Top Eight contest

Last month's meagre output certainly saw some surprising congestion strike my most popular manufacturers, with my need to paint at least four models by "Crooked Dice Game Design Studio" helping them to top position - alongside "Wargames Foundry". On top of that my desire to finish off the squad of second-hand Wookie Warriors I rather impulsively purchased whilst in Poole helped the popularity of "Fantasy Flight Games" rival some of my more usual Top Five contenders.

Fortunately, I feel the next four or so weeks will help ease this bottleneck as I'm sure quite a few more miniatures by both "Crooked Dice Game Design Studio" and "Modiphius Entertainment" will be on the cards. What's more I'm really hoping to get going again on a few long paused projects which have simply been sat gathering dust on my hobby table for the best part of the year, such as my "Wargames Foundry" Napoleonics for "Black Powder" and some more "Trench Crusade" warriors by "Trench Stench"...

(Lead) Mountain Musings - Forgotten Heroes June 2026

A trio of "Titan Forge" Death Dogs were completed for "Monster (Mayhem)"

Having at least managed a far better May than I have during the past couple of years, thanks largely to my participation in Angry Piper's "Monster May(hem)" monthly challenge over on his "Dead Dick's Tavern and Temporary Lodging" blog, I thought I'd dedicate some of this month's hobby time to visiting "Carrion Crow's Buffet" and helping Jez celebrate the Tenth Anniversary of "Forgotten Heroes" event. This is an annual affair I really enjoyed being involved in during its formative days, and resulted in the creation of many of my Howling Commandos of S.H.I.E.L.D. predominantly using various "Wizkids" plastic pieces from their numerous "Heroclix" lines. 

In recent years though, I've not been quite so inspired to cobble a figure together using bits and pieces from various manufacturers due to what I want being available as STL (Standard Triangle Language) files, and so my interest (as well as my participation) has disappointingly waned. This time however, I thought I should go back to its roots, hack up a metal figure or two, and pin an ensemble together.

"Crooked Dice Game Design Studio" WIPs - This 'Rick Sanchez' has been kit-bashed from a couple of figures

Fortunately, I already had just the very model in my collection, having chopped up the body of a Investigative Academic by "Crooked Dice Game Design Studio", stuck the company's Crackpot Inventor head on its shoulders, and added a Robo-Minion weapon accessory to use as a portal gun. This gave me a rather agreeable looking Rick Sanchez from the animated science fiction comedy franchise "Rick And Morty", and a solid start for "Forgotten Heroes" too.

Furthermore, I also thought I'd do a third drawer challenge for this month, even though I still had plenty to do on the "Citadel Miniatures" blister Don Uggie And His Ape Gang from May. Somewhat coincidentally, my random roll picked a drawer absolutely packed full of more of Karl Perrotton's figures, so I'm reasonably confident I should be able to both complete the gangsters I didn't finish last time, as well as polish off a fair few more miniatures from "Crooked Dice Game Design Studio" as well.

May 2026 - "Modiphius Entertainment" finally enters the Top Five

The past four weeks certainly saw an odd mix of subjects being pigmented, with a couple of blasts from the past being treated to a lick of my brush simply because they brought back some nostalgic memories. Of particular note for this were the two Wookie Warriors by "Fantasy Flight Games" I got tabletop ready having purchased them on the spur of the moment second-hand. Now admittedly I don't have any current plans to play "Star Wars: Legion" any time soon. But I may well polish off the two remaining fur-covered rebels in the near future simply for completion's sake.

Indeed, this month may well see me 'finish off' a number of models I've been toying with over the past few weeks rather than plonk them away on a drawer for another day. Along with Don Uggie's minions and the aforementioned Wookies I have also got a rather sizeable Banderhobb by "Wizkids" to put the last touches too - something I'm especially keen to do so that the monster can participate in some of the games of "The Silver Bayonet" I have planned for the coming months...

(Lead) Mountain Musings - Monster May(hem) 2026

"Modiphius Entertainment" surprisingly made a big return throughout April 2026

Despite managing to complete my personal randomly drawn drawer challenge last month, my overall output was still a bit lower than what I had both expected or hoped. As a result I thought I'd accept Angry Piper's invitation to join his annual "Monster May(hem)" monthly challenge over on the "Dead Dick's Tavern and Temporary Lodging" blog, and finally finish a few of the larger models I have had just sat on one side away from my painting area for the past few years.

In addition, I thought I'd do a second drawer challenge, and this time initially appeared to be knee deep in old "Judge Dredd Miniatures Game: Block War" models from the rather controversial 2012 "Mongoose Publishing" Kickstarter - fourteen years has still not calmed my fury over this campaign. However, I also spied a plastic bag containing the classic 28mm metal figures Don Uggie Apelino and his Ape Gang by "Citadel Miniatures".

"Step into a cataclysmic struggle that will decide the fate of humanity’s soul…"

Admittedly these particular "rare, vintage" sculpts date back even further in time than my aforementioned collection of Matthew Sprange miniatures, all the way back to 1985 when Bryan Ansell's company released them in a blister as part of their "2000 A.D." Judge Dredd range . However not only should the set still fit in size-wise with my current painted Judge Dredd collection, but I seem to somehow own three copies of Fast Eeek. So 'he' will provide Don Uggie with some much needed multiple minions, along with the larger 'muscle' of Joe Bananas.

Furthermore, I have completed a third 32mm scale Bomb Coffin by "Trench Stench". As with the first couple of Sarcophagus Mines I recently completed, this model was downloaded for free as part of their three-figure set of STL (Standard Triangle Language) files from the company's "Patreon" subscription service; albeit having read the "Warbands of Trench Crusade" rulebook a force of Heretic Troopers is limited to only two such 'upgrades'.

