"Miles Morales’ Spider Powers..."

 "...are significantly different from his counterparts in other dimensions."

This 40mm scale model of Miles Gonzalo Morales was produced by "CoolMiniOrNot", and was released during the company's highly successful February 2020 Kickstarter for "Marvel United" when it achieved a whopping $2,866,168 in funding. Based upon  Brian Michael Bendis and Sara Pichelli's "modern reimagining of the popular character" Spider-Man for "Marvel Comics", the figure can be found inside the boardgame's "Enter The Spider-Verse" expansion set.

"Hailing from an alternate world in which Peter Parker sacrificed his life to protect the city", the figure was primed in "Citadel" Abaddon Black and then had all of the webbing covering his costume (very) patiently picked out with a line of "Vallejo" Heavy Red. In addition, the Afro–Puerto Rican teenager's fingers and chest emblem were also treated to a lick of "Vallejo" Heavy Red, before the entire miniature was given a wash of "Citadel" Nuln Oil.

"During the Crusades, a heretical band of Templars dared defy the Almighty, unleashing the forces of Hell upon the Earth."

Spider-Man's eyes were carefully base-coated with "Two Thin Coats" White Star, shaded in "Citadel" Nuln Oil, and subsequently highlighted back up with (more) White Star by "Two Thin Coats". The model's rubble-strewn base was largely treated to a combination "Vallejo" Heavy Grey and "Citadel" Nuln Oil. Whilst the dislodged drain was pigmented with "Vallejo" Gunmetal, "Citadel" Nuln Oil and Agrax Earthshade.

Alongside Miles Morales, I have also finished working on a second Concrete Defence Wall which was created using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer. Produced by "Saucermen Studios" as part of their "Beyond The Trenches Of Despair" Kickstarter, the scenic piece was undercoated using "Vallejo" Neutral Grey, base layered with a coat of the somewhat darker Sombre Grey and covered in of "Citadel" Nuln Oil.

"Wargames Foundry" WIPs - This Frenchman is close to completion

I then dry-brushed all the concrete with (more) "Vallejo" Sombre Grey, before giving both the numerous spikes and crosses a base-coat of "Vallejo" Heavy Sienna. These areas were later 'picked out' with a little "Vallejo" Gold, and a splash of "Citadel" Agrax Earthshade.

Finally, I am pushing on with a sixth 28mm scale metal model from the “Wargames Foundry" pack FN054 - Light Infantry Chasseurs Advancing. I've got every intention of getting eight of these Napoleonic French skirmishers tabletop ready by the end of the month - if not sooner - as I fully intend to work on some cavalry units by the Newark-based manufacturer for the majority of this year...

"Bah! Everywhere It Is The Same!"

"I live in a world too small for me!"

This 40mm scale model of Benjamin Jacob "Ben" Grimm was produced by "CoolMiniOrNot", and was released during the company's highly successful April 2021 Kickstarter for "Marvel United: X-Men" when it achieved an incredible $5,988,089 in funding. Based upon Stan Lee and Jack Kirby's human mutate for "Marvel Comics", the figure can be found inside the boardgame's "Fantastic Four" expansion set.

Produced in a light blue hard plastic, the Thing was primed using a couple of layers of "Vallejo" Heavy Sienna, washed with "Citadel" Agrax Earthshade, and dry-brushed with (more) "Vallejo" Heavy Sienna. His "flexible, rock-like hide" was then patiently dry-brushed using a little "Vallejo" Heavy Skintone in order to really pick out all of the super-hero's chitinous plates.

"Saucerman Studios" WIPs - This Concrete Defence Wall is almost finished

Admittedly, this didn't make Ben look as orange as he has been depicted in the comic books. However, having previously pigmented a 28mm plastic "Heroclix" model of Aunt Petunia's favourite nephew almost twelve years ago - predominantly using a combination of "Vallejo" Heavy Orange and some rather uncontrollable Umber Shade, I wanted Grimm to look much more earth-coloured on this occasion.

