(Lead) Mountain Musings - "Crooked Dice" October 2026

Science Fiction figures once again completely dominated my past month's output

Things have definitely been somewhat off-target painting-wise over the past few months, so rather than try to focus upon a somewhat ad hoc collection of Undead/Survivor themed miniatures for the annual "Zomtober" challenge during October, I thought things might be a bit more productive if I once again simply concentrated upon my backlog of a single, individual company. Of course, where I can I do plan to pigment a grisly ghoul, ghost or zombie, but considering just how badly the last four weeks' output turned out to be, I think I'd rather apply my paintbrush to some figures which inspire me to get them tabletop ready rather than aimlessly 'flit' around my lead mountain looking for something to tie in to a specific event.

Such a decision will hopefully allow me to get enough models varnished and flocked in time for some games of "Adventures in Time & Television" before the end of the year - a self-made solo/co-operative ruleset based upon my M.I.S.S. system. I've recently had to update the core of these homebrew rules to accommodate some of the 15mm figures/vehicles I have completed from "Alternative Armies" The Ion Age range, so bringing them up to speed for 28mm battles shouldn't prove too difficult.

"Crooked Dice Game Design Studio" WIPs - Three of the four Alien Legionnaries I've recently found

Resultantly, I plan to predominantly work on a number of sculpts produced by "Crooked Dice Game Design Studio" in order to obtain a better understanding of what I need pick up from the manufacturer's stall whilst visiting the fairly imminent Wargames Association of Reading (WAR) annual wargames show Warfare. Initially, this'll focus upon more of Karl Perrotton's Alien Legionnaries, which will form the 'bulk' of the opposition for my game - and four of which I unexpectedly stumbled upon whilst having a bit of a rummage through my 'pile of potential'.

I have though also got my eye on some Nautican Warriors I recently purchased, which will give the 'randomly generated' villains a totally different aspect should they enter the contest. I am already working on a pilot piece for this evil underwater race, and will probably pick up their leader, Emporer Poseidus, along with a couple more packs of Nauticans when I attend the aforementioned show in the middle of November.

September 2026 - Crooked Dice Game Design Studio continues to extend their lead in my Top Five Manufacturers

By far the biggest disappointment of September was failing to even get the four Systemic Security miniatures by "Beast In The Broch" finished. Admittedly, the remaining two figures are reasonably close to completion. Yet I am now far behind working on the set's two leading characters: Alpha One (standing) and Alpha Two (advancing), and have vowed not to order the company's latest releases - along with another load of System Security units, until I have them done too.

My fingers are most definitely crossed regarding my output over the next few weeks, as not only do I already have a load more 15mm "Alternative Armies" infantry en route, including enough Retained Knights to significantly 'fill out' my (not) Dark Angels contingent. But I am also awaiting many of the latest Submarine Crew sculpts from "Crooked Dice Game Design Studio". However, I do feel as if I will need to get a few actual games in to help maintain my hobby mojo as the shorter days start to draw in...

"Do Not Fail The Empire."

"Operative, I have apportioned some experimental Dark Troopers to Tatooine for evaluation."

This 40mm scale model of a Phase-III Dark Trooper is produced by "Atomic Mass Games", and comes as part of the company's "Star Wars: Shatterpoint You Have Something I Want Squad Pack". Based upon "the last and most powerful dark trooper exoskeleton/droid", the exasperating sixteen-piece plastic miniature was eventually assembled using the instructions found on the Minnesota-based manufacturer's website, and glued to one of the tabletop game's 40mm circular bases.

However, due to one of the halves of the machine's left shoulder-pad tearing into two parts whilst I was cutting it from the sprue, this over-complicated 'nightmare' actually ended up taking just as long to put together as the first of Moff Gideon's minions I recently got tabletop ready. Indeed, I ended up having to (plastic) glue to the two damaged pieces together and subsequently file them down as flat as I could before I could properly continue with the rest of the Dark Trooper, and even then there's a very visible dent in the robot's shoulder if you know where to look.