April 2026 - No change at the top after a rather lack-lustre month's productivity

Forming part of their Ghosts of the Nomansland range for the "tabletop skirmish wargame that pits the forces of Mankind against the fiends of Hell", and produced using "Elegoo" Water Washable Resin on my Mars 5 3D Printer, the miniature was predominantly pigmented using "Vallejo" Bronze and "Citadel" Agrax Earthshade over a "Vallejo" Heavy Sienna undercoat. Although I did I use White Star by "Two Thin Coats" and "Citadel" Biel-Tan Green for the sculpt's spooky spectral flames.

Whilst the last four weeks wasn't the worst April I've recorded, it wasn't anywhere near as productive as I thought I was going to be, so I'm hoping that a plethora of big, scary monsters will help shake off this 'hobby funk' and see me rattle off a fair few miniatures. In particular I want to get at least another tiny unit of Napoleonic French by "Wargames Foundry" completed, as well as successfully make a start on the American Civil War models by "Perry Miniatures" I managed to assemble and prime last month. Plus, there's a big collection of unpainted scenery pieces currently loitering my hobby desk which need polishing off before they can be used for some actual games...

(Lead) Mountain Musings - "Modiphius Entertainment" April 2026

Last month's output was surprisingly dominated by "Crooked Dice Game Design Studio" and Super-heroes

Having successfully completed my four-month long Partially-Painted/Printed Pledge (PPPP), and rather pleasingly managed to better last year's 'score' of 246 points by a further 13 points, I thought I might turn to a range of 28mm "soft resin" models I haven't paid much attention to for six years. Indeed, it's been so long since I last picked up one of the Star Trek Adventures Tabletop RPG figures produced by "Modiphius Entertainment" that the entire range appears to have subsequently been 'shelved' as a physical product, and are now only available as part of their "Print at Home" STL (Standard Triangle Language) files.

Perhaps slightly disconcertingly I haven't actually decided to pigment a quartet of these figures over the next few weeks through choice either. But rather as a result of a D12 dice roll, which saw me number a dozen of my hobby drawers and then randomly pick one for this month's project. However, as luck would have it, the particular container chosen was simply packed full of all sorts of goodies, so in the end I did have some say in what my brush-tip would be tackling throughout April.

"What is your name..?"

Furthermore, I have also finished another 28mm scale white metal model by “Crooked Dice Game Design Studio” for the Angry Piper's "Forced March" painting event over on his "Dead Dick’s Tavern and Temporary Lodging" wargaming blog. Available either separately as Alien Legionary 1A, or as part of the company's four-figure Alien Legionnaries set, this Ernst Veingart sculpt is clearly strongly influenced by Danilo Donati's costume design for the Emperor Ming's minions seen in Mike Hodges' cult 1980 movie "Flash Gordon".

The trooper was predominantly pigmented using "Vallejo" Heavy Red, "Citadel" Carroburg Crimson and Abaddon Black. However,  his belt buckle and shoulder epaulettes were treated to a little "Vallejo" Gold and "Citadel" Agrax Earthshade, whilst his gloved hands received a smidgeon of "Vallejo" Dark Vermillion and "Citadel" Carroburg Crimson.

March 2026 - The battle between "Wargames Foundry" and "Games Workshop" is hotting up

Unfortunately, the previous month has been the worst March I've had productivity-wise since I first started noting my output well over a decade ago, and disappointingly I fear a lot of that inactivity has been due to my trying to push on with older projects as opposed to cracking on with newer ones. True, I have made a bit of a dent in my backlog (in some places). But a lot of the models I have finished won't see the tabletop on account of me still not having enough miniatures from that range for an actual game.

I'm therefore really hoping that my idea of randomly mixing up my painting subjects with some more recent purchases/3D prints will "Gee me [back] up". In recent years this month has been a rather slow time for me, so it should also offer me a good opportunity to get back on track with a few long-term gaming plans (e.g. Fielding some more Napoleonic units by "Wargames Foundry" for "Black Powder). In addition, despite my best intentions I still haven't got many actual battles 'in the books', and firmly believe that these spur me on when the hobby mojo is weakening...

(Lead) Mountain Musings - "Partially-Painted/Printed Pledge” [IV/IV] March 2026

Last month's output was a mixed bag of Science Fiction, Fantasy and Napoleonics

Thanks to a strong showing during the past four weeks, I'm pleased to say that I'm only 46 points short of beating my tally for last year's Partially-Painted/Printed Pledge (PPPP), and resultantly only need to paint another ten 28mm scale miniatures which I started working on prior to last December. Much of this success has undoubtedly been due to my continuing love of "Wargames Foundry" and their Napoleonic range. But also to a very sudden interest in the original version of the Middle Earth Strategy Battle Game (MESBG) by "Games Workshop" and a group of Hobbits' deadly encounter with lots of Uruk-hai at Parth Galen.  

Indeed, spurred on by this enthusiasm for Middle Earth I have already finished work on another 28mm scale Uruk-hai armed with a crossbow. Like a number of similarly equipped miniatures I currently have sat upon my hobby table, this particular metal "Games Workshop" figure had already been primed "Citadel" Abaddon Black from an earlier attempt to make it tabletop ready, so to begin with I just gave the model's armour and weapon/bolts a lick of "Scale 75" Decayed Metal, Thrash Metal and “Citadel” Nuln Oil.

 "We come to kill, by sun or moon."

I then applied a combination of "Vallejo" Heavy Red with a "Citadel” Devlan Mud wash onto the orc's flesh, and carefully applied some "Vallejo" Heavy Sienna and "Citadel" Agrax Earthshade over the creature's shoes, loincloth, hair, gloves, straps, belt, pouches and crossbow. As a final step, I treated the brute’s knife sheath to a little “Vallejo” Heavy Brown and washed it with (more) “Citadel” Agrax Earthshade.

