Monday, 13 June 2022

"A Straw Bear Is A Traditional Character..."

"...That appears in carnival processions or as a separate seasonal custom in parts of Germany."

These three 28mm scale metal models of some Straw Bears are produced by “Crooked Dice Game Design Studio” and can be bought as SKU: MINI 466 from their Villains and Monsters range. The single-cast pieces can also be purchased as part of the Lincolnshire-based company's four-figure Mummer Procession deal, along with a Hobby Horse, Accordionist and Drummer.

This sculpt actually came about as part of the manufacturer's successful "Children of the Fields - Folk Horror 28mm Miniatures" Kickstarter in May 2018, and was unlocked as the campaign's £22,000 stretch goal. At the time I wasn't able to support the project, and only became aware of this particular model's existence when Karl Perrotton suggested it to me recently when I asked him about the prospect of producing something smaller than my recently-painted Strawman.

'The bears may be relatively realistic in appearance or have narrow heads like a long, tapering sheaf.'

As I plan for the Strohbären to act as lesser minions of Winterly Village's sentinel, they were all primed using a couple of coats of “Vallejo” Dark Yellow and liberally drenched in a mixture of “Citadel” Agrax Earthshade and "The Army Painter" Strong Tone Quickshade. Each figure was then heavily dry-brushed with (more) “Vallejo” Dark Yellow, and then later Buff, using a large, soft-bristled make-up brush.

The carnival characters were debatably table-top ready at this stage, but I decided to break up their palette a little bit more by haphazardly applying splotches of “Citadel” Reikland Fleshshade and Biel-Tan Green to certain areas of each model. This hopefully suggests that the Straw Bears' wheat is already at various stages of decomposition. In addition, they were all once again treated to a delicate dry-brush of (more) “Vallejo” Buff.

"Alternative Armies" WIPs - This Retained Knight has been primed, shaded and dry-brushed

Alongside my Straw Bears I have also been piloting the “Citadel” Colour Layer Sons Of Horus Green on a 15mm scale Retained Knight of the Prydian Army by "Alternative Armies". I’m currently eagerly awaiting my pre-order of "Horus Heresy: Age Of Darkness" starter set by "Games Workshop", so thought I'd work out a palette I'm happy with prior to my Sons of Horus legion arriving.

In addition, I've pigmented a good many figures from "The Ion Age" range as Horus Heresy proxy Space Marines, chaotic daemons and Imperial Guard before, so thought the addition of some former Luna Wolves wouldn't look out of place on the tabletop. I actually hope to get enough painted to form a small infantry squad, complete with a dreadnought and (already finished) Battle Taxi...

Friday, 10 June 2022

"Mounted On A Tripod For Long-Range Accuracy..."

"...And with plenty of ammunition, it is an excellent defensive weapon."

These three plastic 15mm miniatures are produced by “Battlefront Miniatures” and can be found inside the company’s Code GE784 sMG34 Machine-gun Platoon blister for “Flames Of War”. The models consist of a choice of two different Non-Commissioned Officers (NCO), a Machine-gunner, Reloader and the Einheitsmaschinengewehr (Universal machine gun) itself.

Unlike my other “FoW” German soldiers however, the NCO was the only model I initially super-glued onto a wooden strip, as the other two infantrymen clearly needed to be in position upon their actual medium-sized base before I primed them all in “Vallejo” German Fieldgrey WWII. In addition, I actually needed to cut away some of the ammunition feed so as to allow the Reloader to lie upon the ground at an angle so as to stop his feet jutting off the end – something which would really trigger my obsessive compulsive disorder (OCD).

"Crooked Dice Game Design Studio" WIPs - Argonauts Command and Strawbears

All three of the models were shaded using “Citadel” Nuln Oil, and dry-brushed with (more) “Vallejo” German Fieldgrey WWII. Their details were then ‘picked out’ predominantly using “Vallejo” Heavy Sienna, Gunmetal, Buff, German Camouflage Dark Green, Heavy Brown and a series of “Citadel” Shades. Lastly, I pigmented the sMG34 Machine-Gun using a combination of “Vallejo” Gunmetal and “Citadel” Nuln Oil.

Alongside the latest addition to my 1944 Beach Defence Company, I have been busy assembling and gluing some recently received figures from "Crooked Dice Game Design Studio". I'm really trying to immediately apply a brush to any new arrivals these days, so as last week's painting challenge, randomly chosen upon the turn of a playing card, was to pigment ten (more) 28mm scale miniatures, I thought I'd 'break the back of them' before the imminent arrival of my Horus Heresy: Age Of Darkness boxed set by "Games Workshop".