"Beast In The Broch" WIPs - The three remaining Systemic Units

The Imperial droid was originally primed using "Citadel" Abaddon Black and later base-layered with "Vallejo" Glossy Black - which I hoped would do much of the heavy lifting when it comes to how the shiny black killer would appear. To break the overwhelming all-black palette though, I did 'pick out' all the figure's elbow, wrist, knee and elbow joints using a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil, as well as it's E-450 "Arc Hammer" heavy blaster rifle. Finally I used a little "Vallejo" Heavy Red, "Citadel" Carroburg Crimson, and "Vallejo" Dark Vermillion for the Dark Trooper's eyes and chest computer.

In addition to this disappointingly time-consuming project, I have continued to plug away at the three remaining Systemic Security models found inside the Systemic Units set by "Beast In The Broch". Due to still being rather taken by Terry Nation's cult "Blake's 7" science fiction television show, I should still be able to get the computer-controlled lackeys completed before the month's end. Albeit, I sadly doubt I'll have the time to pigment the set's Alpha One and Alpha Two as well.

"Wargames Foundry" WIPs - The OOP figure of Venus Bluegenes

Despite recently listening to some of the "2000 AD" full-cast audio of "Rogue Trooper: Welcome to Nu Earth" over on "Audible", I've still been rather struggling to truly get going with my restarted Rogue Trooper project of late - and not even the chance discovery of my previously purchased five Man E-Corp Unit by "Diehard Miniatures" to use as (not) Southerners. Resultantly, I felt it prudent to set aside Tim Prow's dynamically sculpted Krupps Corp unit blister models (which I was planning to use as Norts), and look elsewhere for inspiration.

Funnily enough, such a mojo maker soon presented itself in the guise of the now long OOP (Out Of Production) figure of Venus Bluegenes by "Wargames Foundry". Now ordinarily I don't like to mix my manufacturers for projects. But when I slapped the "so-called G.I. Doll" on a lipped base besides my aforementioned "Diehard Miniatures", the sculpt appeared to be similarly proportioned overall and only a touch taller - which arguably makes sense for a one woman killing machine who was a "genetically-modified warrior". Regardless, I've found my interest in the project reignited and now hope to get the "female clone soldier created by Milli-Com" finished 'toot sweet'...

"But This Is A Fine Time To Test..."

 "...My newly acquired weapons."

This 140mm tall Inner Core was created using some "Bambu Lab" PLA (Polylactic Acid) on my A1 Mini 3D Printer and can be downloaded for free as part of the Sturmriese Axis Walker by "Warlord Games". Designed to be just one piece of the colossal-sized "Konlikt '47" death machine, I decided it would instead look rather good as an energy pylon on my "Marvel Multiverse Role-Playing Game" tabletop.

However, the original 3D print did look a little too bare for my liking so I thought I'd add some textured details to the scenic piece via some of the many decals gifted to me by “N-FX Game Design Studio” several years ago. These 'stickers' were sporadically placed here and there - most notably around the transmission tower's lower base in an effort to show that the invention had been occasionally updated and required plenty of air vents for its internal cooling mechanism.

"Beast In The Broch" WIPs - A trio of models from inside their Systemic Units set.

The entire ensemble was subsequently undercoated using a couple of layers of "Vallejo" Gunmetal Blue, almost drowned in "Citadel" Nuln Oil and dry-brushed with (more) "Vallejo" Gunmetal Blue. The pylon's dome was then treated to a lick of "Vallejo" Gunmetal, shaded with "Citadel" Nuln Oil and subsequently dry-brushed with (more) "Vallejo" Gunmetal. In fact, I actually ended up giving the entire 3D a very light dry-brush of "Vallejo" Gunmetal to help better highlight all its edges and features.

I next settled down to the task of patiently colouring many of its vents and details using a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil. I really didn't need everything to contrast as I'm big believer in scenery predominantly sitting in the background of a game, and resultantly I didn't bother varnishing the 'Inner Core' either - so it would hopefully blend in better with some of the other pre-painted pieces I own.

"Atomic Mass Games" WIPs - This Dark Trooper has been assembled, primed and base-coated

With the first of my entries completed for Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog, I have begun pigmenting some of the figures found in the Systemic Units set by "Beast In The Broch". I'm hoping their predominantly black and silver colour scheme will mean they're pretty straightforward to get tabletop ready, so am currently just focusing on three of alien computer network's humanoid minions first.

