Saturday, 17 July 2021

"The Battle Taxi APC Is Lightly Armoured And Armed…”

“…And ideal for low intensity warfare and urban conditions.”

This 15mm scale Grey Adder APC Battle Taxi Lifter is sold by “Alternative Armies” and can be purchased as Pack Code IAF036G from the company’s "The Ion Age" range. Supplied as a single piece resin vehicle, the “hover” can apparently carry eight troopers and two crew, and is approximately 60mm long, 45mm wide and 25mm tall.

Due to my desire to use the miniature as a proxy for a “Rogue Trader” era Crimson Fists space marine Rhino, I super-glued it to a large-sized plastic "Flames Of War" stand by “Battlefront Miniatures” and primed it using two coats of “Vallejo” Heavy Blue. I then shaded the entire automobile with “Citadel” Nuln Oil. Ordinarily, I would next dry-brush the entire ensemble with (more) “Vallejo” Heavy Blue, however, with my initial (not) Crimson Fists I left the infantry and vehicles alone without highlighting the “Citadel” Shade in order to capture the deep dark blue I’ve always associated with the crusading, fleet-based Adeptus Astartes Chapter.

 "There is only the Emperor!"

I did though depart from my recipe when it came to the Battle Taxi Lifter’s rear door and entry hatch, as “Games Workshop” no longer produce their excellent Bloodletter glaze, so I was forced through necessity to combine a couple of layers of “Vallejo” Heavy Red with some “Citadel” Carroburg Crimson. This blending didn’t really create an exact match for my old colour scheme, but should hopefully be close enough once the models are on the tabletop and viewed from a distance.

As some final steps I coated the vehicle’s air-cushion with a few applications of “Citadel” Abaddon Black, and ‘picked out’ its front mounted Angis 12.5mm AP Gun, its large engines and side vents with a little “Vallejo” Gunmetal and “Citadel” Nuln Oil. I also gave a couple of its details a lick of “Vallejo” White and Pale Grey to suggest they were bulbs of some kind, and attached an old “Games Workshop” Crimson Fists decal onto the miniature’s rear.

"Flames Of War" WIPs - An Officer, a Panzershreck loader and a Panzershcreck operator 

Sticking with 15mm, albeit 'proper' historical stuff, I have been getting the base layers finished some more of the German soldiers from the “Hit The Beach” starter set for “Flames Of War”. I’ve actually finished working on the first half of the Panzergrenadier Company HQ figures, so for a change of pace have predominantly focused my attention upon the four Panzerschreck anti-tank team models which come in the “Battlefront Miniatures” box.

I actually goofed up somewhat in assembling this pair of two-man heavy-weapon units, as I permanently attached them to a couple of three-hole small bases instead of two-hole ones. Luckily, the difference isn’t game-breaking, as it simply means they’re stood further apart from one another than they would normally.

Wednesday, 14 July 2021

“The Nova Is A Versatile Medium OmniMech…”

“…That is capable of acting as a workhorse design in most forces.”

This 1:285 scale plastic model of a Nova is made by “Catalyst Game Labs” and can be bought together with the Executioner, Timber Wolf, Adder, and Grendel in the company’s “Battletech: Clan Invasion” boxed set. All the pre-assembled miniatures in this “supplement to the BattleTech: A Game of Armoured Combat box” come with an assortment of Alpha Strike cards depicting various colour schemes. However, as I plan to employ this particular sculpt as a Dornier class Finnish War Walker for an upcoming Weird War Two campaign using some homemade rules, I decided to go with a predominantly white palette.

“Equipped with a 250 XL Model SF-2 Fusion Engine”, the 34mm tall figure was originally primed using two layers of “Vallejo” German Grey, shaded in “Citadel” Nuln Oil, and dry-brushed using (more) “Vallejo” German Grey with a softly-bristled make-up blusher brush. It was then treated to a watered-down coat of “Citadel” White Scar to replicate the Finnish force’s attempt to provide the mech with some basic camouflage during the Continuation War’s wintry months.

