Friday, 16 December 2022

"Germany’s Air Force And Navy Could Do Little To Resist Invasion."

"The defence of ‘Fortress Europe’ would therefore fall squarely onto the shoulders of the army."
These four plastic 15mm miniatures are sold by “Battlefront Miniatures” and can be found inside the company’s “Hit The Beach” starter set for “Flames Of War”. The figures consist of a non-commissioned officer (NCO), and three riflemen. Together they form the sixth and final base of MG34 and K98 Rifle teams I require for my second (maximum-strength) German Panzergrenadier Platoon.

As with all my other “FoW” German soldiers, the figures were initially super-glued onto wooden strips, before being primed in “Vallejo” German Fieldgrey WWII, shaded using “Citadel” Nuln Oil, and dry-brushed with (more) “Vallejo” German Fieldgrey WWII. Their details were then ‘picked out’ predominantly using “Vallejo” Heavy Sienna, Gunmetal, Buff, German Camouflage Dark Green, Heavy Brown and a series of “Citadel” Shades.

"Big Mr Tong" WIPs - Three Cybermen and a Sardaukar trooper primed with "Citadel" Abaddon Black

In addition, the Panzergrenadiers' rifle tops, the NCO's submachine gun, and water flask stoppers were given a combination of “Vallejo” Gunmetal and “Citadel” Nuln Oil. Whilst the camouflaged helmet covering was treated to some “Vallejo” Heavy Brown, Luftwaffe Camouflage Green and Heavy Sienna. The headwear was then washed with “Citadel” Agrax Earthshade, before being highlighted back up with (more) “Vallejo” Heavy Brown, of Luftwaffe Camouflage Green and Heavy Sienna.

Alongside my "Flames Of War" project I have also been busy 3D printing, basing and priming a large number of 28mm scale figures for the imminent Thirteenth Analogue Hobbies Painting Challenge. This year I plan to achieve my annual goal of 500-points by simply pigmenting approximately one hundred models, and not become distracted/obsessed by the any of the event's side challenges, so resultantly I've chosen my miniatures with a bit more thought than in the past.

Some of the Warhammer display models for "Middle Earth Strategy Battle Game" and "Warhammer 40K

First and foremost this means that the majority of the sculpts will be pretty straightforward to get finished, predominantly just requiring a shade and subsequent dry-brush over their undercoat. I've also broken the next three months down into weekly targets, with a number of science fiction figures crafted by "Big Mr Tong" being front and centre first in order to see whether my goals are achievable.

In addition, I hope to clear a few half-started projects I still have left lying around my painting table, and recently sought some inspiration as to potential colour schemes by visiting the Warhammer store in Portsmouth. This trip was particularly valuable as it gave me some ideas as to possible palettes for a number of partially-painted Warg Riders I own. I want to field a party of these giant wolves as part of my Isengard Army for the Middle-Earth Strategy Battle Game. Sticking with all things "Games Workshop" I was also impressed with some (dirty) white and red Warhammer 40k scenery I spotted - which got me thinking about the large number of such plastic kits I own that are still on their sprues...

Wednesday, 14 December 2022

"The Destroyer Is Forged From An Unknown And Enchanted Metal."

"The armour was stored away in the Temple of Darkness, but it was found by Loki."

This 40mm scale miniature of Lazer Face was created using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer and is available as an STL (Standard Triangle Language) file by "C27 Studio". The approximately 70mm tall sculpt is clearly inspired by Stan Lee's comic book co-creation - The Destroyer, and designed to be used as an 'alternative' figure for the Marvel Crisis Protocol rule-set.

Along with a 75mm scale version, the model also comes with its own 50mm circular base. However, as I struggle to print anything of that size flat, I decided to simply print out the rubble upon which the "enchanted suit of armor" stands and then superglue it upon an 'official' spare plastic stand by "Atomic Mass Games". I then used some green-stuff to blend the join in, and primed the entire ensemble with "Citadel" Abaddon Black.