In addition, after battling to (plastic) glue together another 40mm scale Phase-III Dark Trooper by "Atomic Mass Games", I'm delightfully in a position where I just need to paint the "Star Wars: Shatterpoint" multi-part droid. My difficulties in assembling these monstrosities is really starting to eat away at my enthusiasm for the models. But in an effort to maintain my interest in George Lucas' galaxy (far, far away), I have now dusted off a few "Star Wars: Legion" miniatures to add to my hobby queue...

(Lead) Mountain Musings - "Beast In The Broch" September 2026

Science Fiction figures dominated August's output

Due to something of an upturn in my productivity last month - predominantly due to a week working on a trio of "Blake's Seven" inspired sculpts from "Beast In The Broch", I thought I should probably maintain my focus for the next four weeks upon "the tentacled lovechild of games designer Graeme Dawson" as opposed to 'flitting off' after another range or three. Resultantly, I hope to paint the entire contents of the company's Systemic Units set throughout September and then be in a position to add some additional black-suited Systemic Security models to my next order with them.

In addition, I aim to finally finish off the first of my entries to Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog, and follow that up with a couple of other pieces I've 3D printed from the free Fallout: Wasteland Warfare - Print at Home - STL (Standard Triangle Language) Sampler Set released by "Modiphius Entertainment". These generators aren't anywhere near as large as the "Warlord Games" Sturmriese Axis Walker piece I'm currently working on. But should still be good for my upcoming games of Matt Forbeck's Marvel Multiverse Role-Playing Game.

"Beast In The Broch" WIPs - Three of the models found inside their Systemic Units set.

I also haven't forgotten about 'slogging through' the rest of the 40mm scale multi-piece miniatures found inside the box of "Star Wars: Shatterpoint You Have Something I Want Squad Pack" I recently purchased. Admittedly these "Atomic Mass Games" sculpts are proving a bit of a time-consuming nightmare to assemble. Yet once (plastic) glued together, I believe they should be pretty-quick to polish off due to their largely black-coloured palette - especially the remaining Phase-III Dark Trooper and accompanying Death Trooper Escort.

Lastly, despite already owning a mini-mountain of untouched figures by "Crooked Dice Game Design Studio", I have got some additional 'reinforcements' coming in following their latest release of heinous Temporal Travellers. Rather embarrassingly, I couldn't actually say which of the models from this range I don't own, due to my collection being stored away in a rather haphazard manner. However, as I'm currently watching at least one episode of classic "Doctor Who" daily, I'm hoping my enthusiasm for all things "timey wimey" will spur me on to getting a fair few of this backlog completed before the year is done.

August 2026 - Crooked Dice Game Design Studio extends their lead in my Top Five Manufacturers

As aforementioned, I owe a significant debt to "Beast In The Broch" for helping me shrug off a serious 'funk' before August came to a close. Indeed, without the manufacturer's marvellous FedSec Command 2 Set I'd almost certainly be looking at an output which frighteningly would have been even less than the dismal showing seen in July. Happily though, that situation was soon averted, and along with a couple more Beastmen 3 by "Crooked Dice Game Design Studio" I was able to attain a much more acceptable tally.

Whether my excitement for the six figures found inside Graeme's Systemic Units set will have a similar effect upon my mojo remains to be seen. But I do have a fair few partially-painted projects sat lurking around my hobby desk presently - in which case any one of them may well be 'picked up' upon a whim and finished within the span of a dedicated session or two, including a number of "Star Trek" and "Judge Dredd" miniatures I still need to complete from my momentarily postponed randomly selected plastic drawer challenge...

"You're About To Face Off With The Dark Troopers."

"You had your hands full with one."

This 40mm scale model of a Phase-III Dark Trooper is produced by "Atomic Mass Games", and comes as part of the company's "Star Wars: Shatterpoint You Have Something I Want Squad Pack". Based upon the "elite, experimental third-generation battle droid manufactured by the Imperial Department of Military Research", the infuriatingly overcomplicated sixteen-piece plastic miniature was eventually assembled using the instructions found on the Minnesota-based manufacturer's website, and glued to one of the tabletop game's 40mm circular bases.