The Axis Forces attempt to hold off a Soviet strike during The Continuation War.

In addition, I wanted to show a lot of wear and tear on the war machine, so started dabbing various edges on the miniature with a piece of torn foam covered in “Vallejo” German Grey. This was actually applied to certain areas using a pair of tweezers, as some of the spaces between the sculpt’s limbs were simply too close together to allow me to reach them whilst holding the foam with my fingers.

I also went back over a lot of the flatter surfaces with some more foam, this time with “Citadel” White Scar on it, to suggest where the Finnish camouflage had firmly remained in place. Once I was content with the overall weathering on the Nova, I applied a combination of “Vallejo” Gunmetal and “Citadel” Nuln Oil to some of its exhaust vents, and the main ‘bolts’ holding its two laser-toting arms in place.

"The Blood Angels were the IX Legion of the original Space Marine Legions under their Primarch Sanguinius."

As a final touch I applied a couple of “Hakaristi”, or hooked crosses, from my collection of “Decal Details” and positioned them onto the model’s shin armour plating. Frustratingly, I wasn’t entirely happy as to how these transfers stood out with their white circles against a predominantly “Vallejo” German Grey background, so in the end dabbed at them a bit with some extra “Citadel” White Scar on a piece of foam. 

Alongside the latest addition to my Axis Weird War Two walkers, I have completed three more 15mm Retained Knights sold by “Alternative Armies”. Available as part of the company’s "The Ion Age" range, I've actually painted these figures up predominantly using “Vallejo” Heavy Red and “Citadel” Carroburg Crimson to proxy some Horus Heresy Blood Angels from the "Warhammer 40K" universe.

Monday, 12 July 2021

“Made From Living Stone…”

“…A Stone Golem Is A Tough Opponent For Any Adventurer!”

This 90mm tall “scale model for ages twelve plus” of a Stone Golem is produced by “Zealot Miniatures” and can be bought from their increasingly extensive Fantasy range. Cast in resin, the figure comes in two separate pieces which can easily be permanently attached with a little pinning and super-glue.

The miniature was initially primed with a double helping of "Vallejo" Heavy Bluegrey, and shaded using plenty of “Citadel” Nuln Oil. I then gave the living statue a thorough dry-brush of (more) “Vallejo” Heavy Bluegrey so as to help really bring out all the cracking sculpt’s wonderful details, such as the intricate runes on its large battle-hammer and the braids in its long, dwarf-like beard.

A pair of adventurers attempt to tackle a stone golem in the Frozen City

In addition, I thought I’d add some weathering to the Golem’s stony surface by applying a little “Citadel” Agrax Earthshade and Biel-Tan Green into many of its deeper crevices and overshadowed areas. These parts were then slowly highlighted back up/blended in with the surrounded stone-work with a particularly patient (second) dry-brush of “Vallejo” Heavy Bluegrey.

With the bulk of the monstrous construct completed, I decided to break-up the somewhat monotone look of the creature by layering its wrist-guards in a combination of “Vallejo” Brass and “Citadel” Nihilakh Oxide. These pieces of armour were then marginally ‘brightened up’ with second dry-brush of (more) “Vallejo” Brass.

"Flames Of War" WIPs - A Panzerfaust, an Officer and an NCO have been base-layered

Lastly, I tackled the notion of giving the Stone Golem some glowing eyes, in order to reinforce its magical-empowerment. I therefore delicately dry-brushed a little “Vallejo” White across the brute’s eyebrows and upper cheeks, before dabbing a dollop onto both of the statue’s actual eyes. I later repeated this exact process using “Vallejo Blue Fluorescent instead.

Alongside finishing the latest addition to my “Frostgrave” tabletop, I have been getting the base layers completed on a number of my 15mm soldiers from the “Hit The Beach” starter set for “Flames Of War” by “Battlefront Miniatures”. I’m currently using the German Formation Command Panzerfaust SMG Team as a test stand, and hope to get the trio’s washes and highlights all done before moving on to one of the platoon’s unit leader and Panzerschreck anti-tank team bases.