"Hero Forge" WIPs - Beekman, the Rambler and Van Dijk

The metal models are all from the Lincolnshire-based manufacturer's Villains and Monsters range, and predominantly consist of the two multi-part figures which make up their Argonauts Command deal, as well as three Strawbears from their Mummer Procession blister. Hopefully, all of these minions should be pigmented over the next few days, as their paint-schemes should mostly match those I've previously concocted for some Titans and the Strawman respectively.

In addition, I have based and primed the trio of comic book heroes I 'sculpted' using "Hero Forge" for this month's "Forgotten Heroes" event. The Rambler, Beekman and the evil Van Dijk are all taken from the "Time's Rambler" graphic novels by "Mooretoons Publishing", and have been 'seated' inside 40mm circular lipped bases so their 'modelled' bases can better align with the grit I ordinarily apply to my models' stands.

Wednesday, 8 June 2022

"A Hover Or 'Lifter' Light Vehicle..."

"...The 'Battle Taxi' combat APC variant which carries Eight Troopers and Two Crew."

This 15mm scale Grey Adder APC Battle Taxi Lifter is sold by “Alternative Armies” and can be purchased as Pack Code IAF036G from the company’s "The Ion Age" range. Supplied as a single piece resin vehicle, it has a "front mounted Angis 12.5mm AP Gun", and is approximately 60mm long, 45mm wide and 25mm tall.

Due to my desire to use the miniature as a test piece for my recently acquired pot of "Citadel" Sons Of Horus Green, I super-glued it to a large-sized plastic "Flames Of War" stand by “Battlefront Miniatures” and primed it using two coats of the aforementioned layer paint. I then shaded the entire automobile with “Citadel” Nuln Oil, before treating it to an enthusiastic dry-brush of (more) "Citadel" Sons Of Horus Green using a soft-bristled make-up brush.

"Crooked Dice Game Design Studio" - The Strawman, Talos, Giant Ape, Titans, Simian Minions and Robots

With the basic bodywork completed, I next applied some "Citadel" Abaddon Black to the Battle Taxi Lifter's flexible skirt and a combination of "Vallejo" Gunmetal and "Citadel" Nuln Oil to the engines, vents and gun. I was actually somewhat tempted to stop at this stage and call the model done, as having perused a fair few of the Legion's fully-pigmented "Games Workshop" vehicles on the internet, the vast majority of them seemed to simply be pure Sons Of Horus Green.

However, having also seen some of the colour schemes for the heretical space marines' armour, I really wanted to give the 'proxy Rhino' a splash of colour, so picked out its top cover and entry hatch in "Citadel" Abaddon Black, as well as a long strip of piping in "Vallejo" Gold and "Citadel" Agrax Earthshade. Finally, I applied one of the Sons Of Horus Legion transfers I've just received from "Games Workshop" onto the vehicle's rear hatchway. At £20 a sheet these decals are incredibly expensive, but seemingly highly sought after as they're already "temporarily out of stock online" despite only being available since this past Saturday.

"Battlefront Miniatures" WIPs - Two MG34 Machine-gun teams

Alongside the Battle Taxi Lifter I have also been working on some other 15mm miniatures, albeit 'proper' historical stuff. One of my earliest weekly painting challenges, randomly chosen upon the turn of a playing card, was to pigment ten German soldiers from the “Hit The Beach” starter set for “Flames Of War”, and having made a couple of false-starts on this small-sized project, I am finally knuckling down with the two remaining sMG34 Machine-gun teams I require to field a full platoon.

In addition, my recently completed Titan by "Crooked Dice Game Design Studio" brought another of my weekly painting challenges to an end. This one required me to finish ten 28mm scale figures, so I thought I'd use it (and last month's Monster May(hem) event) to clear through a number of the Lincolnshire-based manufacturer's models which have been sat upon my hobby desk unloved for a considerable period of time...

Monday, 6 June 2022

"The Mechanical Monsters Ruled With An Iron Fist..."

"...And cold logic by mad scientist Dr Ulysses Argo."

This 28mm scale resin model of a Titan is produced by “Crooked Dice Game Design Studio” and can be bought as SKU: MINI 94 Titan A (Reaching) from their Villains and Monsters range. The kit comes in three parts, and had its arms pinned into place with both some copper wire and green-stuff, before being permanently attached using some super-glue.

Approximately 45mm in height, the large robot is supposed to represent one of Doctor Ulysses Argo’s metallic minions for the second edition of the skirmish rule-set “7TV”. But as I wanted it to tie in with the significantly larger Talos figure I have previously painted, I decided to give the machine a palette more in keeping with the giant statue's appearance in Don Chaffey’s 1963 film “Jason And The Argonauts”.

"Crooked Dice Game Design Studio" WIPs - Three part-way finished Simian Minions

Resultantly, the entire miniature was primed in “Vallejo” Heavy Sienna and later layered with Bronze. The mechanical construct was then shaded using plenty of “Citadel” Agrax Earthshade, before being dry-brushed with (more) “Vallejo” Bronze. Lastly, I applied various amounts of “Citadel” Nihilakh Oxide onto its numerous joints and ridges. These areas were later blended in with the rest of the miniature with a (third) dry-brush of “Vallejo” Bronze.