Abe Sapien and Hellboy encounter a Sinister Bird, a Frog Swarm and Supernatural Fires

"Forged by the King of the Norse gods, Odin", I decided to use the miniature as an opportunity to test out some of "Duncan Rhodes Two Thin Coats" I've recently been sent by "Trans Atlantis Games" to trial. Resultantly, I applied a single layer of Sir Coates Silver over Lazer Face, shaded it with "Citadel" Nuln Oil, and dry-brushed it with (more) Sir Coates Silver. I later used a similar process for the rubble, swapping out "Duncan Rhodes Two Thin Coats" colour for "Vallejo" Heavy Bluegrey, and adding some splodges of "Citadel" Agrax Earthshade to the mix to dirty the broken ground up a bit more.

With hindsight I should have taken some additional time checking and trimming away a series of 'pimples' left over from the miniature's supports before I started painting the miniature. However, I didn't properly spot them running down the back of the sculpt's legs until later on, by which time I was almost finished and didn't want to have to re-prime. layer, wash, and dry-brush the re-cleaned area - as that always seems to stand out, in my eyes at least, no matter how careful I try to be to blend the repair work in with the original pigmentation.

A Giant Boss Frog Monster tears the B.P.R.D. field agents apart

In addition to completing the first of my figures by "C27 Studio", I have also managed to play some more "Hellboy: The Board Game" by "Mantic Games", unsuccessfully pitting Anung un Rama and Abe Sapien up against a supposedly mild infestation of Frog Monsters. This adventure really didn't go very well at all, with the Deck of Doom placing the two B.P.R.D. Field Agents onto their back feet almost straight from the start.

Alongside the usual hazards of Frog Swarms and "Supernatural Fires", we experienced a Sinister Bird, "A Heavy Moon" (which stunned the duo completely out of the blue", ,"Ambush" and even a super-powered Frog Monster who was invisible to the naked eye. To make matters worse, the monstrous Boss Frog Creature then descended upon us whilst we lay unconscious in a confined space, quickly splattering Abe's brains all over a wall and sending Hellboy flying into an even smaller adjacent room where he was pummelled to death. Next time we'll be sending in a full-team of four operatives...

Monday, 12 December 2022

Top Ten Manufacturers Of 2021 - A "Fantorical" Viewpoint

My increasing interest in 3D printed miniatures and the companies selling them certainly had an impact upon my painting preferences across these twelve months. Admittedly, the likes of "Zealot Miniatures" and "Rocket Pig Games" don't even feature in this list, as I never got around to finishing quite enough of them to warrant it. But their impact, both in financial terms (as they were expensive acquisitions) and as a distraction from other fantasy-focused ranges (e.g. Frostgrave) was arguably quite profound.  

Similarly as transformative was an unexpected, and quite sudden change in attitude to my pre-painted "Heroclix" collection - which somewhat inexplicably died a total death during these twelve months. Instead, I became much more enamoured with historical and science-fiction based wargaming, even going so far as to once again try my hand at fielding enough 15mm plastics for a game of "Flames Of War" by "Battlefront Miniatures"...

No. 10 - "Warlord Games" - "Epic Battles: American Civil War"
There can be little doubt that my enthusiasm for this range of 15mm scale plastic soldiers was incredibly high when they were first announced by “Warlord Games”. Indeed, I even went so far as to scour my local newsagents looking for Issue 393 of "Wargames Illustrated" so as to obtain a free sprue of figures. Sadly however, my plans to field a vast swathe of ragged-looking Confederates for Black Powder soon departed once I realised just how unsuited to my 'black lining' painting technique the strips of ten models were, and just how long it would actually take me to 'pick out' all their straps, hats, beards, water bottles and rifles.

No. 10 - "Mongoose Publishing" - "Judge Dredd Miniatures Game: Block War"
Whilst I have pottered about with this somewhat 'infamous' range of "Kickstarter" funded figures for some years, I was rather surprised to find myself painting quite so many models from it during these twelve months. Much of this productivity was down to my aspiration to replicate the action depicted within the pages of the “2000 A.D." and “Judge Dredd Megazine” comic book crossover event from 1992 entitled “Judgement Day" during "Zomtober". However, it was actually all started by a trip to the LVL Up Gaming Store in Bournemouth a month earlier, where I spent an enjoyable afternoon play-testing some homemade 28mm Judge Dredd rules. 