To be honest, this figure actually seemed to take longer to (plastic) glue together than it did to paint, and on several occasions was close to being shelved when one of its tiny parts inadvertently slipped from my grasp and ended up temporarily lost on my floor. Just why the sculpt needed to be so 'over-designed' I have no idea. But all my enthusiasm for the remaining three Imperial infantry units found inside the box has been almost irretrievably destroyed.

"Beast In The Broch" WIPs - These two FedSec Commanders are almost finished

"The black and silver-plated droid" was initially primed using "Citadel" Abaddon Black and subsequently base-layered with "Vallejo" Glossy Black. I did momentarily toy with the idea of giving the model a delicate dry-brush of "Vallejo" Heavy Charcoal too - in an attempt to highlight the miniature. However, in the end I thought the oils and greases caused by my handling of the Dark Trooper tabletop would, over time, also provide a suitable effect.

To break the overwhelming all-black palette though, I decided to 'pick out' all the figure's elbow, wrist, knee and elbow joints using a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil, as well as the robot's E-450 "Arc Hammer" heavy blaster rifle. Finally I used a little "Vallejo" Heavy Red, "Citadel" Carroburg Crimson, and "Vallejo" Dark Vermillion for the deadly droid's eyes and chest computer.

"Warlord Games" WIPs - This scenic piece has been primed, shaded and dry-brushed

Alongside this surprisingly time-consuming project, I have also continued plugging away at the two remaining officers from the FedSec Command 2 set by "Beast In The Broch". As I'm currently in something of a major "Blake's 7" mood I was actually hoping to make a start on the company's Systemic Units set this month too. Yet now I find myself needing to really focus just upon these (not) Federation officers if I'm going to get the trio finished before August is done.

Lastly, I've managed to get some basic layers of paint upon my first entry into Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog. This 3D printed part from the "Warlord Games" Sturmriese Axis Walker was meant to be used for "Konlikt '47". But instead I'm aiming on using it as an energy pylon for some games of Matt Forbeck's Marvel Multiverse Role-Playing Game...

"Ready Launchers Three And Seventeen."

"Fire."

This 28mm scale lead free pewter model of FedSec Base Commander is manufactured by "Beast In The Broch" and can be brought either individually as SKU: FED18 or as part of the five-figure FedSec Command 2 set SKU: PAK08. Digitally sculpted by Carl Stoelzel, the miniature is clearly inspired by the one-eyed Quute as played by actor Christopher Neame in the 1981 television episode of "Blake's Seven" entitled "Traitor".

"A colonel in the Federation force on Helotrix", the senior officer was primed using a couple of coats of "Citadel" Abaddon Black, heavily dry-brushed with "Vallejo" Heavy Charcoal, and shaded using plenty of "Citadel" Nuln Oil. I then picked out all his uniform's rather lavish rank insignia using a combination of "Vallejo" Gunmetal and (more) "Citadel" Nuln Oil.

"Warlord Games" WIPs - This piece of Sturmriese Axis Walker has had several stickers added to it

Ordinarily I would also use these colours to 'pick out' the Federation's standard issue carbine. However, as I wanted to make a break from all the black and silver already on show, I decided to pigment the hand-weapon using a basecoat of "Scale 75" Decayed Metal and subsequently wash it with "Citadel" Agrax Earthshade. This seemed to be a much better match for the on-screen colour scheme too.

With the first of my FedSec Command Team completed, I have once again turned my attention to Dave Stone's Season of Scenery over on his "Wargames Terrain Workshop" blog, and started work on a rather large piece of a Sturmriese Axis Walker for "Konlikt '47" I printed using some "Bambu Lab" PLA (Polylactic Acid) on my A1 Mini 3D Printer many moons ago. The "Warlord Games" STL (Standard Triangle Language) is just piece of a rather complicated looking "colossal Rift-tech construct" and frankly put me right off producing any more parts. But I did think it looked rather good as some sort of energy pylon.