As a penultimate step I applied some "Vallejo" Heavy Blue to the miniature's shorts, shaded this area with "Citadel" Drakenhof Nightshade, and later carefully dry-brushed the clothing with (more) "Vallejo" Heavy Blue. Lastly, I 'picked out' the exceptionally skilled pilot's eyes and mouth with some White Star by "Two Thin Coats", and applied a little "Citadel" Agrax Earthshade to help better show his individual teeth.

"Big Mr Tong" WIPs - These three Power Armoured Troopers have been primed and base-coated

With my latest "CoolMiniOrNot" figure finished, and now ready for some games of the Marvel Multiverse Role-Playing Game, I have also found the time to make some progress on a second, and significantly longer, Concrete Defence Wall by "Saucermen Studios" for my Trench Crusade tabletop. I've actually now produced a few barricades from this set using "Bambu Lab" Matt White PLA (Polylactic Acid) on my A1 Mini 3D Printer, so hope to work my way through them all as the weeks go by.

I've also found the time to upscale five Power Armoured Troopers by "Big Mr Tong" on "Citubox" Basic in order to sate a sudden interest in "Fallout" - which has largely been caused by the PC Game "Call Of Duty: Black Ops 7" currently running an event to tie-in with the American post-apocalyptic drama television series. Created using "Elegoo" Water Washable Resin on a Mars 5 3D Printer, these models are now 42mm in height, so as to match the size of the 'official' Brotherhood of Steel models produced by "Modiphius Entertainment" for "Fallout: Wasteland Warfare"...

(Lead) Mountain Musings - "Partially-Painted/Printed Pledge” [II/IV] January 2026

Last month's output ranged from spacecraft to spacemen, and even a small bit of terrain

Having already completed a quarter of my latest Partially-Painted/Printed Pledge (PPPP) I thought I'd spend the next four or so weeks focusing upon a number of 28mm plastic soldiers produced by "Warlord Games" - which frankly have been gathering dust on my shelves for far too many months. The majority of these figures will be World War Two Italians, as having bought the Nottingham-based company's "Bolt Action" Third Edition rulebook, as well downloaded their Italy Army List [dated September 2024], I thought I might finally finish a force of Benito Mussolini's fascists I've previously assembled, based and undercoated.

In addition, I couldn't resist recently picking up a copy of Issue 454 of "Wargames Illustrated" as it had a sprue of US Firefly Jump Infantry 'cello-taped' to its front cover. In the past I've experimented with "Konflikt '47" using my quite considerably-sized collection of "Secrets Third Reich" miniatures by "West Wind Productions". But never got on with that range's Jet Soldiers - finding the sculpts significantly smaller than the rest of my models. So thought I might try the 'official' figures for a change, and maybe even pick up half-a-dozen Axis Stahltruppen Heavy Infantry as opposition if the mood takes me.

"Warlord Games" WIPs - Three of the six US Firefly Jump Infantry I've assembled for "Konflikt '47"

I'm also eager to continue working on the brood of Zeek Scuttlers by "Artisan Guild" I have produced using "Elegoo" Water Washable Resin on my Mars 5 3D Printer. With my unit of Burrowers now finished and ready to represent a Tidal Swarm for the Trident Realm Of Neritica in "Kings Of War", I plan to get both my army's leader and a couple of basic infantry units completed 'toot sweet.'

Lastly, I haven't forgotten how badly my Napoleonic project has started floundering in recent times. I was fully expecting to have doubled the number of French skirmishers and Russian militia I could field over the past few weeks. However, disappointingly I haven't finished a single one, and now enter a year in which I had planned to solely focus upon cavalry units rather than (more) infantry. As a result I hope to get the eight outstanding soldiers finished as soon as I can, and then potentially look at only doing a handful of horsemen before plunging back to more muskets and bayonets.