No. 9 - "Catalyst Game Labs" - "Battletech"
Strangely, despite having never played a tabletop game of "Battletech" I pre-ordered several boxes of these 1:285 scale plastic models just as soon as I saw "Catalyst Game Labs" announce them, and then impatiently waited several months as their release date was repeatedly pushed back. Such situations usually dampen my enthusiasm for a project, but when I did finally get my hands on such sets as the Battletech: Inner Sphere Battle Lance box, I was so energised into crafting a Weird War Two setting where the Axis and Allies fought using giant walkers, that I finished pigmenting over twenty mechs in total.

No. 8 - "Kitbash Games" - "Supers Unlimited"
Having previously dabbled with this range of 28mm scale resin miniatures, courtesy of their creator kindly sending me a couple of characters as a free gift, I suddenly found myself somewhat shockingly preferring to paint these original villains/heroes over my usual mainstay of established "Heroclix" capes and meta-humans. This preference came about because the models matched up so well size-wise with my old “Secrets Of The Third Reich” collection by "Westwind Productions", and resultantly were used to play some skirmish games of Weird War Two at the LVL Up Gaming Store in Bournemouth.

No. 7 - "Atomic Mass Games" - "Marvel Crisis Protocol"
Perhaps one of the biggest disappointments of the year was managing to get a good number of these 40mm scale super-heroes tabletop ready. But not then actually getting a game in. Indeed, one of my main motivators for finishing the likes of Daredevil - who arrived broken and subsequently required some repairs before my project mojo returned - was to complete enough figures to fill out a full roster. Disconcertingly, the rules for this game have now undergone some significant revisions, so many of the cards/statistics which came with the starter set are now out of date and invalid.

No. 6 - "Alternative Armies" - "The Ion Age"
I've always liked the 'beakieness' of the Prydian Army's Retained Knights ever since I first laid eyes upon the 15mm figures, as they remind me of the old "Rogue Trader" era Space Marine from yesteryear. So when the annual “Forgotten Heroes” challenge arrived, I thought it would be a lot of fun to use the sculpts as proxies for Horus Heresy Warhammer 30,000 shenanigans, and started painting up a number of (not) Blood Angels. Admittedly, my deadline for the project slipped quite a bit, but it didn't stop until I had a sizeable number of 'tactical marines', including command and heavy weapons, as well as a couple of vehicles to boot.

No. 5 - "Privateer Press" - "Warcaster"
Due to never really getting on with assembling the multi-part metal miniatures by "Privateer Press" in the past, I wasn't initially completely convinced I wanted to buy any of their 'new' 35mm scale Warcaster: Neo-Mechanika range. However, I soon succumbed when I saw the Iron Star Alliance Squad Starter Set, and rather enjoyed working on all the metallics my colour choice for the 'torchbearers of civilization' contingent contained. Furthermore, the Paladin Annihilators gave me a great excuse to start using “Scalecolor” Cobalt Alchemy.

No. 4 - "North Star Military Figures" - "Frostgrave"
To be completely honest I am not the biggest fan of the sculpting for many of the Frostgrave figures I have ended up pigmenting. I found the look of the White Gorilla, Bear (Rearing To Attack) and Wolves to be both utterly uninspiring, and disconcertingly off-putting when it came to considering putting on an actual game. Yet despite these hurdles, I still managed to build quite the menagerie of creatures and animals for my adventurers to face should they ever once again set foot within the city limits of Felstad's ruins.

No. 3 - "Battlefront Miniatures" - "Flames Of War"
Perhaps I should have realised just how many infantry figures a "Flames Of War" fifty-point force required before buying the “Hit The Beach” Starter Set and getting to work on a German D-Day Defence force, having previously tried to paint up enough soldiers for a British Deserts Rats army. Nonetheless, my enthusiasm for this project not only successfully lead to almost half-a-dozen MG34 and K98 Rifle Teams being tabletop ready, along with accompanying Panzerfaust, Mortar and command bases. But also a couple of small-level games to try out the rules.

No. 2 - "Games Workshop" - "Middle-Earth Strategy Battle Game" and "Epic"
There can be little doubt that a return to Middle-Earth Strategy Battle Game halfway through the year completely rekindled my interest in all things "Games Workshop". The Nottingham-based manufacturer had essentially gone right off my radar for well over a year before I returned to J.R.R. Tolkien's "The Lord Of The Rings", and then later would cause me to enter a 6mm scale plastic painting frenzy with a load of classic "Epic" Space Marines.