Friday, 9 July 2021

“The Phoenix Hawk Quickly Became The standard…”

“…By which all other reconnaissance 'Mechs were measured.”

This 1:285 scale plastic model of a Phoenix Hawk is made by “Catalyst Game Labs” and can be bought together with a Warhammer, Rifeman, and Wasp in the company’s “Battletech: Inner Sphere Battle Lance” boxed set. I have already previously painted one of these sculpts up as a Lockheed-class American War Walker using a predominantly “Vallejo” US Olive Drab and “Citadel” Agrax Earthshade palette.

However, this time round I imagined this particular Weird War Two killing machine might have been manufactured much later in the worldwide conflict, and would thus sport one of the more vibrantly confident colour schemes seen on the American Thunderbolt or Mustang. As a result, the 42mm tall figure was initially primed using two layers of “Vallejo” Silver and shaded in “Citadel” Nuln Oil.

"Battletech" WIPs - The Phoenix Hawk was primed "Vallejo" Silver and shaded in "Citadel" Nuln Oil

I then enthusiastically dry-brushed the heavily-armoured mech with (more) “Vallejo” Silver using a softly-bristled make-up blusher brush, before taking a little “Citadel” Abaddon Black to ‘pick out’ its tiny windows. With the core colour now in place, I turned my attention to working on the figure’s extremities, and started by pigmenting its lower legs were pigmented using a combination of “Vallejo” Heavy Bluegrey and “Citadel” Drakenhof Nightshade.

Besides having this light blue underbelly, quite a few of the American WW2 aeroplanes also seemed to sport plenty of dark blue markings too, so I subsequently applied some old “Citadel” Fenris Grey to the miniature’s outer arms, shoulders and jump jets. These areas were shaded using “Citadel” Nuln Oil and dry-brushed with (more) Fenris Grey.

Two Lockheed-class American War Walkers survey a shell-shocked battlefield

In addition, I decided to replicate the prominent nose of a Mustang by applying some “Vallejo” Heavy Red and “Citadel” Carroburg Crimson to the Phoenix Hawk’s head. Lastly, I treated the right-handed mech’s Harmon Large Laser and jet exhausts to a lick of “Vallejo” Gunmetal and splash of “Citadel” Nuln Oil, before applying several American Star and Stripes transfers by “Decal Details” onto the machine’s shoulder-pads, forearms and lower legs.

Alongside my latest Weird War Two war walker, I have also finished off a few more pieces of terrain for Dave Stone’s Season Of Scenery challenge over on his excellent “Wargames Terrain Workshop” blog. These 6mm resin 6mm Shell holes and Craters are produced by “TimeCast”, and have been super-glued onto some “Citadel” 60mm and 75mm oval bases to designate areas of difficult ground. The features were given an Abaddon Black undercoat, followed by a rough layer of Doombull Brown, a highlight of Rakarth Flesh and finally, a splash Agrax Earthshade wash.

Wednesday, 7 July 2021

“A Sergeant Is An Astartes Non-Commissioned Officer…”

“…Who commands a squad composed of ten Space Marines.”

These four 15mm miniatures are nowadays sold by “Alternative Armies” as part of their "The Ion Age" selection deal IAF008 Retained Knight Post Charlie, and are armed with an assortment of weapons including a Tumbler Mpi Blaster, a pair of Angis Rifles, and a formidably sized Anvil 888 Launcher. Usually formed into Lances of twenty-two men by the Prydian Army, I've actually painted these figures to proxy some Horus Heresy Blood Angels from the "Warhammer 40K" universe as part of last month’s “Forgotten Heroes” challenge.

As a resultant, each pair of metal models was based upon a small-sized plastic "Flames Of War" stand by “Battlefront Miniatures” and undercoated with "Vallejo" Heavy Red. I then heavily washed all of the ‘beaky’ space marines with "Citadel" Carroburg Crimson, before dry-brushing them with (more) "Vallejo" Heavy Red.