Alongside my personal challenge's final month, I thought I'd also participate in Angry Piper's Forced March challenge over on his blog "Dead Dick's Tavern and Temporary Lodging". This means that I'll be predominantly focusing upon getting at least one infantry (or cavalry) unit completed during the month - providing "its more than a one-model unit".

February 2026 - The year already seems to be shaping up into a battle between "Wargames Foundry" and "Games Workshop"

Currently I have a number of such units I want to get finished, not least of which would be a sizeable gathering of Uruk-hai - possibly for the old The Lord of the Rings: War of the Ring mass-battle miniature wargame by "Games Workshop", so this new goal shouldn't really prove too problematic. In fact, my painting area is currently filled full of Napoleonic infantrymen, Alien Legionnaries, Beastmen and 3D prints which would adequately fit the bill if enough are pigmented.

As to whether or not something new might sneak up upon me as "The Lord Of The Rings" has, I cannot say. I have a number of one-off miniatures I would like to finally get finished - before they're probably stored away again in a box until next year's PPPP, and such diversions can invariably cause me to start wandering down yet another rabbit hole of wargaming which I hadn't anticipated venturing down before...

(Lead) Mountain Musings - "Partially-Painted/Printed Pledge” [III/IV] February 2026

Last month's output was largely dominated by "Games Workshop" and "Wargames Foundry"

Sadly there can be little doubt then when compared to some of my past January outputs, the last four weeks have proved pretty disappointing productivity wise. Indeed, I didn't manage to pigment even half of what I achieved just a couple of years ago in 2023. Having said that though, a lot of time was lost due to a slow start, and currently my enthusiasm for the hobby is so strong - especially for "Wargames Foundry" and their Napoleonic range, that I fully expect to make up some ground throughout February.

In addition, I've temporarily postponed a couple of new projects I had begun to 'scratch away' at, in favour of firmly focusing upon my Partially-Painted/Printed Pledge (PPPP) and making far more in-roads towards my target tally for that. Last year I managed to finally finish 246 points worth of semi-completed figures, and was planning to better that this time round. However, having just past my personal challenge's half-way stage, I've only got 119 points tabletop ready - so have set aside my plans for Napoleonic cavalry and cannon units (some of which have literally just arrived through my letter box), and swapped them out for a sizeable selection of already-based Austrian Fusiliers, Moscow Militiamen and Frenchmen marching in greatcoats.

"In military operations, hours determine success and campaigns."

To get things off with something of a bang I have finally managed to get a coat of "Vallejo" Matt Varnish on an eighth skirmisher I have had loitering around my painting desk for quite some while. Found inside the “Wargames Foundry" blister FN054 - Light Infantry Chasseurs Advancing, the miniature Frenchman was undercoated using a little "Vallejo" Surface Primer Black and "Citadel" Abaddon Black, before having his uniform/cuffs layered in "Vallejo" Heavy Blue and "Citadel" Drakenhof Nightshade.

The soldier's various leather straps were treated to some White Star by "Two Thin Coats", before being 'weathered' with some watered-down "Citadel" Agrax Earthshade. Furthermore, I 'picked out' all of his extra details, using colours such as as "Vallejo" Heavy Green and "Citadel" Biel-Tan Green for the man's epaulettes and sabre-briquet ribbons, "Vallejo" Sombre Grey and "Citadel" Nuln Oil on his bedroll, and "Two Thin Coats" White, Skulker Yellow, and "Citadel" Reikland Fleshshade for the Frenchman's helmet plume.

January 2026 - "Blood Bowl", Napoleonic Soldiers and Super-Heroes dominate the current chart

Alongside my burgeoning Black Powder collection, I am also planning on working through a number of primed "Crooked Dice Game Design Studio" models I've had lurking in a drawer beside me for many a month. Whether this encourages to return to the company's skirmish ruleset "7TV" I don't know. But there's a good chance many of the figures will make an appearance on my "Silver Bayonet" tabletop as I primarily use Karl Perrotton's miniatures for any encounters my warband might have with wandering monsters, the Undead or musket-carrying bandits.

Lastly, I'm still very much in the mood for producing various items of scenery with my "Bambu Lab" A1 Mini, and am quietly working away in the background on some of the terrific terrain I received as free STL (Standard Triangle Language) files from "Steamforged Games" as part of their Warmachine 3D: Gravediggers release in April 2025. I've also got a bit of a backlog building courtesy of "Saucermen Studios" and their "Beyond The Trenches Of Despair" Kickstarter. So expect to see a fair few Whether ruined walls, trench systems, bunkers, towers and concrete barricades appearing over the coming months.

(Lead) Mountain Musings - "Partially-Painted/Printed Pledge” [II/IV] January 2026

Last month's output ranged from spacecraft to spacemen, and even a small bit of terrain

Having already completed a quarter of my latest Partially-Painted/Printed Pledge (PPPP) I thought I'd spend the next four or so weeks focusing upon a number of 28mm plastic soldiers produced by "Warlord Games" - which frankly have been gathering dust on my shelves for far too many months. The majority of these figures will be World War Two Italians, as having bought the Nottingham-based company's "Bolt Action" Third Edition rulebook, as well downloaded their Italy Army List [dated September 2024], I thought I might finally finish a force of Benito Mussolini's fascists I've previously assembled, based and undercoated.

In addition, I couldn't resist recently picking up a copy of Issue 454 of "Wargames Illustrated" as it had a sprue of US Firefly Jump Infantry 'cello-taped' to its front cover. In the past I've experimented with "Konflikt '47" using my quite considerably-sized collection of "Secrets Third Reich" miniatures by "West Wind Productions". But never got on with that range's Jet Soldiers - finding the sculpts significantly smaller than the rest of my models. So thought I might try the 'official' figures for a change, and maybe even pick up half-a-dozen Axis Stahltruppen Heavy Infantry as opposition if the mood takes me.

