"Miles Morales’ Spider Powers..."

 "...are significantly different from his counterparts in other dimensions."

This 40mm scale model of Miles Gonzalo Morales was produced by "CoolMiniOrNot", and was released during the company's highly successful February 2020 Kickstarter for "Marvel United" when it achieved a whopping $2,866,168 in funding. Based upon  Brian Michael Bendis and Sara Pichelli's "modern reimagining of the popular character" Spider-Man for "Marvel Comics", the figure can be found inside the boardgame's "Enter The Spider-Verse" expansion set.

"Hailing from an alternate world in which Peter Parker sacrificed his life to protect the city", the figure was primed in "Citadel" Abaddon Black and then had all of the webbing covering his costume (very) patiently picked out with a line of "Vallejo" Heavy Red. In addition, the Afro–Puerto Rican teenager's fingers and chest emblem were also treated to a lick of "Vallejo" Heavy Red, before the entire miniature was given a wash of "Citadel" Nuln Oil.

"During the Crusades, a heretical band of Templars dared defy the Almighty, unleashing the forces of Hell upon the Earth."

Spider-Man's eyes were carefully base-coated with "Two Thin Coats" White Star, shaded in "Citadel" Nuln Oil, and subsequently highlighted back up with (more) White Star by "Two Thin Coats". The model's rubble-strewn base was largely treated to a combination "Vallejo" Heavy Grey and "Citadel" Nuln Oil. Whilst the dislodged drain was pigmented with "Vallejo" Gunmetal, "Citadel" Nuln Oil and Agrax Earthshade.

Alongside Miles Morales, I have also finished working on a second Concrete Defence Wall which was created using some "Bambu Lab" Matt White PLA (Polylactic Acid) on an A1 Mini 3D Printer. Produced by "Saucermen Studios" as part of their "Beyond The Trenches Of Despair" Kickstarter, the scenic piece was undercoated using "Vallejo" Neutral Grey, base layered with a coat of the somewhat darker Sombre Grey and covered in of "Citadel" Nuln Oil.

"Wargames Foundry" WIPs - This Frenchman is close to completion

I then dry-brushed all the concrete with (more) "Vallejo" Sombre Grey, before giving both the numerous spikes and crosses a base-coat of "Vallejo" Heavy Sienna. These areas were later 'picked out' with a little "Vallejo" Gold, and a splash of "Citadel" Agrax Earthshade.

Finally, I am pushing on with a sixth 28mm scale metal model from the “Wargames Foundry" pack FN054 - Light Infantry Chasseurs Advancing. I've got every intention of getting eight of these Napoleonic French skirmishers tabletop ready by the end of the month - if not sooner - as I fully intend to work on some cavalry units by the Newark-based manufacturer for the majority of this year...