"Zoinks!" A Ghost!"

 "Hold your breath, and don't move a muscle!"

This 28mm scale white metal model is produced by “Crooked Dice Game Design Studio” and can be bought either separately as MINI 1336 Undead Astronaut, or as part of their DEAL 375 Spooks four-figure set. The miniature is sculpted by Andrew May and is clearly influenced by the villain from the 1969 "Scooby-Doo, Where Are You!" animated episode "Spooky Space Kook".

Able to leave "glowing footprints and fingerprints that dissipate after an undetermined time", the model was primed using "Vallejo" Steel Grey and heavily shaded with plenty of "Citadel" Nuln Oil. It was then enthusiastically dry-brushed using some (more) "Vallejo" Steel Grey, before having its elbow/knee joints, as well as its belt carefully 'picked out' with a little "Citadel" Abaddon Black.

"Modiphius Entertainment" WIPs - This Vulcan scientist is almost tabletop ready

The miniature was actually a bit more complicated than its cartoon counterpart, so I decided to apply a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil to its belt buckle and the tubing on its back-mounted breathing apparatus. I next tackled the ghostly apparition's infamous glowing skeletal face by dabbing a load of White Star by "Two Thin Coats" into its open space helmet and later giving the area a good dousing in some watered-down "Citadel" Flesh Tearers Red.

This approach certainly gave Henry Bascomb's disguise a nice, gory head, especially when I subsequently highlighted it with a little additional "Two Thin Coats" White Star rather than use the colour of the foiled criminal's space-suit as seen in the television show. Perhaps unsurprisingly, I thought this 'change' made the head look a bit too stark in comparison to the rest of the body, so I blended it in a bit with a touch of "Citadel" Carroburg Crimson.

"Modiphius Entertainment" WIPs - A trio of "The Next Generation" ensigns partially painted

Alongside my latest (not) Scooby-Doo villain I have been progressing a number of Federation crewmen by "Modiphius Entertainment". In particular a Vulcan scientist for my "Star Trek: The Original Series" Landing Team. I'm not sure whether the "Citadel" Nuln Oil over the female ensign's legs has particularly worked as black tights, as the technique did for Lieutenant Uhura's much browner legs, so I've actually applied a second shade on them to see if that sits better.

In addition, I've turned my eyes to working on an Away Team for the U.S.S. Enterprise-D's timeline, even discovering a Tellarite crewman amongst my previously assembled backlog. Hopefully, due to the lack of colour on their Starfleet uniforms, these miniatures will prove a lot faster to get tabletop ready, and help me successfully achieve my random drawer challenge for this month with a few days to spare...

"These Brutal Beasts May Be A Lost Underground Dwellers..."

"...Or come from a land before time." 

This 28mm scale white metal model is produced by “Crooked Dice Game Design Studio” and can be bought either separately as Beastman 3A, or as part of their DEAL 397 Beastman 3 four-figure set. Despite being by sculpted Ernst Veingart, I must admit to not being a big fan of this particular miniature as I dislike the patches of furry hair covering the savage's chest and forearms - something which arguably appears all the more bizarre-looking when looking at the 'official' light-skinned paint-job.

As a result I decided to undercoat mine with a couple of layers of "Vallejo" Heavy Sienna and splosh him with "Citadel" Agrax Earthshade. I then went back with some highlights of (more) "Vallejo" Heavy Sienna on the brute's facial features and fingers. This colour scheme definitely helped mask the aforementioned details I disliked without me having to resort to filing them off - which is something I did actually consider.

"Modiphius Entertainment" WIPs - A trio of Federation officers at various stages of completion

The Beastman's loincloth was pigmented with a combination of "Vallejo" Heavy Brown and "Citadel" Agrax Earthshade, before I 'picked out' the seemingly chain-linked belt threaded around the fellow's waist with a little "Vallejo" Gunmetal and "Citadel" Nuln Oil. As with the previous Beastman I've completed I did consider dry-brushing the animal fur with a bit more "Vallejo" Heavy Brown. However, as I wanted to use this model as cave-dwelling savage for "The Silver Bayonet" by "Osprey Games" (using the Cultist or maybe Ghoul rules), I felt he'd probably be extremely dirty, so left the piece of 'clothing' alone.