"Warlord Games" WIPs - Three of the six US Firefly Jump Infantry I've assembled for "Konflikt '47"

I'm also eager to continue working on the brood of Zeek Scuttlers by "Artisan Guild" I have produced using "Elegoo" Water Washable Resin on my Mars 5 3D Printer. With my unit of Burrowers now finished and ready to represent a Tidal Swarm for the Trident Realm Of Neritica in "Kings Of War", I plan to get both my army's leader and a couple of basic infantry units completed 'toot sweet.'

Lastly, I haven't forgotten how badly my Napoleonic project has started floundering in recent times. I was fully expecting to have doubled the number of French skirmishers and Russian militia I could field over the past few weeks. However, disappointingly I haven't finished a single one, and now enter a year in which I had planned to solely focus upon cavalry units rather than (more) infantry. As a result I hope to get the eight outstanding soldiers finished as soon as I can, and then potentially look at only doing a handful of horsemen before plunging back to more muskets and bayonets.

"Wargames Foundry" WIPs - This Napoleonic French skirmisher is now close to competition

There can be little doubt that my productivity over the past few months has been somewhat low when compared to my output of previous years. To be fair a lot of this has been down to the sheer variety of miniatures currently available to me - something which has caused me to leap from one manufacturer to another with little rhyme or reason. The number of STL (Standard Triangle Language) files I now own in embarrassingly high and means I now spend a lot of my hobby time tinkering with my 3D printers rather than actually putting a brush-tip on a model.

Somewhat disconcertingly I don't see that changing any time soon either, as I have now started printing and painting scenery too - something I've always tried to avoid in the past. Of particular note has to be the numerous pieces of scenery I just acquired from "Saucermen Studios" via their "Beyond The Trenches Of Despair" Kickstarter. Whether it be ruined walls, trench systems, bunkers, towers or concrete barricades, I am currently slowly producing as much of this stuff as my "Bambu Lab" A1 Mini can cope with - and then I'll be moving onto another terrain project concerning various sewers, dungeons and pyramids following the success of "Death x Tiles: The Lost Temple" campaign by "Cast N Play"...

(Lead) Mountain Musings - "Partially-Painted/Printed Pledge" [I/IV] December 2025

Painting output for November 2025

Having had a rather lack-lustre November where I was much more focused upon 3D printing more miniatures than actually getting any paint on them, I thought I had better knuckle down for the following month and begin my annual Partially-Painted/Printed Pledge (PPPP) -  a seventeen week long personal challenge to pigment as much of my unfinished backlog as I can. Last year I only managed to whittle away at half of the models I had planned to pigment - attaining a total of just 246 points using my tried and tested productivity scoring system. So this time round I have a target to beat. 

First in the firing line are a number of 32mm Soviet Cosmonauts (and a couple of NASA Astronauts) by "Black Site Studios" which I produced on my "Elegoo" Mars 5 3D printer for their "Lunar" skirmish game. Rather embarrassingly, all of these figures should have finished by now, so I aim to get the vast majority of them tabletop ready toot sweet. In addition, I aim to play a few games featuring the models in order to test out my homebrew Moonscape rules based upon "The Silver Bayonet" by "Osprey Publishing". This always helps refuel my enthusiasm for a project, so I'm hoping it will help re-energise this one too.

"Artisan Guild" WIPs - These Zeek Scuttlers have all been primed using "Vallejo" Heavy Brown

In addition, I really want to get cracking on a number of Zeek Scuttlers I recently printed to use for "Kings Of War" by "Mantic Games". I'll be adapting this race of insectoid thieves into some crab-like denizens so as to represent the Trident Realm Of Neritica, and am close to completing my predominantly brown-green colour scheme's test piece. A good percentage of my starting force - consisting of a leader with three infantry regiments and a swarm are already based ready for my paint-brush, so with any luck a number of these wonderfully-detailed STL (Standard Triangle Language) files will be fully varnished and flocked before the PPPP concludes.

Sticking with "Mantic Games" and 3D printing, I'm also hoping to knuckle down and get a fair few of the Nottingham-based manufacturer's Epic Warpath miniatures done. Perhaps unsurprisingly given how many of the 10mm models I can squeeze onto my Mars 5's build plate, I already face an almost overwhelming sea of grey resin soldiers, infected monsters and space dwarves. So I really need to get a fair few finished before I'm completely overwhelmed by them.

November 2025 - No change whatsoever with my favourite manufacturers of the year

Lastly, I still own an embarrassing number of unfinished Napoleonic Infantrymen by "Wargames Foundry" - many of which I first worked on over a year ago. This particular Black Powder project has fallen way behind schedule, and I now doubt I'll ever catch-up to where I wanted to be with it. However, next year I fully intend to get some cavalry units completed, and maybe the odd cannon crew too - both of which are needed to play Mike Lambo's "Battles of Napoleonic Europe: A Solitaire Wargame" properly.

My fingers are most definitely crossed that all these plans will help bolster my wargaming fruitfulness after the worst November I've experienced since I first began keeping a record of my hobby productivity over a decade ago. Of course, I wouldn't have minded too much if it was due to me being more busy playing than painting. But sadly that simply hasn't been the case...

(Lead) Mountain Musings - "Black Site Studios" November 2025

"Pits rival crews of astronauts against one another as they struggle for control over the precious resources of Earth's moon."

With my "Elegoo" Mars 5 3D printer currently churning out all manner of miniatures using water washable resin, I felt it might be prudent to continue painting a load of "Lunar" models by "Black Site Studios" for the next four weeks, rather than move on to another project instead. In fact, I've even gone so far as to dig out the resin cast/plastic kits I bought from the America-based manufacturer's UK stockist "Spectre Miniatures" in November 2024 - so fully intend to have some members of the Japan Aerospace Exploration Agency (JAXA), a handful of R.O.C Taikonauts, and a fair few Freelancers before the month is finished.