"Atomic Mass Games" WIPs - This Dark Trooper has been assembled, primed and base-coated

Indeed, my recent purchase of the "Secret Wars" expansion book for the "Marvel Multiverse Role-Playing Game" has put me in need of just such an objective/scenic piece, so I thought now was the ideal time to get it painted. However, it did (understandably) look a little bare for my purposes, so I dipped into my slowly-dwindling collection of 3D decals given to me by “N-FX Game Design Studio”, and 'spruced' it up a bit first.

In addition, I've been battling the first of two Dark Troopers I recently bought as part of the You Have Something I Want Squad Pack for "Star Wars: Shatterpoint". This 40mm scale multipart plastic Imperial super-soldier by "Atomic Mass Games" took forever to assemble due to its overcomplicated design and incredibly fiddly small parts - the number of times I had to hunt around the floor on my knees looking for a tiny piece I'd dropped whilst trying to glue it to a similarly-sized part almost fried my poor brain. Luckily though, I have managed to persevere and finally get the first of the box's four figures ready for some paint...

"King T'Challa Is The Black Panther."

"A sacred title that must be both inherited & earned by the current Wakandan ruler."

This 40mm scale model of the Black Panther is made by "CoolMiniOrNot", and was unlocked during the company's highly successful February 2020 Kickstarter for "Marvel United" when it achieved a whopping $2,866,168 in funding. Based upon Stan Lee and Jack Kirby's "protector of the fictional African nation of Wakanda" for "Marvel Comics", the figure can be found inside the boardgame's Season One expansion box entitled "Rise Of The Black Panther".

Produced in a light blue hard plastic, this particular incarnation of King T'Challa appears to be have sculpted by the "Bigchild Creatives" team to be similar in appearance to the character's cinematic outings rather than his comic book adventures, and this caused me a few headaches when deciding what colour to paint the incredibly frustrating vibranium bands encircling most of the super-hero's body. I really wasn't a fan of the almost luminescent purple hoop paint-jobs I saw, nor the dull grey ones.

"CoolMiniOrNot" WIPs - Some of the final stages painting the Black Panther

In the end I therefore decided to go with a metallic silver look which also seemed to be quite popular with my fellow painters, and also tied in quite nicely with Black Panther's appearance in the Russo brother's 2016 movie "Captain America: Civil War". Resultantly, I primed the miniature with "Citadel" Abaddon Black, and then dry-brushed it with "Vallejo" Gunmetal - so as to help me see all the cords, circles and swirls. Sadly, this didn't really work out as I'd hoped, as some of the vibranium simply seemed to blend back into the legs as if the sculptor didn't know where it actually ended, and also there were a few nasty-looking casting flaws on the figure which would need careful navigating/hiding.

These issues caused me to carefully apply a couple of layers of "Citadel" Abaddon Black in between all the vibranium, and highlight the "rare metal" with a line of "Vallejo" Gunmetal and splash of "Citadel" Nuln Oil. However, as I wanted T'Challa's necklace to especially standout, I ensured this area was much more strongly coated in "Vallejo" Gunmetal, before applying some "Citadel" Nuln Oil to it. Finally, I carefully 'picked out' the claws with a combination of "Two Thin Coats" White Star and "Citadel" Agrax Earthshade.

"Atomic Mass Games" WIPs - Jango Fett's base has been base-layered, shaded and dry-brushed 

With the Black Panther finished, I have found the time to make some more progress on my plan to paint several 40mm "Star Wars: Shatterpoint" plastic models. As with my previously completed Count Dooku miniature by "Atomic Mass Games", this Jango Fett figure comes from the skirmish game's Twice the Pride Squad Pack. However, along with a Magnaguard, its assembly using the unhelpful instructions on the manufacturer's website, actually put me off the entire hobby for a few days.

Indeed, those with sharp-eyes may well spot that the Mandalorian bounty hunter isn't standing as he should be upon the piece of scrap metal glued to his base. This is because I was actually going to use the base for a Magnaguard I put together, as the incredibly frustrating multi-part combat droid appeared to be so fragile that I was going to use the terrain piece to bolster its connectivity to its stand. In the end though, I changed my mind. But by then the debris was firmly fixed in place, so I couldn't match up Fett's foot with the hollow designed for him to stand in...