"God-Emperor, infuse this weapon with your wrath, that I might deliver your righteous anger unto your enemies."

Each figure's formidable-looking firearm was subsequently layered with "Citadel" Abaddon Black, and later treated to a combination of “Vallejo" Gunmetal and “Citadel” Nuln Oil. I also took a size 000 “Winsor & Newton University Brush Series 233 and placed a small amount of “Citadel” Abaddon Black along the eye-ridge of each miniature’s helmet to provide their visors with the suggestion of shadow.

Due to my wanting to make the unit’s Low Rank Officer figure into something resembling a Blood Angels Sergeant, I also applied some pure “Citadel” Abaddon Black to the miniature’s right fist and back-pack. I did strongly consider also applying this colour to the Retained Knight’s other gauntlet, as well as his shoulder-pads. But in the end thought this might make the diminutive model look a little dark on the tabletop. Besides, I felt the space warrior’s red left hand made his Blaster stand-out better.

"Flames Of War" WIPs - A Panzerfaust, an Officer and an NCO have been dry-brushed and 'black-lined'

Alongside slowly finishing off a handful of “The Ion Age” miniatures I optimistically attempted to paint during the “Forgotten Heroes” challenge, I have also been priming, shading, dry-brushing and ‘black-lining a number of my 15mm soldiers from the “Hit The Beach” starter set for “Flames Of War” by “Battlefront Miniatures”. I’ve now managed to extract both Panzergrenadier platoons from their sprues, as well as the six-figure Panzergrenadier Headquarters unit.

In addition, I have completely assembled the box’s plastic V1 Flying Bomb terrain feature, and am just waiting upon a 160mm x 34mm MDF rectangular base to permanently attach it to so as to ensure it survives ‘contact with the enemy’ on the tabletop. Currently, I’m not planning on tackling the starter set’s three plastic Panzer IV tanks until after I’ve made some significant in-roads on all the infantry first. Plus, I’m still debating whether to fix my tanks upon some large “Battlefront Miniatures” bases, as I’ve previously done with my armoured units in the past…

Monday, 5 July 2021

“The Adder Is Capable Of Carrying A Relatively Heavy Weapons Payload…”

“…That can surprise an unsuspecting enemy, even at extreme ranges.”

This 1:285 scale pre-built plastic model of an Adder is produced by “Catalyst Game Labs” and can be found together with an Executioner, Timber Wolf, Nova, and Grendel in the company’s “Battletech: Clan Invasion” boxed set. All the pre-assembled miniatures in this “supplement to the BattleTech: A Game of Armoured Combat box” come with an assortment of Alpha Strike cards depicting various colour schemes. But as I plan to use this particular sculpt as a Sopwith class British War Walker for an upcoming Weird War Two campaign using some homemade rules, I decided to go with a predominantly light brown palette.

“Codenamed Puma by Inner Sphere forces who first engaged it”, the 33mm tall figure was initially given a double undercoat of “Vallejo” Earth and shaded in “Citadel” Agrax Earthshade. It was then dry-brushed using (more) “Vallejo” Earth with a softly-bristled make-up blusher brush, and had its rather prominent cockpit’s windows ‘picked out’ with a dab of “Citadel” Abaddon Black.

"We shall fight on the beaches."

Originally, my plan for this machine’s colour scheme was to somewhat match that of the two Shadow Cat models I have previously painted as Hawker class British War Walkers. So with that in mind I started to apply a layer of “Vallejo” Heavy Green to the light Clan OmniMech’s legs. However, I soon gave up on this idea as I simply didn’t like the overall look of the contrasting colours in that area, and frankly was finding it devilishly hard to get my brush-tip underneath the squat-looking sculpt’s blocky carapace.