In addition, I'm hoping to get elbow-deep in Trench Crusade by getting a good dozen or so STL (Standard Triangle Language) files printed/pigmented by "Trench Stench" ready for the tabletop. I don't admittedly know a lot about the different factions for during this skirmish game's alternate World War One timeline. But having subscribed to the company's Tribe on My Mini Factory, I have already acquired enough sculpts to field two noticeably distinct factions.

"Black Site Studios" WIPs - These three astronauts have been undercoated and shaded

Furthermore, I couldn't resist the recent "Penance 1914" Kickstarter campaign by "Westfalia Publishing", which consists of plenty more "32mm Weird War Miniatures for Games in Nomansland." Amongst all the numerous Sisters of Mercy, Nomansland Crusaders, and Macabees are some Wild West-flavoured Gunslingers and Desperados which will quickly find themselves on my Mars 5 3D printer's plate just as soon as I receive my pledge.

Lastly, I have not forgotten I'm a bit behind with my Napoleonic project plans for the year, so fully intend to complete not only the one remaining British Grenadier I have partly-pigmented. But also at least four more Austrian fusiliers. To help spur me on with this particular target using "Wargames Foundry" figures, I have purchased a copy of Mike Lambo's "Battles of Napoleonic Europe: A Solitaire Wargame", and fully intend to play out some of its scenarios using my 28mm metal miniatures using my old Hexon - Hex Terrain by "Kallistra Limited".

October 2025 - No change with "Wargames Foundry" still in top spot

Despite something of a spurt towards the end of last month, there is no doubt that I didn't produce anywhere near as many freshly-painted models during October as I had hoped. However, I did manage to 'kick-start' my previously abandoned plans for my "Lunar" backlog - even if by doing so I actually ended up producing more miniatures than I actually had when I first fell for the range back in September 2024.

I also intend to visit the Farnborough International Exhibition and Conference Centre in a couple of weeks time for "Warfare 2025", and will undoubtedly end up purchasing (as well as potentially pigmenting) a few surprise items from that event. In fact, as far as my hobby mojo goes, nothing can beat a good, inspiring wargaming show to ramp up my enthusiasm to do a fair few lengthy hobby sessions - especially if the subject matter is one which I've only just discovered - such as last year's Apocalypse Survivors by "Athena Miniatures"...

(Lead) Mountain Musings - "Black Site Studios" October 2025

"The peaceful dreams of Mankind bridging the stars was short lived."

As I have recently restarted 3D printing a number of models for "Lunar" by "Black Site Studios" - having finally finished painting all the resin cast miniatures I bought from them over four years ago, I thought I'd spend this coming month getting enough spacemen tabletop ready to actually have a game using "The Silver Bayonet" ruleset and some homebrew additions. Ideally, I'd therefore like to get at least three or four NASA Astronauts and Soviet Cosmonauts completed, as well as maybe even finally start assembling/pigmenting a number of Japanese and Chinese 'rocketeers' I purchased via UK stockist "Spectre Miniatures" in November 2024.

Alongside these figures I would also like to get some more of the various sized asteroids produced by "Fat Dragon Games" done. Now admittedly, these space rocks were sculpted to float about the galaxy for the company's (not) "Star Trek" starship battle game "Battlefront Valkyrie". But having decided to 3D print a number of them out using a "Bambu Lab" A1 mini and subsequently super-glue them to some 3mm thick MDF stands by "Warbases", I thought they'd also make excellent terrain pieces for the Moon's (or at least Mars') surface too.

"Black Site Studios" WIPs - These three Soviet Cosmonauts have been shaded with "Citadel" Carroburg Crimson

Sticking with the theme of taking scenic items and repurposing them for conflicts in outer space, I've dug out three bags of Shell Holes by "Magnetic Displays". Designed to populate a battlefield, I intentionally bought them to use as impact craters on the moon, and plan to use them as difficult terrain - which will need to be jumped over entirely if the astronaut doesn't want to be slowed down - for my homebrew rules.

Lastly, I perhaps rather ambitiously aim to continue ploughing through my vast backlog of "Wargames Foundry" miniatures and get at least another four Napoleonic soldiers ready for some "Black Powder" or "The Silver Bayonet". I'm particularly keen to get a quartet of British infantrymen ready for a matt varnish, as I seem to have been 'picking away' at the contents of the Newark-based manufacturer's Late Line Infantry Flank Company Shouldered Arms blister for more months than I care to remember.

September 2025 - "Wargames Foundry" surprisingly takes to the top spot

On paper, September showed just a small improvement over my previous period's productivity, and was therefore rather disappointing in some ways. However, quite astonishingly I did manage to polish off half a dozen Napoleonic Austrians, and get another eight ready for my brush-tip when the time arrives. This really was quite a shock to be honest, as I always find the heavily detailed Perry sculpts to really eat into my limited hobby time. My (limited) success with the range though has meant that "Black Tree Design" have at long last been toppled from the top spot as my favourite company of 2025 - for now at least.

As to the future, I would have thought "Knight Models" monthly release through "My Mini Factory" for their "Batman Miniatures Game" will certainly begin to make itself felt on my hobby table. I've still got a long way to go to finish all thirty-one figures included in their opening file for Tribes, and have since received thirteen more on top of that...

(Lead) Mountain Musings - "Fat Dragon Games" September 2025

"The heroic captain and the intrepid doctor cross interstellar space to preserve our health!"