With the last of my five planned submissions for the Monster May(hem) challenge completed, I have started working on three more of the Lincolnshire-based manufacturer's Simian Minions. These Apes with Baton are the last of this particular sculpt I own, and once finished should provide my "Planet Of The Apes" project with a fair number of Gorilla soldiers.

"CoolMiniOrNot” WIPs - Iron Man and Captain America

In addition, I've spent some time progressing my hard plastic Iron Man figure from the Marvel United boardgame by "CoolMiniOrNot”, I had previously hoped to use "Scalecolor" Ruby Alchemy for the Golden Avenger’s armour. But after applying a shade of "Citadel" Carroburg Crimson to a test area on the sculpt's leg, it soon became clear that at best Shellhead's armoured suit was going to be pink and gold, as opposed to his famous red and gold.

This caused me to search for an alternative solution, and in the end I decided to purchase a bottle of the highly recommended "Vallejo" Red from their Mecha Colour range. In anticipation of the paint's arrival, I decided to give Tony Stark's alter-ego a rough coat of "Vallejo" Heavy Red, and I'm rather pleased I did so too. For disappointingly, the new Mecha Colour, whilst a lovely bright vibrant red, is strangely not metallic in any way, despite being "designed especially for painting Robots, Gundam, Transformer and Gunplas figures..."

Saturday, 4 June 2022

(Lead) Mountain Musings - "Forgotten Heroes" June 2022

Howling Commandos Of S.H.I.E.L.D. - Three previously 'kit-bashed' Forgotten Heroes 
This month's endeavour to shrink my somewhat overwhelming plastic backlog will be strongly influenced by the annual “Forgotten Heroes” challenge over on the “Carrion Crow’s Buffet” website. In the past I’ve attempted a number of different projects ranging from simple paint-jobs through to the odd “Heroclix” kit-bash. However, on this occasion I thought I’d actually sculpt my painting subjects myself, and base the figures upon three comic book characters which I actually created for the “Time’s Rambler” graphic novel series.

Admittedly, I’ve relied upon the excellent “online character design application” “Hero Forge” to help me make the Rambler, Beekman and the despicable Van Dijk recognisable likeliness’s of their printed page counterparts. But everything else about the 3D printed hard plastic models stems from my time travellers’ digitally-drawn escapades, right down to a nautical telescope, a pick-axe and a cluster of uranium crystals.

"Do not meddle in the affairs of Wizards, for they are subtle and quick to anger."

In addition, I plan to finally finish a number of miniatures which have been sat ‘forgotten’ on my hobby table for well over a year, and have already completed a 28mm scale metal model of a wizard sat atop a dice which used to be produced by “Lucid Eye Publications”. This particular magic-user was given to me as a free gift with one of my orders, and is one of five identical figures I have slowly been progressing to help populate my fantasy-flavoured tabletop with some suitable statue/objective markers.

The long-bearded conjurer was initially super-glued upon a 28mm “Games Workshop” circular base, and then permanently attached to one of the 40mm thin-lipped circular bases I use for all my objective markers. The model was primed using an initial coat of "Vallejo" Heavy Sienna, before being layered in a double-helping of Bronze and enthusiastically drenched in “Citadel” Agrax Earthshade.

May 2022 - A number of "7TV" figures have pushed "Crooked Dice Game Design Studio" into the Top Five

My ‘freebie’ was next dry-brushed with (more) “Vallejo” Bronze, and subsequently given an application of “Citadel” Nihilakh Oxide in both its numerous joints and ridges, as well as its dice’s pips. Finally the entire miniature was treated to another (lighter) dry-brush of “Vallejo” Bronze in an attempt to tie the entire paint-job together.

Happily, this past month’s productivity has definitely seen an upturn for the better, predominantly due to the number of large-sized creatures by “Crooked Dice Game Design Studio” I managed to complete for the Monster May(hem) challenge. I still have one final Titan to complete as part of this four-week long event, and may well continue to add to my growing collection of “7TV” figures now I’ve dipped my toe back into the second edition of the “cinematic style skirmish” rule-set.

Tuesday, 31 May 2022

“With Their Electronic Brains Programmed By Doctor Ulysses Argo…”

“…These bronze behemoths are used to threaten, kill and destroy anyone or anything.”

This 28mm scale resin model of a Titan is produced by “Crooked Dice Game Design Studio” and can be bought as SKU: MINI 93 Titan B (Standing) from their Villains and Monsters range. The kit comes in three parts, and had its arms pinned into place with some green-stuff and copper wire, before being permanently attached using some super-glue.