No. 1 - "Crooked Dice Game Design Studio" - "Colony 87"
Despite never getting near an actual game of "7TV", "Crooked Dice" were almost twice as popular as their nearest rival, and throughout the year caused me to visit a fair few of my favourite science fiction franchises, such as "The Planet Of The Apes", "Blake's Seven", "Ghostbusters" and "Krull". In addition, the release of some more Alien Pets for their fantastic Colony 87 range had me painting all manner of weird and wonderful extra-terrestrials, alongside a carousel of X-Commandos, Great Apes and even a terrifically-tall resin Treant.

Saturday, 10 December 2022

"So, What Do You Think Got To My Tractor?"

"Something the commies built? Some kind of monster? Something from outer space?"
This 28mm scale Giant Robot is produced by "Crooked Dice Game Design Studio", and can be bought as SKU: MINI 688 from their Science Fiction range. Sculpted by Andrew May, the multi-piece resin kit comes with a choice of two hands (claw or death ray), and stands approximately 90mm in height. Due to my wanting this 'towering war machine' to be fielded alongside my previously-pigmented Killbots and Spybots, it was undercoated with a double helping of "Vallejo" Heavy Grey before being drenched in "Citadel" Biel-Tan Green.

I then applied a dry-brush of "Vallejo" Gunmetal to the entire miniature, making sure to especially 'hit' the edges of its head and numerous rivets, and shaded it further with "Citadel" Agrax Earthshade. To build upon this illusion of the automaton being significantly weathered I later drenched it in "Citadel" Agrax Earthshade and meticulously dabbed each head with a splodge of "Mig Productions" Extreme Rust Wash. Once this time-consuming process was completed, I attempted to blend everything together with a dry-brush of (more) "Vallejo" Heavy Grey.

CC27 Studio WIPs - Lazer Face and Namaste Haiku primed with the "Duncan Rhodes Two Thin Coats" range
This technique was rather patiently done as I wanted to ensure that some of the previously-used "Vallejo" Gunmetal still shone through so as to the pair a slight metallic sheen. Once finished, the Giant Robot's cyclopean eye and chest laser were subsequently spotted with a combination of "Scalecolor" Speed Metal and the "Citadel" Contrast colour Flesh Tearers Red. Finally, I applied some fifteen year old American military decals to the deadly machine, feeling that the transfers rather faded, bleached look would suit a towering droid which was still stalking a post-apocalyptic battlefield.

In addition to the Giant Robot, I have also been busy testing out a number of paints from "Duncan Rhodes Two Thin Coats" range. These were very kindly sent out by Peter Buxton of "Trans Atlantis Games" and, whilst I've only so far tried out a handful of the colours generously posted to me, they have already become my favourite pigments within just a day.

C27 Studio WIPs - Alien Soldier, I Know Kung-Fu, and Duck-tective
I've been using them on some of the 40mm scale STL (Standard Triangle Language) files by "C27 Studio" I've recently created using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer, as I wanted to see how well they covered the super-heroic figures with a single application. Being just a tabletop standard painter I'm always keen to try to 'miss a step' in the painting process by priming my miniatures in their main colour, so this experiment provided me with an opportunity to try out the mainstays White Star and Doom Death Black, as well as Emerald Green and Sir Coates Silver.

The dropper bottles all come with agitators inside of them, so a simple shake of each pot certainly seems to mix up their contents good enough for my uses. Furthermore, I've been pleased with how smooth-flowing each colour's consistency is straight from the nozzle, with only White Star (perhaps unsurprisingly) being a bit 'goopier' than its peers. All of them though have provided me with a solid foundation for future layers, with Sir Coates Silver arguably being the most impressive (over an undercoat of "Citadel" Abaddon Black) and I'm now looking forward to getting some further washes/other pigments from "Duncan Rhodes Two Thin Coats" range onto the models over the next few hobby sessions...

Wednesday, 7 December 2022

3D Printing - Day Five - Trying To Replicate 3D Printing Services

"Splunjohnny" WIPs - Barnabas Collins, a Cyberman and a Judoon
These miniatures were created using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer and are available as unsupported STL (Standard Triangle Language) files from Splunjohnny on "Cults". These sculpts are clearly inspired by various famous television and film franchises and are all created in 100mm scale.