Due to my enthusiasm for all things 3D printed currently being rather high, I thought I'd indulge my passion for using the "Bambu Lab" A1 mini and spend the next four or so weeks focusing upon "Battlefront Valkyrie" by "Fat Dragon Games". Admittedly, I already have enough Terran and Kurgun starships to play a few "Star Trek" flavoured games using some old homebrew rules. But with "DriveThruRPG" recently having a sale on, I've also picked up quite a few more space vessels, as well as pieces of debris and assorted non-combatant craft too.

My plan is therefore to get some small skirmishes under my belt, and then simply build up two opposing fleets. One thing I am currently a little short of though is suitable terrain, so perhaps unsurprisingly, I have already finished painting a second medium asteroid by "Fat Dragon Games". This 50mm tall space rock is included in the company's "Battlefront Valkyrie" Starter Set, and was produced using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer.

"In the 22nd century, Nausicaan pirates built cargo bases into asteroids."

The space rock was super-glued onto a 60mm round MDF base by "Warbases", and painted using "Citadel" Abaddon Black, "Vallejo" Sombre Grey, "Citadel" Nuln Oil and "Vallejo" Heavy Bluegrey. In addition, I gave its stand a serious sprinkling of 2mm tall Chilli Red flock, as I also plan to use the piece as scatter terrain for some future 'moon-based' battles using the "Lunar" 32mm resin miniatures I've previously pigmented by "Black Site Studios".

Furthermore, I'm really hoping to get at least another quartet of 28mm Napoleonic Austrians finished. This ongoing project using "Wargames Foundry" figures has badly fallen behind schedule in recent months, so I need to push on with it in the background - and felt sticking with some more of Emperor Francis I's soldiers would make my progress a little bit easier. However, I have found a handful of previously started models in my backlog, consisting of British and Frenchmen, so may well try to crowbar these into the painting queue whenever possible.

August 2025 - Last month's Napoleonic push sees "Wargames Foundry" return to the table

Sadly, the last few weeks have not been anywhere near as fruitful as I had hoped - at least on paper. I did manage to hit my (now monthly) goal of completing four Napoleonic Austrians, and also a flotilla of simple-looking starships. However, I also spent some considerable time working on various bits of 3D printed terrain - something I rarely do, and which I don't actually count when working out my overall productivity. So I've achieved a little bit more than the numbers give me credit for.

Somewhat frustratingly, I don't see this situation changing any time soon either, as I'm now rather committed to printing and painting a sizeable Anglo-Saxon village which can be used for "Pillage" by "Victrix Limited" (as well as "The Silver Bayonet" by "Osprey Games" at a stretch). Although I have pulled out the rest of my 10mm Falklands British Army Pack models by "Pendraken Miniatures", with a view to getting the majority of them ready for battle - and being so tiny they're rather straightforward to paint in large(ish) numbers...

(Lead) Mountain Musings - "Wargames Foundry" August 2025

"The Austrian army was one of the largest and best-trained."

Despite enjoying a solid nine or so weeks working my way through my current obsession with super-heroes, I believe I had best spend the next month (once again) focusing upon my startlingly large collection of unpainted 28mm metal Napoleonic figures by "Wargames Foundry" instead. I did have some considerably high hopes for this particular project at the start of the year - with my main goal being to have enough miniatures tabletop ready for a small, modest game of "Black Powder". But sadly this target has largely fallen by the roadside as my hobby interests have subsequently journeyed in a completely different, non-historical direction.

Currently however, I am also playing a fair bit of "The Silver Bayonet" by "Osprey Games", and having fielded a Russian force a fair few times recently, I thought I might attempt to play as the Austrians for a change. This means I need to pigment a number of (standard) infantrymen and an officer (or two) to join my already finished trio of Jaegers - so should resultantly present a fairly achievable target for the coming period.

 "Wolves can manoeuvre through large areas of the battlefield."

Sticking with Joseph A. McCullough's "skirmish wargame of gothic horror" I have also completed a fifth model from the Tribal Nations Wolves boxed set by "Warlord Games" - which I use as Dark Wolves. This 28mm metal example of Canis lupus was primed in "Vallejo" Sombre Grey, shaded using "Citadel" Nuln Oil, and dry-brushed with (more) "Vallejo" Sombre Grey. I then gave the animal's legs, belly, throat and maw a few licks of "Two Thin Coats" White Star, before shading these areas with "Citadel" Agrax Earthshade, and highlighting them back up with (more) White Star by "Two Thin Coats".

To complete the look of the wolf's fur, I later dry-brushed a fairly rough line of "Vallejo" Heavy Bluegrey along the middle of the figure, and (hopefully) blended the colour in with some additional touch-ups of (even more) "Two Thin Coats" White Star and "Vallejo" Sombre Grey. In addition, I dotted the animal's eyes and nose with some pure "Citadel" Abaddon Black, and traced out its fangs with a combination of White Star by "Two Thin Coats" and "Citadel" Agrax Earthshade.

July 2025 - Both "CoolMiniOrNot" and "Crooked Dice Game Design Studio" prove popular

With one of the most productive months of the year behind me, I'm pretty confident that the next few weeks will see a similarly successful time - especially as I have little intention of setting aside the numerous 40mm sculpts by "CoolMiniOrNot" and "Big Head Chibis" I intend to use for the Marvel Multiverse Role-playing Game (MMRPG) I'm still progressing. This "fun, engaging dive into the world of Marvel Comics" has really helped reinvigorate my enthusiasm for the hobby, and should hopefully cause me to get a few more comic book characters finished in good time.

Furthermore, I've got a few miniatures for games such as "The Horus Heresy" by "Games Workshop", "Pillage" by "Victrix Limited" and "Battlefront Valkyrie" by "Fat Dragon Games" to work on - as well as a load of scenery to boot. So it's not as if I don't have an entirely different genre, if not scale, to move across to if I suddenly find my current interests waning after a few weeks...