Approximately 45mm in height, the large robot is supposed to represent one of Doctor Ulysses Argo’s metallic minions for the second edition of the skirmish rule-set “7TV”. But as I wanted it to tie in with my previously-painted Talos, I decided to give the machine a palette more in keeping with the titan’s appearance in Don Chaffey’s 1963 film “Jason And The Argonauts”.

"Take this creature back to his cage."

As a result, the entire model was primed in “Vallejo” Heavy Sienna and later layered with Bronze. The construct was then shaded using plenty of “Citadel” Agrax Earthshade, before being dry-brushed with (more) “Vallejo” Bronze. Lastly, I applied various amounts of “Citadel” Nihilakh Oxide onto its numerous joints and ridges. These areas were later blended in with the rest of the miniature with a (third) dry-brushed of “Vallejo” Bronze.

With the fourth of my five planned submissions for this month’s Monster May(hem) challenge ‘in the books’, I also found the time to finish another of the Simian Minions I had hoped to recently complete. Also manufactured by “Crooked Dice Game Design Studio”, and available as SKU: MINI 98, the ape soldier was undercoated using "Citadel" Abaddon Black, and dry-brushed in Vallejo" Heavy Charcoal.

Alternative Armies" WIPs - A test piece to try out "Citadel" Sons Of Horus Green

The gorilla was subsequently drenched in "Citadel" Nuln Oil, before having his trousers and sleeves pigmented using a combination of "Vallejo" Heavy Violet and "Citadel" Druchii Violet. Lastly, the Ape with Baton's face, ammunition belt, rifle and strap were treated to a layer of "Vallejo" Heavy Sienna", whilst his wooden stick was painted using some Charred Brown. All of these areas were eventually shaded using "The Army Painter" Strong Tone Quickshade.

Alongside the Simian Minion, I’ve almost finished a 15mm scale Grey Adder APC Battle Taxi Lifter by “Alternative Armies” which I’ve been using a test piece for some newly acquired “Citadel” Sons Of Horus Green. The large vehicle is the first of several miniatures I intend to ‘field’ as Horus’ treacherous legion, but I’m currently stuck waiting on “Games Workshop” to release some Sons Of Horus decals before I can ‘call this one done’…

Saturday, 28 May 2022

“Isn't He One Of The Titans?”

“Fight Talos with your wits rather than your courage.”

This 28mm scale resin model of Talos is produced by “Crooked Dice Game Design Studio” and can be bought as SKU: MINI 95 from their Villains and Monsters range. The kit comes in three parts, and was originally assembled simply by applying some super-glue on its joints. However, during its painting one of the arms broke off when I accidentally dropped the figure, so had to be pinned back into place with some green-stuff and copper wire.

Approximately 60mm in height, the giant construct is supposed to represent “Doctor Ulysses Argo’s most fearsome creation” for the second edition of the skirmish rule-set “7TV”. But as I wanted it to portray the Island of Bronze’s guardian statue, as forged by the god Hephaestus, I decided to give the automaton a palette more in keeping with its appearance in Don Chaffey’s 1963 film “Jason And The Argonauts”.

The Uncanny X-Men battle Sabretooth across a number of locations

Resultantly, the entire model was primed in “Vallejo” Heavy Sienna and later layered with Brass. Talos was then shaded using plenty of “Citadel” Agrax Earthshade, before being dry-brushed with (more) “Vallejo” Brass. Finally the figure had various amounts of “Citadel” Nihilakh Oxide patiently applied to its numerous joints and ridges. These areas were subsequently blended in with the rest of the miniature with a (third) dry-brushed of “Vallejo” Brass.

With the third of my five planned submissions for this month’s Monster May(hem) challenge completed, I have managed to squeeze in a couple more games of Marvel United: X-Men by "CoolMiniOrNot”. Having decided to utilise the abilities of two super-heroes per player so as to field a quartet of planet-saving mutants, we once again attempted to outfight the seemingly undefeatable Sabretooth once again.

The rampaging Juggernaut smacks into Storm, and then later both Cyclops and Jean Grey

Frustratingly, despite having Jean Grey, Wolverine, Cyclops and Storm all perform quite admirably across the randomly-chosen locations, Victor Creed’s alter-ego continued to successfully hunt down and vanquish the four targets needed for the villain to win the game. So in the end, we placed the ‘recommended starting opponent’ back in the box, and instead pitted our strength against the unstoppable Juggernaut.

This proved a much more balanced foe for us to incapacitate as we continued to become familiar with the game mechanics, and the collaborative team-ups needed to overcome minions, rescue civilians and ultimately defeat Cain Marko. Indeed, despite the super-strong powerhouse rampaging all over the game map, and repeatedly scattering our heroes like bowling pins, we eventually got to the stage where we were able to finally lay a victorious smackdown upon the “prominent member of the Brotherhood of Mutants.”