This range is actually one of the main motivators for my purchasing a machine as I had previously been using a 3D Printing Service to produce the models for my tabletop gaming, and up until quite recently I had been extremely happy with their "high resolution" figures. However, much of this satisfaction stemmed from me believing several myths concerning home printing, such as the nauseating smell given off by resin, the nastiness of Isopropyl Alcohol, the financial outlay for a 3D printer, and the enormous effort required to calibrate a device so you can actually achieve a successful print (e.g. exposure settings, curing times and supports).

"Chitubox" Basic easily provides the rafts and supports for all the figures on the build plate
Having invested some hours watching numerous videos on "YouTube" I soon discovered that whilst "Elegoo" Water Washable Resin has a strong, pungent odour, as long as you're wearing a face mask in a well-ventilated area, its effects are minimal. Indeed, my initial thoughts around potentially needing some sort of thermo-nuclear chemical suit swiftly evaporated. Furthermore, there is plenty of advice out there to help a novice get the best from their printer's settings, with "Chitubox" Basic arguably doing the vast percentage of this heavy lifting with just a few clicks of the mouse - at least for me.

Furthermore, despite the definite monetary commitment needed upfront, I quickly realised that no matter how pleased I was with the end result, paying a tenner for each "4k resolution" (plus postage) would quickly add up and surpass the cost of a lower-end 3D printer like the Mars 3 Pro (as well as an "Elegoo" Mercury Plus 2.0 Wash and Curing Machine). True, at the time I also thought I was getting additional value as the service was (in my mind at least) employing some serious time-consuming witchcraft by adding numerous intricate supports to the miniatures and slicing them, as well as reducing their size to 40mm scale.

A size comparison between a 40mm scale 4D Printer Service Terminator (Orange) and mine (Grey)
Disconcertingly however, I have encountered one sticking point since stopping using a 3D printing service, and that has been trying to perfectly match the reduction size they employed whilst shrinking my STL files down from 100mm t0 40mm. Initially, I had simply expected the miniatures to have shrunk by 60%, but that is most definitely not the case.

Indeed, the actual figure appears to be around the 48% mark, with the heights of some previously printed models requiring a little more or less according to my ham-fisted measurements. This difference is debatably not noticeable from a distance on the tabletop, yet it does grate upon my obsessive–compulsive disorder (OCD) somewhat when I want to add reinforcements to already pigmented forces. Resultantly, I might 'ramp up' future prints to the 48.20% bar to see how that pans out...

This posting and many others can now be viewed on the main "Fantorical" website.

Monday, 5 December 2022

"Alright. You Know The Drill."

"We neutralise the threat and bring out Carmack's team."
This 28mm scale model of a Corporate Security Force operative is produced by "Anvil Industry" and can be downloaded for free as part of their Corporate Security Security Force bundle of STL (Standard Triangle Language) files from the "Anvil Digital Forge" "Patreon" subscription service. Consisting of a multi-shelled male body standing to attention armed with a shotgun close to the chest, with standard Regiments neck joint and closed visors male helmeted head, the miniature was produced using "Elegoo" Water Washable Resin on a Mars 3 Pro 3D Printer.

Initally primed using a couple of layers of "Vallejo" Stormy Blue and shaded with "Citadel" Nuln Oil, all of the figure's boots, body armour, firearm and visor were later base-coated with Abaddon Black. The policeman's footwear and protective plates were then dry-brushed with "Vallejo" Heavy Charcoal and shaded with a splash of "Citadel" Nuln Oil.

"They have been attacking the Human Resistance for 600 years."
So as to add some colour to the distinctly dark-looking model, I applied a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil to the operative's shotgun and parts of his helmet. In addition, I used some "Vallejo" Heavy Sienna and "Citadel" Agrax Earthshade on his belt, as well as "Vallejo" Heavy Red and "Citadel" Carroburg Crimson on two large cartridges positioned at the back of the lawman's belt.

To be honest this miniature has been close to being binned a number of times as I've really struggled to find a palette I liked for him. At one point I had actually 'picked out' a number of the model's armour plates in "Vallejo" Gunmetal, "Citadel" Nuln Oil and the Contrast paint Skeleton Horde. But I didn't think this looked right so eventually went with the tried and tested dark blue/black uniform worn by the majority of modern-day Police specialist riot teams.