Finally, I used some "Citadel" Rakarth Flesh and Agrax Earthshade on the brute's brain-battering animal bone, dry-brushed the hand-weapon with a tad more Rakarth Flesh, and lastly added a smidgeon of "Vallejo" Dead White to it as a highlight. I also dropped a little "Vallejo" Gunmetal along the metal ring sticking out from the implement's bottom, and darkened it down with a splash of "Citadel" Nuln Oil.

"Death X Tiles" WIPs - These Starship Mini Set pieces have been shaded in "Citadel" Nuln Oil

With the second of my Beastmen finished I have moved on to the four "Star Trek" miniatures by "Modiphius Entertainment" I am aiming to get tabletop ready before the month is out. Admittedly, most of these crewmen have simply been 'dusted down' rather than been assembled from cast resin sprues. But I do aim to have a nice mixture of officers from both The Original Series (TOS), and "Star Trek: Deep Space Nine" ready for action over the next few weeks.

Furthermore, I'm still very keen to contribute to Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog by polishing off some of the many terrain pieces I have produced in "Bambu Lab" PLA (Polylactic Acid) on my A1 Mini 3D Printer. To be honest, this is probably going to be something of a slow approach as I'm not a fan of painting terrain at the best of times. However, I have managed to get some basic "Citadel" Nuln Oil washes on a trio of Starship Mini Set pieces by "Death X Tiles"...

(Lead) Mountain Musings - "Modiphius Entertainment" July 2026

"Crooked Dice Game Design Studio" dominated my miniatures for June 2026

With both a successful "Forgotten Heroes" event and random drawer challenge under my belt from last month, I thought I'd roll a D12 to see which plastic drawer I'd select a handful of miniatures from for July, and rather surprisingly discovered I'd be painting more of my 32mm scale resin cast Star Trek Adventures Tabletop RPG figures produced by "Modiphius Entertainment". This selection actually comes at a rather opportune time as I was planning to use the miniatures I'd previously pigmented for some games of "Lost Patrol" by "Games Workshop", and only recently realised I was the odd sculpt short of what I needed to field a legitimate landing party.

In addition, having got the enigmatic 'Q' tabletop ready in the past, I thought I should also focus on getting some of the next generation of Federation officers completed as well - quite possibly with the notion of pitting Captain Kirk's crew against that of Jean-Luc Picard's at some future point. Such a move might also make it far easier (and quicker) to get the figures finished as most appear to be wearing the predominantly black colour scheme seen during the Star Trek: The Next Generation movies.

"Death X Tiles" WIPs - Three of nine tiles earmarked for a science fiction boarding zone

Furthermore, for the next three months I thought I'd contribute to Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog by polishing off some of the backlog of terrain pieces I have been religiously producing in "Bambu Lab" PLA (Polylactic Acid) on my A1 Mini 3D Printer. For this opening month I felt I should try to see how much of the Starship Mini Set by "Death X Tiles" I could get done, seeing as I've finally settled upon a simple "Vallejo" Heavy Bluegrey palette for most of the pieces.

To begin with my aim is simply to get a boarding zone completed, which will consist of a 3x3 tile room with a single, open doorway. However, if I can manage to get this quite sizeable area completed within the space of four weeks or less, then I may well start to focus on one of the five much larger rooms I intend my science fiction figures to battle over in future fights. I also have a ton of "Trench Crusade" flavoured scenery by "Saucermen Studios" to crack on with, so may well take a break from the tiles with the odd barricade or bunker.

June 2026 - My Top Five Table has in reality become a rather surprising Top Eight contest

Last month's meagre output certainly saw some surprising congestion strike my most popular manufacturers, with my need to paint at least four models by "Crooked Dice Game Design Studio" helping them to top position - alongside "Wargames Foundry". On top of that my desire to finish off the squad of second-hand Wookie Warriors I rather impulsively purchased whilst in Poole helped the popularity of "Fantasy Flight Games" rival some of my more usual Top Five contenders.

Fortunately, I feel the next four or so weeks will help ease this bottleneck as I'm sure quite a few more miniatures by both "Crooked Dice Game Design Studio" and "Modiphius Entertainment" will be on the cards. What's more I'm really hoping to get going again on a few long paused projects which have simply been sat gathering dust on my hobby table for the best part of the year, such as my "Wargames Foundry" Napoleonics for "Black Powder" and some more "Trench Crusade" warriors by "Trench Stench"...