"Wargames Foundry" WIPs - This Napoleonic French skirmisher is now close to competition

There can be little doubt that my productivity over the past few months has been somewhat low when compared to my output of previous years. To be fair a lot of this has been down to the sheer variety of miniatures currently available to me - something which has caused me to leap from one manufacturer to another with little rhyme or reason. The number of STL (Standard Triangle Language) files I now own in embarrassingly high and means I now spend a lot of my hobby time tinkering with my 3D printers rather than actually putting a brush-tip on a model.

Somewhat disconcertingly I don't see that changing any time soon either, as I have now started printing and painting scenery too - something I've always tried to avoid in the past. Of particular note has to be the numerous pieces of scenery I just acquired from "Saucermen Studios" via their "Beyond The Trenches Of Despair" Kickstarter. Whether it be ruined walls, trench systems, bunkers, towers or concrete barricades, I am currently slowly producing as much of this stuff as my "Bambu Lab" A1 Mini can cope with - and then I'll be moving onto another terrain project concerning various sewers, dungeons and pyramids following the success of "Death x Tiles: The Lost Temple" campaign by "Cast N Play"...

"An Immersive Set Of Modular Terrain..."

"...For Grimdark Trench Warfare."

This Concrete Defence Wall was created using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer, and was produced by "Saucermen Studios" as part of their "Beyond The Trenches Of Despair" Kickstarter. The smaller of two similarly themed cement-based barricades in the range, it has been printed using a 0.4mm nozzle, with a 0.14mm layer height in order to minimise any striation lines on the finished product.

The model was initially undercoated using "Vallejo" Neutral Grey, and subsequently base layered with a coat of the somewhat darker Sombre Grey. I then applied some "Citadel" Abaddon Black and "Vallejo" Gunmetal over the barricade's reinforced viewpoint, and later sploshed the entire piece of terrain with plenty of "Citadel" Nuln Oil.

"Saucermen Studios" - This Concrete Defence Wall has had all its spikes and emblems coated with "Citadel" Abaddon Black and "Vallejo" Heavy Sienna

I next patiently dry-brushed all the concrete with (more) "Vallejo" Sombre Grey, and the metal plate with (more) Gunmetal. I also applied a few drops of Extreme Rust Wash by "Mig Productions" to the bolts holding the armour sheet in place to hopefully suggest some wear and tear. Lastly, I gave both the spikes and crosses a lick of "Vallejo" Heavy Sienna, before 'picking' them out with a little Gold and "Citadel" Agrax Earthshade.

As I'm now reasonably happy with this palette, I have perhaps unsurprisingly started working on the second, and significantly longer, Concrete Defence Wall which "Saucermen Studios" produce. Like its smaller 'brother-in-arms' this barricade will be free-standing rather than based, and despite its size should prove reasonably straightforward to complete as it doesn't have any steel plates bolted around its windows.

"A transport ship or ferry was a limited role starship."

Lastly, I have completed a second Terran Small Transport vessel by "Fat Dragon Games", which was created using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer. Available as an STL (Standard Triangle Language) file as part of the company's Expansion Set Three for "Battlefront Valkyrie", the spacecraft was printed using a 0.2mm nozzle, with a 0.1mm layer height in order to minimise any striation lines on the finished model.

The miniature was primed using "Citadel" Rakarth Flesh, washed with some slightly watered-down "Citadel" Agrax Earthshade, and dry-brushed with (more) Rakarth Flesh. In addition, I decided to 'pick out' its propulsion unit using a base layer of "Scale 75" White Alchemy and then a splash of "Citadel" Talassar Blue...

"The Bureaucratic Mentality Is The Only Constant In The Universe."

"We'll get a freighter."

This Terran Small Transport vessel is by "Fat Dragon Games", and was created using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer. It can be purchased as an STL (Standard Triangle Language) file as part of the company's Expansion Set Three for "Battlefront Valkyrie", and has been printed using a 0.2mm nozzle, with a 0.1mm layer height in order to minimise any striation lines on the finished model.