(Lead) Mountain Musings - "CoolMiniOrNot" July 2025

"Besides our own universe, there’s countless others, each with their own versions of super heroes and villains."

Having seemingly found the better part of my hobby mojo during the past four weeks, largely thanks to a deep interest in the Marvel Multiverse Role-Playing Game (MMRPG), it seems pretty obvious to keep the momentum going for at least another month by painting some more "CoolMiniOrNot" 40mm plastic models for their collaborative boardgame Marvel United. Admittedly, I only managed to get a quartet of super-heroes tabletop ready - and one of those was already partially-pigmented. But my enthusiasm for the MMRPG has never been higher, and I'm currently determined to play some games using the Chibi-style miniatures just as soon as I can.

Furthermore, my need for some hoodlums, goons and toughs to get beaten up by the likes of Nick Fury, Doop and the Black Panther, has also got me back using my Mars 5 3D resin printer by "Elegoo". Originally, I rather naively thought I could just buy some of the Marvel United gaming pieces separately, so as to field a handful of Ultron drones or Hydra terrorists. However, the second-hand market (e.g. eBay) has proved far too expensive for such a plan, with most single figures fetching a distinctly off-putting tenner a pop (including postage & packaging).

"Big Head Chibis" WIPs - Lady has been primed, and is currently having her base worked on

As a result I have turned to the likes of "Big Head Chibis" on "Patreon", and subscribed to their monthly service. This has already given me access to some STL (Standard Triangle Language) files which I can use to produce a number of generic minions, as well as some other sculpts that should make good hapless civilians to rescue/protect. Such models really will be crucial for some of the larger games of MMRPG I have planned, as simply having a few A-List characters repeatedly stood battering one another will inevitably get pretty boring quite fast.

To begin with, I've printed off a copy of Lady, who seems to be partially based upon Staff Sergeant Hart-Burnett from the animated television series "G.I. Joe". I figured she looked pretty jungle-themed in her green-hued attire, so would make a good goon for some nefarious expedition into the Kingdom of Wakanda or the Savage Lands. My plan is therefore to use this particular miniature as a test-piece for a colour scheme, and then produce a few more (possibly mirrored) to bulk out the squad.

June 2025 - Little change in my Top Five Manufacturers

June has historically always been an incredibly poor time for my painting, going back a good decade, so despite me failing to finish as many figures as I had initially intended, overall it was actually quite the success. Indeed, compared to the previous month, it was a positive triumph, and has even seen me start a completely new project in the form of "Star Wars: Shatterpoint" by "Atomic Mass Games" - albeit, the issues I've had assembling some of these miniatures has already badly dented my desire to glue any more together for the moment.

This month I have a good handful of (more) Marvel United figures close to completion, and alongside the 3D prints from "Big Head Chibis" this should see me playing a few games of MMRPG. If that does happen, I would imagine my output will increase even further, as I always find rolling some dice and actually using painted pieces on the tabletop really enthuses me to get even more models completed. Plus, I haven't completely taken my eye off the ball when it comes to my hefty Napoleonic backlog by "Wargames Foundry"...

(Lead) Mountain Musings - "CoolMiniOrNot" June 2025

"In Marvel United, players must work together to stop the plans of an evil Super-villain."

After a pretty miserable May where I frankly painted next to nothing, I thought I'd try to remotivate myself by tackling a number of half-finished 40mm plastic super-heroes and villains by "CoolMiniOrNot". This will certainly help clear a little space on my hobby table as I rather embarrassingly own a fair few of these Marvel United gaming pieces, having decided to 'invest' in the range rather than purchase any more "Heroclix" figures, or those outrageously expensive models produced by "Atomic Mass Games" for Marvel Crisis Protocol.

Furthermore, I aim to complete all the various creatures by "Crooked Dice Game Design Studio" I began assembling and priming for Angry Piper's "Monster May(hem)" monthly challenge over on the "Dead Dick's Tavern and Temporary Lodging" blog. Obviously that particular event is now over. However, as I only managed to pigment a single entry for it, I thought I should at least conclude what I started - as opposed to my usual tactic of just sticking the things in a drawer, or plonking them on a shelf simply to gather dust.

"The United Nations called upon Argentina and the United Kingdom to reach a settlement of the sovereignty dispute."

With this mental attitude in mind, I have also finished five more 10mm metal British soldiers by "Pendraken Miniatures" which form part of the company's Falklands British Army Pack. Consisting of a single figure from the following codes: FLB20 - Advancing with SLR, helmet, FLB21 - Advancing under fire, helmet, FLB22 - Kneeling, firing SLR, helmet, FLB23 - Standing, firing SLR, helmet, and FLB24 - Standing, firing SMG, helmet, the quintet were super-glued onto a 30mm x 40mm plastic base.

The models were all undercoated with a couple of layers of "Vallejo" Heavy Grey, and drowned in "Citadel" Agrax Earthshade. I then dry-brushed them with (more) "Vallejo" Heavy Grey, and patiently 'picked out' all their boots, hands, faces and weapons using "Citadel" Abaddon Black. For the troopers' skin I applied a little drop of "Vallejo" Heavy Skintone, followed this up with a dash of "Citadel" Reikland Fleshshade, and ended the process with a small highlight of (more) "Vallejo" Heavy Skintone. 

May 2025 - "Athena Miniatures" joins "Black Tree Design" as my favourite current manufacturer

Lastly, the soldiers' guns were simply given some "Vallejo" Gunmetal and splashed with "Citadel" Nuln Oil. Whilst I applied a combination of "Vallejo" Heavy Sienna and "Citadel" Agrax Earthshade to any visible rifle butts, and any visible rear ammunition belts or backpacks.

Despite the disappointing output of last month, this humble blog did receive its one millionth visit, which is definitely one milestone I never thought I'd reach. Whether such a landmark will help me break the current funk I'm suffering with I don't know. But it has already caused me to pick up my brushes for a few hours, so I'm increasingly hopeful I'll have a fair few miniatures to post about over the forthcoming weeks.