"I Sense Great Fear In You, Skywalker."

"You have hate. You have anger. But you don't use them."

This 40mm scale model of Count Dooku is produced by "Atomic Mass Games", and comes as part of the company's "Star Wars: Shatterpoint Twice the Pride Squad Pack". Based upon the physical likeness of the late, great Sir Christopher Lee, the eight-piece miniature was assembled using the instructions found on the Minnesota-based manufacturer's website, and glued to one of the tabletop game's 40mm circular bases.

The "sinister Sith Lord" was first undercoated with a couple of layers of "Citadel" Abaddon Black, before having his trousers pigmented using a combination of "Vallejo" Heavy Brown and "Citadel" Nuln Oil. I then 'picked out' his belt and cloak with some "Vallejo" Heavy Sienna, and doused the two areas with plenty of "Citadel" Agrax Earthshade.

"CoolMiniOrNot" WIPs - Korg's base layers have now all been applied

I applied a little smidgeon of "Vallejo" Gunmetal and "Citadel" Nuln Oil to the once a respected Jedi Knight's lightsabre, and carefully (because it feels as fragile as anything) drew some "Vallejo" Heavy Red along its plasma blade. This particular part was later shaded in "Citadel" Carroburg Crimson and delicately dry-brushed with a little (more) "Vallejo" Heavy Red.

I also gave the hair and beard of Grand Master Yoda's former padawan a touch of "Two Thin Coats" White Star and a lick of "Citadel" Nuln Oil. As I wanted to try to capture Darth Tyranus' whiskers, I subsequently went back and dabbed at the sculpt's detail with (more) White Star by "Two Thin Coats". Finally, I gave Count Dooku's cape a thorough dry-brush of "Vallejo" Heavy Sienna in order to add some shade in its folds.

"Crooked Dice Game Design Studio" WIPs - This Galactic Explorer is almost finished

With the first of eight planned "Star War: Shatterpoint" figures I have purchased finished, I have continued with my cunning plan to paint a number of Marvel United gaming pieces to use with the Marvel Multiverse RPG (MMRPG). My hobby desk is currently absolutely swamped with these Chibi-like 40mm plastic models by "CoolMiniOrNot". So to try and keep sane I am just focusing upon the Kronan gladiator Korg, who is encountered at the start of the MMRPG's Escape From Planet Hulk starter scenario.

In addition, I have found a few moments to potter away at one of the Galactic Explorers I quite recently purchased from "Crooked Dice Game Design Studio". I admittedly picked this particular (not "Galaxy Quest") figure as something different from all the larger-scaled stuff I'm presently focused upon, so I'm not really sure when I'll finally get the fellow tabletop ready...

"Information About Doop's Origins..."

"...As with anything else about him, is difficult to verify."

This 40mm scale model of Doop is manufactured by "CoolMiniOrNot", and was unlocked during the company's highly successful April 2021 Kickstarter for "Marvel United: X-Men" when it achieved an incredible $5,988,089 in funding. Created by Peter Milligan and Mike Allred, "everyone's favourite talking blob" (and his hero cards) can be found in the boardgame's Season Two Promo Box.

Produced in a light blue hard plastic, the X-Force's official videographer was primed using a mixture of "Citadel" Abaddon Black and Ethereal Green by "Two Thin Coats". The artificial being's rubble-strewn base was then layered in "Vallejo" Heavy Bluegrey, shaded with "Citadel" Nuln Oil, and finally dry-brushed with (more) "Vallejo" Heavy Bluegrey.

"CoolMiniOrNot"WIPs - Korg is being painted from the base upwards

I then began working on the sculpt's camera equipment by patiently picking out all its metallic components with a smidgeon or two of "Vallejo" Gunmetal and a splash of "Citadel" Nuln Oil. In addition, I managed to get a dollop of "Vallejo" Heavy Red onto the actual shutter button, and later darken it with a bit of "Citadel" Carroburg Crimson. 