Initially I was simply going to use the same "Vallejo" Heavy Bluegrey colour scheme on the tiny freighter as I use on all my (not) Federation starships. However, I thought it might be nice to make the spacecraft stand out a little more from my fleet, so decided upon a double helping of "Citadel" Rakarth Flesh as an undercoat instead.

"Saucermen Studios" WIPs - Having initially primed this Concrete Defence Wall with "Vallejo" Neutral Grey, I've now decided to re-paint it using Sombre Grey instead

The miniature was then washed with some slightly watered-down "Citadel" Agrax Earthshade, and dry-brushed with (more) Rakarth Flesh to help bring out all its details. Finally, its propulsion unit was 'picked out' using my tried and tested combination of "Scale 75" White Alchemy and "Citadel" Talassar Blue.

With so straightforward a paint-job completed, I have managed to find some time to almost finish pigmenting my test piece for some planned games of "Trench Crusade" in 2026. This small Concrete Defence Wall is made by "Saucermen Studios" as part of their "Beyond The Trenches Of Despair" Kickstarter, and is one of several pieces from the range which I've had my A1 Mini busily producing.

"Wizkids" WIPs - Despite some issues the Black Canary is close to completion

As the model is terrain - and they'll doubtless be a fair few pieces littering my tabletop - I am working on a reasonably simple palette which should be fairly quick to apply, but also still look quite effective. Unlike the vast majority of the buildings etc I paint, I am also not planning on basing a lot of these fortifications on plastic or MDF stands, as their footprints would clearly require several bespoke, irregularly-shaped bases to be specially made for them. 

Lastly, I've made a bit more progress on my "Heroclix" miniature of the Black Canary by "Wizkids". To be honest, now my initial enthusiasm for this particular member of the Justice League has subsided, I'm finding her a little tough to keep picking up due to the sheer lack of detail on the sculpt. I'm not sure if it's simply a bad figure, an overly thick pre-paint job, or a combination of both. But it's proving quite difficult to ascertain what parts of poor Dinah Laurel Lance are costume, and what's not...

"All You Have To Do..."

 "...Is stare Death in the face!"

This 28mm scale pre-painted plastic model of Black Mask was produced by “Wizkids” and is miniature number 010 from their DC “Heroclix” Collateral Damage expansion. "Commonly depicted as a brutal and ruthless crime lord in Gotham City who has a fixation with masks", this comic book super-villain was created by Doug Moench and Tom Mandrake, and first appeared in the August 1985 issue of "Batman".

Rather unceremoniously snapped from its 'clicky' base and super-glued onto a plastic 25mm circular base, Roman Sionis was undercoated using plenty of "Citadel" Abaddon Black, before being dry-brushed with "Vallejo" Heavy Charcoal and shaded in "Citadel" Nuln Oil. I then gave his shirt and teeth a little touch of "Two Thin Coats" White Star, and a wash of heavily watered-down "Citadel" Agrax Earthshade.

"Orbiting Earth in the spaceship, I saw how beautiful our planet is."

The mass murderer's partially-destroyed metal walkway was given a lick of "Vallejo" Gunmetal, splashed with "Citadel" Nuln Oil, and dry-brushed with (more) "Vallejo" Gunmetal. As I wanted to suggest the place was falling apart, I also sporadically added some dabs of Extreme Rust Wash by "Mig Productions" to it, and semi-blended these in with (another) dry-brush of "Vallejo" Gunmetal.

I was tempted to add a little colour to the ensemble by following the miniature's original colour scheme and making the ladder red. However, this struck me as being a bit too distracting for my liking, so in the end I simply settled for pigmenting his briefcase with a combination of "Vallejo" Heavy Sienna and "Citadel" Nuln Oil.