In the end I therefore settled upon simply ‘picking out’ a couple of the Adder’s much more prominently-placed armour plates with a combination of “Vallejo” Heavy Green and “Citadel” Biel-Tan Green. Before applying some “Vallejo” Gunmetal, and later a splattering of “Citadel” Nuln Oil, to the model’s pair of Extended Range (ER) Particle Projector Cannons, some air vents, shoulder-joints, ankle-joints and knee-joints. In addition, I repainted the figure’s nose cone, having felt the “Vallejo” Heavy Red I had initially decided upon made the war machine look too much like Rudolph the Reindeer.

"We shall go on to the end."

Lastly, I dug out three of the smallest Union Flag transfers I could find within my assortment of “Decal Details” and placed them upon the three (Ferro-Fibrous) armour plates I had previously pigmented green. This really made the red, white and blue of the national colours stand out, and gave the small-sized mech a distinctly patriotic feel.

Alongside my latest addition to my ever-growing “Battletech” collection I have also finished the largest (and final) "Bolt Action" Shell Hole produced by “Warlord Games” for this month’s Season Of Scenery Challenge. This dual-crater was super-glued onto an 80mm “Citadel” round base and given an Abaddon Black undercoat, a rough layer of Doombull Brown, a highlight of Rakarth Flesh and finally, a splash Agrax Earthshade wash.

Saturday, 3 July 2021

(Lead) Mountain Musings - "Season Of Scenery" July 2021

"Approximately 40,000 bombs were dropped on Poland's Koźle Basin during World War Two."
This month's effort to diminish my ‘peak of potential’ will be significantly shaped by Dave Stone’s second annual Season of Scenery challenge over on his excellent “Wargames Terrain Workshop” blog. Ordinarily, I’m not the greatest fan of painting terrain, preferring to buy pre-pigmented buildings, walls and rock formations from the likes of “Gale Force Nine”, “Battle Systems” or “Tablescape” whenever possible.

However, I thought I’d use this event to hopefully power through a load of untouched plastic and resin pieces which has been sat upon my hobby table gathering dust for many a year or two. To start with I’ve quickly finished three of the remaining Shell Holes and Craters by “Warlord Games” I originally started working on in September last year.

"Flames Of War" WIPs - A Panzerfaust, an Officer and an NCO have been primed

I’ve previously finished the smallest of this set’s craters to act as an Artillery Barrage marker for "Konflikt '47", so having super-glued the remaining pieces to appropriately-sized “Citadel” round bases and given them an Abaddon Black undercoat, they were treated to a rough layer of Doombull Brown, a highlight of Rakarth Flesh and finally, a splash Agrax Earthshade wash.

In addition, I have gone halves on the “Hit The Beach” starter set for “Flames Of War” by “Battlefront Miniatures” in (yet) another attempt to try wargaming World War Two in 15mm scale. I’ll be tackling the two Panzergrenadier platoons and accompanying Panzer IV tanks for this particular project, and having acquired the recommended “Vallejo” colours for their uniforms, have made a start on my army’s Formation Command Panzerfaust SMG team.

June 2021 - No great change in my favourite manufacturers during the past month

Painting wise, the past four weeks have resulted in the second most productive June I’ve so far achieved. Admittedly, that is arguably hardly difficult as this particular month has historically always proved to be my worst time of the year for hobbying, but considering the significant number of 1:285 scale “Battletech” models by “Catalyst Game Labs” I finished during the period I’m rather pleased with my end result.

Frustratingly, this (6mm) turn out has though rather overtly demonstrated one of the weaknesses in the old “Analogue Hobbies Painting Challenge” scoring system I use for recording my outputs, as despite pigmenting eleven mechs in a single month “Catalyst Game Labs” are simply no-where to be seen on my Top Manufacturer’s Chart. This is due to each model being awarded points dependent upon its scale rather than physical size (or time taken to actually complete). Ordinarily, this tends to even itself out over the course of a year with various tiny or straightforward 28mm figures creating some ‘slack’ for the much larger models I put a brush-tip to. However, for some of the smaller scales it’s a little harder to generate this 'slack', with just two points being the most some of the “Battletech” miniatures can achieve, even though some of them are actually 40mm in height…