"Big Mr Tong" WIPs - Three Village Militia primed in "Citadel" Abaddon Black
Alongside the first of several planned Corporate Security Force operatives by "Anvil Industry" I have also completed another 28mm scale metal SpyBot by "Crooked Dice Game Design Studio". This tentacled mechanoid can be bought individually as SKU: MINI 649 or as part of the four-figure deal - DEAL 193.  The single-cast model was predominantly pigmented using "Vallejo" Heavy Grey, "Citadel" Biel-Tan Green, "Vallejo" Gunmetal, "Citadel" Agrax Earthshade and "Mig Productions" Extreme Rust Wash so as to tie them in with my previously painted automatons.

Lastly, I've been busy printing and prepping many of the "Big Mr Tong". miniatures I want to get tabletop ready during the forthcoming Thirteenth Analogue Hobbies Painting Challenge (AHPC). As I plan on ignoring all the event's side-quests this time around, I plan to work on several of the prolific sculptor's ten-figure ranges, including a wonderful troop of Village Militia who remind me of Terry Pratchett's Ankh-Morpork City Watch...

This posting and many others can now be viewed on the main "Fantorical" website.

Thursday, 1 December 2022

(Lead) Mountain Musings - "Analogue Hobbies Painting Challenge” December 2022

"Shortly after the Interex campaign the Luna Wolves became the Sons of Horus."

This month's optimistic intention to reduce my ‘peak of potential’ will be marvellously molded by Curt Campbell’s Thirteenth Annual Analogue Hobbies Painting Challenge (AHPC), or rather my mad dash to clear my painting desk before the event starts on December 21st. First up will be the remaining Sons of Horus space marines I need to finish so I can field a 500-points traitor legion for "The Horus Heresy" by "Games Workshop".

Fortunately, I've already built, painted and even flocked a large proportion of these multi-part plastic figures. But over the next few weeks I still need to quite heavily focus upon the thirty-one-model force's third tactical contingent comprising of ten Blackshields - warriors who have entirely denounced their parent Legion,

"Big Mr Tong" WIPs - A Sardaukar, Cyberman, member of the Village Militia and Dalek

To mix things up, I'm using several old "Forge World" resin kits I've had lying around since I last visited the Nottingham-based dedicated specialist's booth at "Salute" several years ago, alongside the pieces found inside the Warhammer: The Horus Heresy – Age of Darkness boxed set. So, each member of this pariah formation will contain elements taken from various armour variants (e.g. helmets, insignia-marked shoulder-pads etc), as well as extra equipment and weaponry.

In conjunction with this aim, I'll also be prepping many of the numerous miniatures I want to pigment during the forthcoming AHPC. I'm actually planning on ignoring all its side-quests this year, and simply focusing on completing approximately one hundred 28mm figures instead. A good portion of these models will be 3D printed sculpts taken from my "Patreon" subscription of "Big Mr Tong". But I also have plans for a contingent of Golemmar Gnomes by "Artisan Guild", which I hope to use (as Halflings) for "One Page Rules" Age Of Fantasy: Skirmish ruleset.

November 2022 - A renewed interest in "Doctor Who" has seen "Warlord Games" gain some ground

As far as the past four weeks' progress is concerned, I have enjoyed my most productive November since I first started recording my output some nine years ago. Indeed, I’ve now almost painted as much during the past eleven months as I did the entirety of last year. Much of this success has undoubtedly been due to my fascination with 3D printing the 28mm figures of “Big Mr Tong”. But I’ve also surprisingly rekindled my interest in the “Doctor Who” range of metal miniatures produced by “Warlord Games” due to the Nottingham-based manufacturer announcing the line’s imminent end, and resultantly offering a myriad of free exclusive models whenever an online order attains a certain price point.

With the AHPC starting in approximately three weeks’ time I have little doubt that even more science fiction sculpts by “Big Mr Tong” will be ready for the tabletop, and hopefully they should be accompanied by an equally impressive number of “Games Workshop” Sons of Horus Space Marines for “The Horus Heresy”, as well as the remaining 15mm “Battlefront Miniatures” German Panzergrenadiers I need to complete for my “Flames Of War” force. I am though, still busy perusing all the fascinating miniatures available via the various companies on “Patreon”, so wouldn’t be at all surprised if another one of those didn’t suddenly catch my eye…

This posting and many others can now be viewed on the main "Fantorical" website.