"Saucermen Studios" WIPs - This Concrete Defence Wall is having all its details 'picked out'

Moving over to my current obsession with all things 3D printed, I've also completed a pair of 32mm Soviet Cosmonauts by "Black Site Studios". Their STL (Standard Triangle Language) file is from the company's Two-Player Digital Starter Set, and before being predominantly painted in "Two Thin Coats" Sanguine Scarlet and "Citadel" Carroburg Crimson, were both slightly upscaled by 1% due to the original sculpt appearing to be a bit more slender in its proportions than the cast resin Eastern Bloc astronauts I already own.

Lastly, I am continuing to progress a test piece of "Trench Crusade" inspired scenery which I recently produced on my "Bambu Labs" A1 Mini 3D printer. This small Concrete Defence Wall is made by "Saucermen Studios" as part of their "Beyond The Trenches Of Despair" Kickstarter, and is being used as a pilot piece for the colour scheme I plan to use for all my terrain "set in a horrifying alternate timeline of World War One."

"The Larval Stage Of The Scuttler..."

"...Burrowers crawl low on six chitinous limbs, their bodies pressed close to the ground."

This 32mm scale Zeek Burrower is produced by "Artisan Guild", and was created using "Elegoo" Water Washable Resin on a Mars 5 3D Printer. The STL (Standard Triangle Language) file for the figure comes as part of the company's October "Guildhall" subscription release, and represents an immature Zeek Scuttler.

According to their creator Andrea Tarabella these insectoid-shaped creatures are constantly building "a growing mound of stolen treasures" from those who reside within the Scourgelands, and are foolish enough not to protect their property. However, I plan to use them to represent the Trident Realm Of Neritica for "Kings Of War" by "Mantic Games", and have resultantly been pigmenting a trio of these younglings to represent a Tidal Swarm.

"Fat Dragon Games" WIPs - Two small Cargo ships and a Kurgun C3-A Heavy Cruiser  

The figure was therefore super-glued onto a 40mm circular base and primed with plenty of "Vallejo" Heavy Brown. It was then drenched in "Citadel" Agrax Earthshade, dry-brushed with more "Vallejo" Heavy Brown, and dabbed with a little "Citadel" Biel-Tan Green so as to create the illusion of algae sticking to the crab-like creature's limbs and lower carapace. These areas was later blended in with a second dry-brush of "Vallejo" Heavy Brown.

For the creature's top-most carapace I applied a couple of coats of "Vallejo" Heavy Sienna, shaded the chitinous armour in "Citadel" Agrax Earthshade, and dry-brushed it with (more) "Vallejo" Heavy Sienna. The Zeek's eyes were subsequently picked out with a little Skulker Yellow by "Two Thin Coats" and washed with a small amount of "Citadel" Reikland Fleshshade. Finally, the entire model was treated to a heavily watered-down layer of "Citadel" Agrax Earthshade to help smooth down all of the dry-brushing.

"Saucermen Studios" WIPs - One of two Concrete Defence Walls currently being painted

With my KoW Tidal Swarm now two-thirds completed, I had intended to move on to finishing some of the remaining Soviet Cosmonauts I have left over from an impulsive stretch using my "Elegoo" Mars 5 3D printer. Somewhat disconcertingly though I have now developed a real love of producing spaceships and terrain with my "Bambu Labs" A1 Mini 3D printer instead - in particular I have utilised my .2mm nozzle and churned out another Kurgun vessel along with a couple of small cargo craft by "Fat Dragon Games" from their "Battlefront Valkyrie" range.

In addition, with my .4mm hot-end fitted, I've begun merrily manufacturing the first pieces of scenery I recently received from "Saucermen Studios" as part of their "Beyond The Trenches Of Despair" Kickstarter. Clearly aimed at fans of "Trench Crusade", I have printed/primed one of their impressive Concrete Defence walls, with the intention of creating a suitably-sized collection of terrain pieces for some future science fiction battles...