(Lead) Mountain Musings - Monster May(hem) 2025

"In the Dungeons & Dragons fantasy role-playing game, the term monster refers to a variety of creatures."

Having taken a few weeks sabbatical from my hobby table, I thought I would step back into my painting and wargaming 'guns a blazing', and take up Angry Piper's invitation to join his annual "Monster May(hem)" monthly challenge over on the "Dead Dick's Tavern and Temporary Lodging" blog. Resultantly, I have dusted down a few intimidatingly large models which have been unceremoniously side-lined over the years, as well as selected a few (semi-new) miniatures I may well assemble/paint alongside them.

In addition, I fully intend to crack on with a number of partially-pigmented Napoleonic figures I was toying with just last month. Indeed, whilst I aim to get a few "big and mean" monsters completed for the aforementioned non-competitive contest, my main aim over the next four or so weeks is to at least get a couple more (tiny) units tabletop ready for my "Black Powder" Coalition forces. This should then encourage me to work on a similar number of the Emperor Bonaparte's soldiers throughout June (and maybe July too).

"Terrorist! Kill him!"

Speaking of long-running projects, I have completed another 28mm metal figure by "Athena Miniatures" from their Apocalypse Survivors range. This particular sculpt is from the company's AS12 Russian NBC four-figure set, and is the eleventh such soldier I've got tabletop ready since first encountering the Swindon-based manufacturer at "Warfare" 2024. 

As with all the other Soviet Radiological, Chemical and Biological Defence troopers, the model was initially undercoated using a couple of layers of “Vallejo” German Fieldgrey WWII, and shaded in "Citadel" Nuln Oil. The 'invader' was then dry-brushed with (more) “Vallejo” German Fieldgrey WWII so as to bring out all the folds/creases in his rubber suit, and subsequently had his buttons/rifle butt 'picked out' with a combination of "Vallejo" Heavy Sienna and "Citadel" Agrax Earthshade.

April 2025 - A less than productive time has caused little change in my favourite manufacturers

Despite a fairly encouraging start last month, my productivity completely dried up by the end of April, leaving me with a semi-successful output when compared to what I usually achieve annually at this time of the year. However, I did finish enough Moscow Militiamen by "Wargames Foundry" for a four-man unit, and 'chewed' through a fair few 10mm Xenomorphs by "Pendraken Miniatures".

This dalliance with the smaller scales probably won't stop any time soon either, as I'm really enjoying the simplicity of such figures when compared to the complexity of Napoleonic uniforms. Together, I think they make a good combination to help me push through some time-consuming paint-jobs, and should also help me maintain my enthusiasm whilst tackling the "big jobs" I have planned for "Monster May(hem)" too...  

(Lead) Mountain Musings - "Wargames Foundry" April 2025

"During the Napoleonic era, bears primarily appear in historical contexts as symbols in art and political cartoons."

With my self-imposed Partially-Painted/Printed Pledge (PPPP) now over, and a number of old half-finished figures tabletop ready as a result, I thought I'd spend this month once again ploughing on with my rather large collection of unpainted 28mm metal Napoleonic figures by "Wargames Foundry". To be honest I'm already quite a way behind with my Black Powder goals for this year, as I've only completed two of the twelve miniatures I promised myself I'd have done at this point in 2025, so dedicating at least four weeks worth of hobby-time to some flintlock-bearing fusiliers should be a good way of getting the long-term project back on track.

To begin with I'm planning on pigmenting at least enough Moscow Militia with Muskets to field a small unit of Narodnoe Opolcheniye (four models), and add them to my Coalition forces. I was actually rather naughty this past October on "eBay" as I splurged on a twenty-eight man Russian Infantry battalion auction I spotted, so really need to start making some in-roads into these Alan Perry sculpts sooner rather than later.

"Alternative Armies" WIPs - This trio of Taranis Runner Drones are almost finished

I'm also blatantly aware that apart from a few 95th Rifles and accompanying officer, my consortium of Napoleon Bonaparte's enemies isn't at all flush of British miniatures. Much of this deficit is largely due to how badly intimidated I am by the formidable palette needed for Redcoats, and an aversion to anything tartan. However, I think I may well now have some basic colour schemes which will help 'get me over this hump', and allow me to get a fair few of King George III's men battle ready.

Furthermore, I still hope to tinker with some of the remaining 15mm science fiction figures I didn't quite finish for my PPPP. These all came from The Ion Age range by "Alternative Armies", and shouldn't take too long to add to my already quite significant (not) Rogue Trader armies. Indeed, I'm actually tempted to dig out a few more of these old(ish) models to help fill out some of my different forces' more specialist units - particularly their characters.

March 2025 - Two new entries have stormed up into the leaderboard

Historically, the last four or so weeks have always been one of my most productive times and this year was absolutely no exception. A good deal of this success was undoubtedly due to my sudden descent into the Dead Man's Hand range of Wild West gunslingers by "Great Escape Games", and determination to work through some more Russian NBC Troopers by "Athena Miniatures" - albeit not anywhere near as many as I had intended. The big surprise though was the blister-load of "Pendraken Miniatures" 10mm Falklands British soldiers I patiently picked away at over time, and I'm rather hoping I can do something similar with the rest of the Army Pack for this month too.

What will be interesting is whether or not my productivity will now nosedive, seeing as I didn't participate in the Analogue Hobbies Painting Challenge (AHPC), and so shouldn't be suffering from any gaming fatigue. Annually, this waning interest in 'applying a brush tip to a model' is always a big disappointment to me, so I am keen to avoid such lethargy this time round, and maybe get a few battles in to help fuel my enthusiasm for the various projects I want to progress...