Doop himself was washed using plenty of "Citadel" Biel-Tan Green, before being dry-brushed with (more) Ethereal Green by "Two Thin Coats". The ally of Howard the Duck's X-Symbol was subsequently carefully traced out with some "Citadel" Abaddon Black. I did consider adding a little dark green to the emblem - as seen in a couple of the comic books. But in the end decided to leave it plain - which seemed to be the predominant canon colour scheme. However, I was convinced to add a little "Vallejo" Heavy Red and "Citadel" Carroburg Crimson" to the Krakoan's eyes, as well as dot the pupils with "Citadel" Abaddon Black.

"Atomic Mass Games" WIPs - Count Dooku is almost finished

Sticking with my plan to paint a number of these Marvel United gaming pieces to use with the Marvel Multiverse RPG, I have set to work on Korg. The Kronan gladiator is one of the first allies encountered in the MMRPG's Escape From Planet Hulk Starter Set, so before I dive into that beginner's adventure I thought I'd better get him tabletop ready.

Furthermore, I've managed to make a little more progress on my aspiration to paint several of the figures from Star Wars: Shatterpoint by "Atomic Mass Games". To begin with I plan to simply focus upon a few of my favourite characters from the Prequel Trilogy, starting with Sir Christopher Lee's Count Dooku. I really don't know how many of these rather expensive plastic 40mm miniatures I'll get finished. But I currently own eight of the multi-part models, so would certainly like to get them done before I purchase any more...

"It's Never Felt So Good..."

"...To feel so angry."

This 40mm scale model of Red Hulk is produced by "CoolMiniOrNot", and was unlocked during the company's highly successful January 2023 Kickstarter for "Marvel United: Multiverse" when it achieved an incredible $4,787,626 in funding. Created by Joseph Loeb and Ed McGuiness, the anti-hero figure (and his respective hero/villain cards) can be found in the boardgame's Season Three Promo Box.

Produced in purple hard plastic, Thaddeus E. "Thunderbolt" Ross's alter-ego was primed using a mixture of "Citadel" Abaddon Black and "Vallejo" Heavy Red. The former US military general's trousers were then dry-brushed with some "Vallejo" Heavy Charcoal, before the entire miniature was drenched in "Citadel" Nuln Oil. As a final step to this stage, I later carefully dry-brushed all of the model's flesh with (more) "Vallejo" Heavy Red.

"CoolMiniOrNot" WIPs - Doop now just needs a little tidying up before being finished

With the basics now finished, I set about 'picking out' some of the sculpt's details. As a result, the figure's eyes were first dotted with a little "White Star" by "Two Thin Coats", and subsequently spotted with a smidgeon of Skulker Yellow and "Citadel" Reikland Fleshshade. Furthermore, the Red Hulk's hair and moustache were given a lick of "Vallejo" Neutral Grey (so as to provide a little contrast to his "Vallejo" Heavy Bluegrey base), and sploshed with "Citadel" Nuln Oil. Lastly, these areas were patiently dry-brushed with (more) "Vallejo" Neutral Grey.

I did consider giving the super-strong brute's fingernails a quick layer of "Citadel" Abaddon Black, just like I did way back in 2019 on my "Heroclix" Red Hulk. However, there was some disconcerting 'flash' covering these details on my miniature, so I felt leaving things alone would be the wisest (and sanest) course of action on this occasion. Instead, I simply plonked a little "Vallejo" Dark Vermillion over Thunderbolt's tongue, and darkened it down with a dash of "Citadel" Nuln Oil.

"Atomic Mass Games" WIPs - Count Dooku is being painted from the boots up

Alongside the General, I have also made some more progress on the co-operative boardgame's figure of Doop. The actual X-Force videographer himself is a pretty straightforward project, albeit I'm not a fan of the comic book incarceration's red eyes - preferring them to be plain black. But there is a ton of detail on the quirky-looking character's camera which I've been patiently working through.

Furthermore, I've finally decided to take a little leap into the world of Star Wars: Shatterpoint by "Atomic Mass Games". I don't actually own the core set, nor have any intention of doing so. However, as Sir Christopher Lee's Count Dooku is by far my favourite villain from "a galaxy far, far away". I simply couldn't resist picking Darth Tyranus up...